High-temperature superconductors (abbreviated high-Tc or HTS) are operatively defined as materials that behave as superconductors at temperatures above 77 K (−196.2 °C; −321.1 °F), the boiling point of liquid nitrogen, one of the simplest coolants in cryogenics.
All materials currently known to conduct at ordinary pressures become superconducting at temperatures far below ambient, and therefore require cooling. The majority of high-temperature superconductors are ceramic materials. On the other hand, Metallic superconductors usually work below −200 °C: they are then called low-temperature superconductors. Metallic superconductors are also ordinary superconductors, since they were discovered and used before the high-temperature ones.
Ceramic superconductors are now becoming suitable for some practical use, but they still have many manufacturing issues and there are very few successful practical examples of employment.
Most ceramics are brittle which makes the fabrication of wires from them very problematic.The major advantage of high-temperature ceramic superconductors is that they can be cooled by using liquid nitrogen.
On the other hand, metallic superconductors usually require more difficult coolants - mostly liquid helium. Unfortunately, none of high-temperature superconductors are coolable using only dry ice, and none of them work at room temperature and pressure (they work well below the lowest temperature recorded on Earth). All high-temperature superconductors require some type of cooling system.
The main class of high-temperature superconductors are in the class of copper oxides (only some particular copper oxides).
The second class of high-temperature superconductors in the practical classification is the class of iron-based compounds.Magnesium diboride is sometimes included in high-temperature superconductors: It is relatively simple to manufacture, but it superconducts only below −230 °C, which makes it unsuitable for liquid nitrogen cooling (approximately 30 °C below nitrogen triple point temperature). For example, it can be cooled with liquid helium, which works at much lower temperatures.
Many ceramic superconductors physically behave as superconductors of the second type.
The first high-temperature superconductor was discovered in 1986, by IBM researchers Bednorz and Müller, who were awarded the Nobel Prize in Physics in 1987 "for their important break-through in the discovery of superconductivity in ceramic materials".Some extremely-high pressure superhydride compounds are usually categorized as high-temperature superconductors. In fact, many articles on high-temperature superconductors can be found on this research on high pressure gases, which is not suitable for practical applications. The current Tc record holder is carbonaceous sulfur hydride, beating the previous record held by lanthanum decahydride by nearly 30 °C.
Urgent! Mechanical Properties at high temperature
At first, My cordial respect to all members.
I need help regarding my research study.
I read a paper by Yaguchi, M., T. Ogata, and T. Sakai, Creep strength of high chromium steels welded parts under multiaxial stress conditions...
I need to test a sodium wicking system in high temperature and agitated conditions. The experiment setup seems like it is going to be pretty complicated, however, and I need some direction on where I might get a glass set-up that I could modify. The set-up is as follows:
Solid sodium pellets...
What is the present consensus about it? What do you think is the most plausible mechanism? What do you think is the highest temperature that can be attained, perhaps room temperature?
Hello,
I am looking for a seal design that would seal between the end plate and cylindrical
section of a pressure vessel .
The vessel is made of hastelloy X and has a working pressure of 4000 psi and
a working temperature of 1600 deg F.
-------------
------
...
I am working on a project where I need a high temperature sealing element. You can see the system in the attachment.
My moving object is moving linearly in a motion slot which is constructed on a sheet metal plate. But the surrounding temperature in this process is 500 C degree and there...
I am working on a project where I need a high temperature sealing element. You can see the system in the attachment.
My moving object is moving linearly in a motion slot which is constructed on a sheet metal plate. But the surrounding temperature in this process is 500 C degree and there...
Hello chemists!
In the classical treatment of reaction kinetics, the overall reaction rate is usually written as a constant times the concentration of species raised to some power (called the order of reaction for that species). It is impressed in high school level students that this reaction...
Yesterday they were showing a kind of documentary on how packaged milk is processed and where they mentioned that at a stage milk is heated to a high temperature for a few seconds to kill all bacteria present without affecting the quality and nutrients of milk. I don't exactly remember the...
Hi,
I wanted to ask, which type of heat transfer is generally most important for the transportation of heat especially at high temperatures? Does anybody know this? I am talking about temperatures T>1000 K
I think its common knowledge that the next generation of nuclear reactors are going to operate at much higher temperatures than current designs in order to get away from the Rankin cycle and take advantage of thermochemical cycles, but what is it that makes high temperature reactors (HTR)...
Hi,
I want to electrically heat a uniform block of a known material to a high temperature (about 2000 K). I want to get a rough idea of how much electrical energy I need to supply to raise the material to this temperature so as to gauge what apparatus I will need. How would I go about this...
Folks,
this is my first thread in this forum.
I'm writing my PhD about HTR-Fuel Elements. I'm not quite sure if anyone in this forum knows about this sort of fuel which is totally different to "normal" fuel.
Anyway, I'm looking for informations about research in the US (or global) what...
I did thermodynamics I and II 50 yrs. ago so help me out here.
I note that high temperature and pressure steam is used in turbines and presumably the higher, the better the efficiency. My question is, is the temperature doing anything or is it only necessary to produce the high steam pressure...
Hello, frineds
I have a question
How is it possible to get High Temperature Supercondactor produced by laser radiation?
Maybe we can irradiate a target and the producing plasma will serrle down substrate
Do you have an idea?
Dear all,
I would like to ask a question regarding advanced materials. I am currently working with benzoyl film and its conductivity.
When a conductivity test was performed against the benzoyl film after it was heated up gradually, it showed increase in the conductivity accordingly until...
Hello, could anyone point me to some resources where I can find information about high-temperature polymers? In particular, I am interested in the theoretical aspects of typical structures and how it enables the polymers' thermal properties and possibly other properties. Processing methodology...
Hi guys,
need to purchase some resisters and caps that can tolerate temperatures upto 125 deg. cel.
any ideas where i can find some - or what type i should be looking for??
thanks!
This is a chapter of a book on the history, discovery, and mechanism of superconductivity all the way to the present search on the mechanism for High-Tc superconductors.
http://arxiv.org/abs/cond-mat/0608368
Zz.
Hey everyone,
I found this really interesting article on Technology Review about a new technology that could remove the sulpur from high-temperature fuel cells. The sulpur causes the eventual shut down of these fuel cells, but with this new technology the cells continue working and are...
please help me in cllecting information about High Temperature Superconductor motor. Are they available in the market? how effecient are they? I need to know all their details, properties, design, advanteges.
Thanks all
I'm sick and running a fever. If I take an Advil and my fever goes down, I stop shivering, but as the medicine starts wearing off, I begin to shiver more. I thoguht shivering was a mechanism designed to raise you're body heat, so it doesn't make sense that when I'm running a 103.8 temperature...
Although low temperature superconducting (LTS) switches are pretty common nowadays (used in MRI magnets etc), HTS switches are far less so, in fact I'm wondering whether the one I built recently is the world's first? Does anyone know otherwise? Does anyone care? (I doubt it).
Also, is this...