Designing a hydraulic servo system

In summary, the speaker is looking for information and resources on designing a servo system that will use hydraulic pressure as an output and force or pressure as an input. They are asking if anyone knows of existing systems or a good starting point for their project, and someone suggests a scientific kit that may be helpful.
  • #1
CharleyK
6
0
Dear all,

For a project I'm going to design a servo system that will output an amplified hydraulic pressure, whereas the input is a force or pressure as well (not per se hydraulic). Output and input must directly connected due to the force feedback.
I don't have a lot of experience with either hydraulics nor creating systems like this so I want to read up some literature before starting on this.

Are there any existing systems that incorporate this concept or do any of you know a good point where to start with this project?

Thanks!
 
Engineering news on Phys.org
  • #2
There's a kids scientific kit that may help with concepts and ideas for your project:

http://www.hometrainingtools.com/air-and-water-power-pneumatic-hydrolic-engines-kit/p/KT-WATRPOW/
 

FAQ: Designing a hydraulic servo system

1. What is a hydraulic servo system?

A hydraulic servo system is a type of control system that uses hydraulic fluid to power and control the movements of a mechanical system. It typically consists of a hydraulic pump, valves, actuators, and sensors that work together to accurately control the position, velocity, and force of a mechanical system.

2. What are the benefits of using a hydraulic servo system?

Hydraulic servo systems offer several benefits, such as high power and force capabilities, precise control over movement and force, and the ability to handle heavy loads. They are also reliable, efficient, and can operate in a wide range of environments and temperatures.

3. How do you design a hydraulic servo system?

The design of a hydraulic servo system involves several steps, including determining the system requirements, selecting the appropriate components, and designing the control algorithms. It is essential to consider factors such as the load, operating conditions, and desired performance when designing a hydraulic servo system.

4. What are the key components of a hydraulic servo system?

The key components of a hydraulic servo system include a hydraulic pump, valves, actuators, and sensors. The pump generates the hydraulic pressure, which is controlled by the valves to actuate the desired movement. The actuators then convert the hydraulic pressure into mechanical force, and sensors provide feedback to the control system for accurate position and force control.

5. How do you ensure the safety and efficiency of a hydraulic servo system?

To ensure the safety and efficiency of a hydraulic servo system, it is crucial to perform regular maintenance and inspections, use high-quality components, and follow proper installation procedures. It is also essential to consider factors such as system pressure, temperature, and fluid cleanliness, as well as implementing safety measures such as pressure relief valves and emergency stop buttons.

Similar threads

RTG crane -- hydraulic motor and linkage design to turn these wheels
Replies
13
Views
2K
How to design hydraulic system and size cooler
Replies
6
Views
2K
Steering Effort on Sailboat w/ Hydraulic Rudder Control
Replies
15
Views
3K
Passive Hydraulic System to Transmit Mechanical Power
Replies
5
Views
3K
Automotive How to calculate hydraulic disc brake size using actuation force?
Replies
15
Views
6K
I How viscous forces affect force transmission in hydraulic systems.
Replies
3
Views
1K
Optimizing Pin Diameter and Column Thickness for Hydraulic Press Design
Replies
3
Views
3K
Calculating Valve Size With a Hydraulic Accumulator
Replies
8
Views
2K
Designing an Actual Vapor-Compression Refrigeration Cycle
Replies
8
Views
3K
Water flow system - Design an Optimization
Replies
2
Views
3K

Hot Threads

Recent Insights

Back
Top