Workbench Definition and 81 Threads

Hello everyone, First of all, I want to excuse for my not perfect English since it isn't my mother tongue. However, now to my problem, which I'm facing at the moment. As part of my master thesis I have to simulate the application of a fastening device, which I develope during my master...

I have an assembly of two 2D surfaces. I modeled it on SolidWorks however, I could not import it to Ansys in any format. I tried SLDASM, Step and IGES. I tried modelling the same on Workbench modeller. However, I could not figure out a way to model 2D assemblies on the modeller. Can someone...

Hi all, I have started learning ansys workbench for steady state heat transfer based analysis. I am doing this analysis to validate analytical results given for heat transfer from a single plate fin. The fin tip is given a base temperature and heat transfer is calculated for natural...

At my company no one really uses it but I know ANSYS is pushing its development. I am young in my career and I am wondering if I should just focus working in standalone or focus performing analysis from the workbench platform. Do I lose anything doing CFX or something from workbench. I know for...

I am trying to run a simulation (transient analysis) in ANSYS Workbench of a rolling tire on a flexible pavement surface. The tire is a truck tire with pressure of 0.7 MPa. I defined various outputs at consequential small time steps, and I can see the tire gradually inflating until (what...

Dear Friends, Hi,I am senior mechanical engineering student and I'm working on my final project which is designing an AGV vehicle.I designed a space chassis for it and have a problem with analyzing the joint I designed using Solidworks.I do not know how can I should define support...

Hello, I have the following problem: I would like, from a tungsten filament which an electric current is imposed, find the temperature emitted from the filament (Joule heating) on ansys workbench. I have to study a thermoelectrical , but I can not find any tutorial. Does anyone have...

Ansys -- diffrence between ansys multiphysic and WorkBench? Could anyone explain me, What is the diffrence between ansys multiphysic and WorkBench? And how to change the units in Ansys in Multiphysic? Because I'm hving the Problem Description in Inch?

Hi, I am trying to analyze the effects of pressure on the automotive t=ire by modeling and simulating the same in ANSYS workbench. However, I am having trouble applying material conditions to the model. I wish to use mooney rivlin material but when I apply that based on the guidance given by...

I'm just learning how to use Ansys Workbench 13 to analyze static structures. I need to analyze the deformation of a simply supported beam with a concentrated force in the center vertically downward. I have a 3D model of this beam created in Solidworks. How do I create a force in the center...

Hi all, I learned to use Ansys workbench to do mechanical analysis, but never got any result. It always show me an error message: general error happened. The error details is below, "The license is currently in use by another application in this Workbench session such as...

Hi all, I did simple problem, in which assembly is subjected to single load & it is fixed at other end. I used Higher Order Tet element (& tried with Hexdominent Method also) for the casting body. The vonmises stress shows the true results but when i was looking for the Max Principal...

I have a box, the bottom and the four walls are made of grid. I wan to apply load in the box and see how the bottom and the four walls deform (and stress too). How can I do it? I do not want to apply a force to each wire vertically and horizontally. I want to apply a load to the bottom and the...

I am required to do scripting in ansys workbench...i know python, jscript and APDL can be used for this...now how do we really use them? jscript can be used with help of sendcommand() in python for geometric modelling...can we use APDL in python? In Mechanical(formerly simulation) can we...

ANSYS scripting in Workbench... I am not sure whether I am using perfect terminology or not, I want to create a program using ansys workbench such that I will give input/parameters to the program, what all operations/analyses has to be done will be specified in program and will finally obtain...

I have modeled a curved surface to which I need to applied forces defined in a Excel csv sheet. I have successfully created an external data box in the project schematic and tried to import the load into mechanical. The load file I have resembles: X Y Load 0.3...

Hi, i am currently doing a simulation of rotating propeller using ANSYS Workbench v13. May i know how to obtain vibration data? coz i only able to obtain stress, strain & etc for solution.. I am currently using static structural analysis only. Do i have to use random vibration analysis?

hi there is an assembly of parts which i want to do static analyse on. i make the parts in cataia and import them as ''igs'' into workbench.problem 1: there are near 7 parts in my assembly which when gets into ansys , ansys doesn't recognize some of them and doesn't show them but it recognize...

The other night I was in a pub that has been converted from a disused church, they have kept the stained glass windows. One of the windows depicts an angel telling Joseph, the good news, that his fiancée is up the duff, in the background is a carpenter's bench with a vice. I know that about 0...

Hello, I am a new user both in Ansys and in the forum and I am sorry if my question is silly, but I cannot find the solution by myself. I am using Ansys Workbench v.12 static structural in order to find the displacement of various parts of a robotic arm, that are caused by different loads...

Hi everybody, I am designing conical shells in the aim to better understand the launch vehicle adapter and what changing thickness of conical shells will do to buckling load and natural frequency. I have an issue with certain equations I have characteristic equations with a critical axial...

Hello, I am used to use Ansys classic in my work. I just started to learn Ansys Workbench. I am modeling a copper jacketed lead bullet. I modeled the copper case the internal lead part. Now I have two solids. Is there a way to mate them, and use them as one assembly, of solids? Thanks

Hey guys, How do I create my own material in workbench? The material that I need is not available in engineering data. I have all the material properties that I need, just having hard time figuring that out. Thanks in advance

I have a problem that requires me to do a simple simulation of a sheet metal stamping. I have access to Ansys Workbench v12 Academic version, and have familiarized myself with the program and tried to read up on its features and limitations. The simulation is selected as a static structural...

When I model a honeycomb type composite in workbench I tired modeling the core material as an orthogonal material type using solid tet elements and the aluminum face sheets as isotropic shell elements. I base the core material properties off of the honeycomb manufactures data for stiffness...

Hello everybody, that´s a simple question: I have a symmetry problem to analisys using Structural Mechanic on Ansys Workbench. I´ve applied a Symmetry function on Design Modeler. Can I visualize the result on the whole geometry? Thank´s in advance

I have a plate 35mm X 35mm and is about 2mm thick. In the middle of the plate there is a round insert that is a different material that is .1mm thick and 10mm in dia. I am applying a uniform heat flux to the top flat surface for 5sec and then let it cool for another 5sec. When I look at the...

I am doing a nonlinear analysis in, Ansys Workbench, of a fuel tank tied down in an aircraft using cargo straps. I need to know how to insert a command function in Ansys workbench 11 that creates compression only elements (in order to model cargo straps). Based upon what have been reading I...

Hello! I'm doing a simulation in ansys workbench mechanical (12.1) of a cantilever beam (axle) fixed to a wall and loaded radialy at the other end. The funny thing here is that when the mesh is rather coarse the results regarding von-mises stress (at the support where the bending moment is...

Hello all, I have been using ANSYS 10 and now I have to upgrade to ANSYS 12.1 I have read that the Workbench interface has been redesigned from the version 10 that I used to use. Has anyone used this new interface? If so you what are your thoughts? Also, what are your thoughts on the...

Concord Consortium, an educational non-profit, offers a free simulation program called Molecular Workbench, which can be used to learn physics, chemistry and biology through cool simulations. The main page to download the software is: http://workbench.concord.org/modeler/index.html...