Determine the limit in a Markov process over time

[Karl Karlsson]

TL;DR Summary

Consider the Markov process $p(t + 1) = A\cdot p(t)$ given by the following matrix:
$$A =
\begin{bmatrix}
0,3 & 0 & 0,5 & 0 & 1\\
0 & 0,2 & 0 & 0,6 & 0\\
0,5 & 0 & 0,5 & 0 & 0\\
0 & 0,8 & 0 & 0,4 & 0\\
0,2 & 0 & 0 & 0 & 0
\end{bmatrix}$$
If $p(0) =\begin{bmatrix} a & b & c & d & e\end{bmatrix}^T$ is a stochastic vector, what is $lim_{t→∞} p(t)$?

I have already in a previous task shown that A is not irreducible and not regular, which I think is correct. I don't know if I can use that fact here in some way. I guess one way of solving this problem could be to find all eigenvalues, eigenvectors and diagonalize but that is a lot of work and I doubt that would be the fastest way of solving this problem. I would appreciate if somebody knew a good approach to this problem.

Thanks in advance!

 

[Infrared]

One observation is that if you start in state 1,3, or 5, then you always stay in those states, and similarly for states 2 and 4. So I think it should be sufficient to solve the Markov processes corresponding to $\begin{pmatrix}0.3 & 0.5 & 1\\0.5 & 0.5 & 0\\ 0.2 & 0 & 0\end{pmatrix}$ and $\begin{pmatrix}0.2 & 0.6\\0.8 & 0.4\end{pmatrix}$ separately.

 

[Karl Karlsson]

One observation is that if you start in state 1,3, or 5, then you always stay in those states, and similarly for states 2 and 4. So I think it should be sufficient to solve the Markov processes corresponding to $\begin{pmatrix}0.3 & 0.5 & 1\\0.5 & 0.5 & 0\\ 0.2 & 0 & 0\end{pmatrix}$ and $\begin{pmatrix}0.2 & 0.6\\0.8 & 0.4\end{pmatrix}$ separately.

That's smart, I did not think about that. But it still takes a while to find the eigenvectors for every eigenvalue and then I have to find the inverse of the eigenvectors matrix in order to be able to calculate $A^n = BD^nB^{-1}$. Would that really be the fastest way of solving this?

 

[Infrared]

I don't think you actually need all the eigenvalues/eigenvectors. As long as it exists, the steady-state solution $\lim_{n\to\infty}A^nx_0$ should be a $1$-eigenvector.

 

[Karl Karlsson]

I don't think you actually need all the eigenvalues/eigenvectors. As long as it exists, the steady-state solution $\lim_{n\to\infty}A^nx_0$ should be a $1$-eigenvector.

I get it because in a steady state $A\cdot p(t) = p(t+1)$. But if there are multiple eigenvectors corresponding to $\lambda = 1$, as there are in this case, how do I know which one $\lim_{n\to\infty}A^nx_0$ converges to?

 

[Infrared]

Both of the matrices I wrote down in post $2$ have $1$ as an eigenvalue with multiplicity only $1$.

 

[Karl Karlsson]

Both of the matrices I wrote down in post $2$ have $1$ as an eigenvalue with multiplicity only $1$.

Ok, so if $\begin{bmatrix}j & g & r\end{bmatrix}^T$ is the eigenvector for the 3x3 matrix and $\begin{bmatrix}s & t\end{bmatrix}^T$ is the eigenvector for the 2x2 matrix which are corresponding to $\lambda = 1$, is $lim_{t\rightarrow∞}\vec p(t) = \frac {1} {j+g+r+s+t} \begin{bmatrix}j &s& g &t &r\end{bmatrix}^T$ ?

 

[Infrared]

No, I don't know how you got that. Your answer will have to depend on the initial condition since if you start with a probability $p$ in being in state $1,3,$ or $5$, that will always be the case and should be reflected in your answer.

Did you calculate $\lim_{n\to\infty}\begin{pmatrix}0.3 & 0.5 & 1\\0.5 & 0.5 & 0\\ 0.2 & 0 & 0\end{pmatrix}^n\begin{pmatrix}a\\c\\e\end{pmatrix}$ and likewise for states $2,4$?

 

[Karl Karlsson]

No, I don't know how you got that. Your answer will have to depend on the initial condition since if you start with a probability $p$ in being in state $1,3,$ or $5$, that will always be the case and should be reflected in your answer.

Did you calculate $\lim_{n\to\infty}\begin{pmatrix}0.3 & 0.5 & 1\\0.5 & 0.5 & 0\\ 0.2 & 0 & 0\end{pmatrix}^n\begin{pmatrix}a\\c\\e\end{pmatrix}$ and likewise for states $2,4$?

Yes I see now that what I wrote before is wrong.

