Do RGB Lasers Combine to Create White Light?

In summary, nobody has been able to give a solid answer to the question of whether or not a white spot would appear if a red, green, and blue laser were combined into one spot. It is believed that since lasers are coherent, the three beams would pass through each other without forming a white spot, but it is unclear how our eyes would perceive this. It is also suggested that if the three beams were coherent with each other and shined onto an opaque diffuse surface, white light could be produced. However, this would require careful engineering and it is not certain if this would be perceived as true white light.
  • #1
n0_3sc
243
1
Nobody has been able to give me a solid answer to my question:

If you had a red, green and blue laser, and you combine the three beams to one spot will you see a white spot?
Since lasers are coherent the three beams should pass through each other without forming a white spot. Right? Or do our eyes perceive them to be white?

What if all three beams were coherent with one another ie. synchronous phase between red,blue & green, will you still see a white spot?
 
Physics news on Phys.org
  • #2
n0_3sc said:
Nobody has been able to give me a solid answer to my question:

If you had a red, green and blue laser, and you combine the three beams to one spot will you see a white spot?
Since lasers are coherent the three beams should pass through each other without forming a white spot. Right? Or do our eyes perceive them to be white?

What if all three beams were coherent with one another ie. synchronous phase between red,blue & green, will you still see a white spot?

You must have the correct wavelenght to get that effect I belive. Red is not red, but just one type of red.
 
  • #3
I don't think a "particular" red is needed. Anything that emits a particular wavelength of light has a spectral width.

With black body radiators using a red, blue and green coloured filament bulbs gives white (almost white) when overlapped because their spectral bandwidth is extremely large so they effectively have a 'rainbow' of colours.
 
  • #4
I am not that big on biology, but I believe to perceive white light you only need to stimulate the three types of cones in your eye in roughly equal proportions, so I think red, green, and blue lasers would do the job, regardless of coherence or bandwidth.
 
  • #5
n0_3sc said:
If you had a red, green and blue laser, and you combine the three beams to one spot will you see a white spot? Since lasers are coherent the three beams should pass through each other without forming a white spot. Right?

I think your confusion may have more to do with how we see light.

"...the three beams should pass through each other..."

This makes no sense. The laser light needs to impinge upon a surface and reflect back into our eyes.

If we see a spot that is emitting light that stimulates our red green and blue receptors, then yes,. it should appear white.
 
  • #6
IIRC the eye is more sensitive to yellow-green light, so the receptors would have to receive the correct proportions of light of the three colours to see white as pure white. It's a bit complicated if I'm remembering correctly but essentially they use intensities to map the colour spectrum mathematically.
 
  • #7
Somewhat leaving the topic now, but would it be correct to say that you cannot visually distinguish lasers of different wavelengths (considering sufficiently small bandwidths) as long as they stimulate the same receptor, i.e. any "red" laser is perceived with no more detail than being purely "red"?

The wavelength cutoffs for each receptor are however almost certainly half-maximums or something similar, so there may be enough overlap for this not to be the case.
 
Last edited:
  • #8
n0_3sc said:
Nobody has been able to give me a solid answer to my question:

If you had a red, green and blue laser, and you combine the three beams to one spot will you see a white spot?
Since lasers are coherent the three beams should pass through each other without forming a white spot. Right? Or do our eyes perceive them to be white?

What if all three beams were coherent with one another ie. synchronous phase between red,blue & green, will you still see a white spot?


If you had the right combinations (intensities) and if you shined them all the an opaque diffuse* surface like a white piece of paper and assuming they were nearly colinear then you should see white.

*Once it is reflected off an opaque diffuse surface the coherence is destroyed (or significantly reduced).

You are correct in your assumption that coherent light doesn't mix (in vacuum). It needs to be carefully engineered to produce white (I'm assuming a loose definition of white) light. Although it is possible.
 
Last edited:

FAQ: Do RGB Lasers Combine to Create White Light?

What is laser light?

Laser light is a type of light that is produced by the emission of photons from a laser, a device that converts energy into a highly focused beam of light. This light is monochromatic, meaning it has a single wavelength or color, and it is also coherent, meaning all of the photons are in phase with each other.

How does laser light work?

Laser light is created by stimulating atoms or molecules in a material to release photons. This is typically done by using a process called optical pumping, where energy is supplied to the material in the form of light or electricity. The released photons then stimulate other atoms or molecules to release more photons, creating a chain reaction and resulting in a concentrated beam of laser light.

What are the properties of laser light?

Laser light has several unique properties, including monochromaticity, coherence, and directionality. It also has a high intensity, meaning it can carry a lot of energy, and it can be focused into a small spot, allowing for precision in various applications.

What are some common uses of laser light?

Laser light has a wide range of applications in various fields, including medicine, communications, manufacturing, and entertainment. It is commonly used in surgery, laser printers, barcode scanners, and laser shows. It is also used in research and scientific experiments.

Are there any potential dangers of laser light?

Yes, laser light can be dangerous if not used properly. It can cause eye damage or skin burns if directly exposed to the beam. It is important to follow safety guidelines and use appropriate protective equipment when working with laser light. Additionally, laser light can also interfere with certain electronic devices and should be used with caution in certain environments.

Similar threads

Back
Top