Calculating Water Level Rise in a Triangular Prism

In summary, a triangular prism with inverted isosceles triangle end pieces is 4m long and has a base of 60cm and height of 40cm. Water is being pumped into it at a rate of 9 L/s. To find the rate of change of water level when the water is 10cm deep, we use the formula dv/dt = dv/dh * dh/dt and replace b with a function of h (using the fact that the triangles formed by the prism and the water are similar). After calculations, the volume of water is 30,000 cm(cubed) and the rate of change is 0.3 cm(cubed)/s when the height is 10cm.
  • #1
mathmann
37
0

Homework Statement


A triangular prism has end peices in the shape of inverted isosceles traingles with bases 60cm and heights 40 cm . It is 4m long and water is being pumped into it at a rate of 9 L/s. How fast is the level of water rising when the water is 10cm deep.


Homework Equations



dv/dt = dv/dh * dh/dt

The Attempt at a Solution



h = 40 - 10 = 30

dv/dt = 9000 cm(cubed)/s
dv/dh = (.5)bhl
= 360 000

dh/dt = 0.025cm(cubed)/s

Is this correct and is there supposed to be another step to this equation?
 
Physics news on Phys.org
  • #2
If I have the geometry of your question right, you have a prism lying with the triangle faces on the side. So as the water fills up, it fills up the triangle.

If this is the configuration, you should be alarmed by your answer which is a constant. By looking at this container, you see that as you fill it with water, the sides become narrower and narrower, meaning it will fill faster. Your answer of the change in height over time should then be a function of the height itself.
 
  • #3
How do I make it a function?
 
  • #4
Mezarashi, because it say an inverted isosceles triangle, I interpret this as meaning that the vertex of the triangle is at the bottom so prism widens toward the top, not narrow.

mathmann, (1/2)bhl is the volume of the entire prism. Draw a picture of the triangle and draw a horizontal line in it representing the water level. It is the volume of the water that you want. Since h is increasing, "b", the length of the base is also increasing. You need to replace b by a function of h.

To do that, look at your picture. You should see that you have two similar triangles- the triangle formed by the end of the prism and the triangle formed by the water. They have exactly the same angles and so are similar. That means that corresponding lenghts are in the same proportions. The top of the prism, divided by the height, 60/40, is equal to the top of the water, b, divided by the height of the water, h: b/h= 60/40. That easily gives you "b" as a function of "h". Replace b in your calculation by that function.

By the way, what course is this? You seem to be consistently posting, in "precalculus", problems that I would consider "calculus".
 
  • #5
Thanks Halls of Ivy

For volume of the water I got 30 000 cm(cubed) and for the rate I got 0.3 cm(cubed)/s when the height is 10 cm. Is this now correct?

FYI : It is a intro to calculus class.
 

FAQ: Calculating Water Level Rise in a Triangular Prism

How do you calculate the volume of a triangular prism?

To calculate the volume of a triangular prism, you can use the formula V = ½ * b * h * l, where b is the base of the triangle, h is the height of the triangle, and l is the length of the prism. This formula applies to all triangular prisms, regardless of whether the base is equilateral, isosceles, or scalene.

How do you calculate the water level rise in a triangular prism?

To calculate the water level rise in a triangular prism, you can use the formula h = V/a, where h is the water level rise, V is the volume of the prism, and a is the area of the base of the prism. This formula assumes that the prism is completely submerged in water.

Can you use the same formula to calculate the water level rise for all types of prisms?

Yes, the formula for calculating water level rise in a triangular prism can be used for all types of prisms as long as the prism is completely submerged in water. However, the formula for calculating the volume of the prism may differ depending on the shape of the prism.

Does the water level rise change if the prism is not completely submerged in water?

Yes, the water level rise will be affected if the prism is not completely submerged in water. In this case, you will need to consider the surface area that is in contact with the water and use the formula h = V/a, where V is the volume of the prism and a is the surface area in contact with the water.

Are there any other factors that may affect the calculation of water level rise in a triangular prism?

Yes, there are other factors that may affect the calculation of water level rise in a triangular prism. These include the density of the liquid, the temperature of the liquid, and any external forces acting on the prism. It is important to take these factors into account when calculating the water level rise in order to get an accurate result.

Similar threads

Back
Top