Calculating Screws Needed for 12" O/C Gutter on 100' Building

  • MHB
  • Thread starter clhrhrklsr
  • Start date
  • Tags
    Building
In summary, for a 100' - 0" (100 feet 0 inches) long building with a gutter screwed 12" (12 inches) off center (O/C), it would require a total of 101 screws, with the first screw starting at position 0 and the last screw at position 100.
  • #1
clhrhrklsr
23
0
On a 100' - 0" (100 feet 0 inches) long building, how many screws are required to screw gutter to the building 12" (12 inches) off center (O/C)?

Could anyone tell me how this problem would be worked. And sorry there is not image to go by for this, as it is just a word problem.

Thanks.
 
Mathematics news on Phys.org
  • #2
clhrhrklsr said:
On a 100' - 0" (100 feet 0 inches) long building, how many screws are required to screw gutter to the building 12" (12 inches) off center (O/C)?

Could anyone tell me how this problem would be worked. And sorry there is not image to go by for this, as it is just a word problem.

Thanks.

Good morning,

I don't know what this means: 12" (12 inches) off center (O/C) . So I'm going to guess:

1. The distance between 2 adjacent screws is 12'' = 1'.

2. The 1st screw is at position 0 (at the very beginning of the gutter)

3. The last screw is at position 100 (the very end of the gutter).

If (and only if) I understand your question correctly the total amount should be 101 screws.
 

FAQ: Calculating Screws Needed for 12" O/C Gutter on 100' Building

How do I calculate the number of screws needed for a 12" O/C gutter on a 100' building?

To calculate the number of screws needed for a 12" O/C (on center) gutter on a 100' building, you will need to determine the total length of the gutter first. In this case, it is 100 feet. Then, divide the total length by the distance between screws, which is 12 inches. This will give you the number of screws needed for one side of the gutter. Multiply this number by 2 to account for both sides of the gutter and you will have the total number of screws needed for a 12" O/C gutter on a 100' building.

What is the distance between screws for a 12" O/C gutter?

The distance between screws for a 12" O/C gutter is 12 inches. This means that the screws should be placed 12 inches apart from each other along the length of the gutter.

Do I need to account for waste when calculating the number of screws needed?

Yes, it is recommended to account for waste when calculating the number of screws needed. This can be done by adding an extra 10-15% to the total number of screws needed to ensure that you have enough in case of any mistakes or unforeseen circumstances.

Can I use any type of screw for a 12" O/C gutter on a 100' building?

No, it is important to use screws specifically designed for gutters. These screws are usually made of stainless steel or galvanized steel, which are more durable and resistant to rust and corrosion. Using the wrong type of screw could lead to damage or failure of the gutter system.

Is there a specific way to install the screws for a 12" O/C gutter?

Yes, there is a specific way to install screws for a 12" O/C gutter. The screws should be placed through the pre-drilled holes in the gutter and into the fascia board behind it. It is important to make sure the screws are securely fastened and not over-tightened, as this could cause damage to the gutter or fascia board.

Back
Top