I calculated the eigenvector corresponding to eigenvalue 1, which was $\frac {1} {11}\cdot\begin{pmatrix}5\\5\\1\end{pmatrix}$ . But how do I know when the matrix A that was given will go towards $\frac {1} {11}\cdot\begin{pmatrix}5\\0\\5\\0\\1\end{pmatrix}$ ? At what initial conditions?

 

[Infrared]

Well, $\lim_{n\to\infty}\begin{pmatrix}0.3 & 0.5 & 1\\0.5 & 0.5 & 0\\ 0.2 & 0 & 0\end{pmatrix}^n\begin{pmatrix}a\\c\\e\end{pmatrix}$ has to be a $1$-eigenvector, so a multiple of the eigenvector you wrote. Since applying this matrix doesn't change the sum of the entries, can you say what this eigenvector should be?

 

[Karl Karlsson]

Well, $\lim_{n\to\infty}\begin{pmatrix}0.3 & 0.5 & 1\\0.5 & 0.5 & 0\\ 0.2 & 0 & 0\end{pmatrix}^n\begin{pmatrix}a\\c\\e\end{pmatrix}$ has to be a $1$-eigenvector, so a multiple of the eigenvector you wrote. Since applying this matrix doesn't change the sum of the entries, can you say what this eigenvector should be?

Isn't p(t) always a vector where the sum of its entries are 1? So how could the expression go towards anything other than $\frac {1} {11}\cdot\begin{pmatrix}5\\5\\1\end{pmatrix}$?

 

[Infrared]

The sum of the entries in $\begin{pmatrix}a\\b\\c\\d\\e\end{pmatrix}$ is $1$, but not the sum of the entries in $\begin{pmatrix}a\\c\\e\end{pmatrix}.$

 

[Karl Karlsson]

The sum of the entries in (abcde) is 1, but not the sum of the entries in (ace).

Yeah, right, a+c+e<=1. I don't know how i am supposed to know which multiple of the eigenvector $\lim_{n\to\infty}\begin{pmatrix}0.3 & 0.5 & 1\\0.5 & 0.5 & 0\\ 0.2 & 0 & 0\end{pmatrix}^n\begin{pmatrix}a\\c\\e\end{pmatrix}$ goes towards, unless i diagonalize the matrix...

 

[Infrared]

Applying the matrix doesn't change the sum of the entries. So you want the eigenvector whose entries sum to $a+c+e.$

 

[Karl Karlsson]

Applying the matrix doesn't change the sum of the entries. So you want the eigenvector whose entries sum to $a+c+e.$

Right, I had not thought about that. So the answer should be $\frac {a+c+e} {11}\cdot\begin{pmatrix}5\\5\\1\end{pmatrix}$, right?

 

[Infrared]

Yes. So what's your final answer?

 

[Karl Karlsson]

Yes. So what's your final answer?

No, since we should be able to write $\begin{bmatrix} 0,3 & 0 & 0,5 & 0 & 1\\ 0 & 0,2 & 0 & 0,6 & 0\\ 0,5 & 0 & 0,5 & 0 & 0\\ 0 & 0,8 & 0 & 0,4 & 0\\ 0,2 & 0 & 0 & 0 & 0 \end{bmatrix}\cdot\begin{bmatrix} a & b & c & d & e\end{bmatrix}^T = \begin{bmatrix} 0,3 & 0 & 0,5 & 0 & 1\\ 0 & 0,2 & 0 & 0,6 & 0\\ 0,5 & 0 & 0,5 & 0 & 0\\ 0 & 0,8 & 0 & 0,4 & 0\\ 0,2 & 0 & 0 & 0 & 0 \end{bmatrix}\cdot\begin{bmatrix} a & 0 & c & 0 & e\end{bmatrix}^T + \begin{bmatrix} 0,3 & 0 & 0,5 & 0 & 1\\ 0 & 0,2 & 0 & 0,6 & 0\\ 0,5 & 0 & 0,5 & 0 & 0\\ 0 & 0,8 & 0 & 0,4 & 0\\ 0,2 & 0 & 0 & 0 & 0 \end{bmatrix}\cdot\begin{bmatrix} 0 & b & 0 & d & 0\end{bmatrix}^T$
The first term goes towards $\frac {a+c+e} {11}\cdot\begin{pmatrix}5\\0\\5\\0\\1\end{pmatrix}$ and the second term should go towards $\frac {b+d} {7}\cdot\begin{pmatrix}0\\3\\0\\4\\0\end{pmatrix}$. Which means that $lim_{t\rightarrow\infty}p(t) = \frac {a+c+e} {11}\cdot\begin{pmatrix}5\\0\\5\\0\\1\end{pmatrix} + \frac {b+d} {7}\cdot\begin{pmatrix}0\\3\\0\\4\\0\end{pmatrix}$, is this correct?

 

[Infrared]

I think that's right. Perhaps it's a good idea to choose some specific values for the initial condition and evaluate with a computer to check that it's right.