Expanding Plasma: Equation Governing Gas Expansion

In summary, when air is heated to a point where it turns into a plasma, the expansion is governed by the ideal gas law.
  • #1
rich_mmiv
2
0
Hi,

When air is heated to a point where it turns into a plasma, is there any equation which governs how much the gas expands in the explosion?

Thanks
 
Physics news on Phys.org
  • #2
That's rather vague. Generally, you would not have a single equation and what you use depends on what you want to find out and the physical situation. A set of fluid equations, Maxwell's equations and thermodynamic relationships may all be needed.
 
  • #3
rich_mmiv said:
Hi,

When air is heated to a point where it turns into a plasma, is there any equation which governs how much the gas expands in the explosion?

Thanks

You can treat a plasma pretty much as an ideal gas

As the nucear weapon FAQ suggests

NukeFaq

Perfect monatomic gases are of special interest to us here, not only because they are particularly simple to analyze, but because under many extreme physical regimes all matter tends to behave like a perfect monatomic gas (kinetic energy dominates other forms of energy present).

The law for adiabatic expansion and compression is given in the FAQ. Assuming the expansion is adiabiatic ignores the energy loss due to radiation. Presumably the expansion is happening quickly enough that the energy loss to radiation is small, even though the amount of radiation may be large. This assumption really needs to be checked. Assuming it's correct, we can write:

[tex] P * V^\gamma [/tex] = constant

where P is the pressure, V is the volume, and [tex]\gamma[/tex] is 5/3 for a monatomic gas

Combine this with the ideal gas law, and one should be able to find the solution to your question.

The ideal gas law is

P * V = N * R * T

P and V have been previously defined, N is the number of moles in the gas, R is the universal gas constant, and T is the temperature

There's a lot more info in the FAQ, it's worth giving a closer read if you are interested in this problem.

To discuss your particular problem in more detail, I am assuming we are heating up a some number of moles N of air originally at some temperature T to a new, much higher temperature T', dissasociating it in the process.

Assuming the air dissasociates, we will have some greater number of moles of the new gas N'. Since nitrogen is the main component of air, N2 changing to N1 will roughly double the number of moles of gas. This process will of course require a lot of energy. The small percentage of air that is triatomic, such as CO2 and water vapor will make this factor slightly larger than 2.

Originally we had P * V = N * R * T

Keeping the volume constant, the ratio of the new pressure to the old pressure (which would typically be atmospheric pressure) is

P'/P = (N'/N) * (T'/T)

where N'/N should be roughly 2 as I argued previously.

If the expansion then continues adiabatically until P'=P, the volume should increase by a factor of

[tex](\,\frac{N'}{N}\frac{T'}{T}\,)^{\frac{1}{\gamma}}[/tex]

Disclaimer - I think this analysis is correct, but I don't offer a guarantee, thermo isn't one of my strong points.
 

Related to Expanding Plasma: Equation Governing Gas Expansion

What is expanding plasma?

Expanding plasma refers to the process in which a gas expands rapidly and becomes ionized, forming a plasma state. This can occur in various settings, such as in a plasma jet or in a gas discharge tube.

What is the equation governing gas expansion?

The equation governing gas expansion is known as the adiabatic expansion equation, which is given by the formula PV^(γ) = constant, where P is the pressure, V is the volume, and γ is the heat capacity ratio of the gas.

What factors affect the expansion of plasma?

The expansion of plasma can be affected by several factors, including the initial gas pressure, temperature, and the type of gas being expanded. The presence of external magnetic fields or electric fields can also influence the expansion process.

How is the adiabatic expansion equation derived?

The adiabatic expansion equation is derived from the first law of thermodynamics, which states that the change in internal energy of a closed system is equal to the heat added to the system minus the work done by the system. By assuming that the expansion process is adiabatic (no heat transfer), the equation can be derived using basic thermodynamic principles.

What are the applications of expanding plasma?

Expanding plasma has numerous applications in various fields, such as in plasma physics research, materials processing, and propulsion systems. It is also used in plasma TVs, fluorescent lighting, and plasma sterilization. Additionally, expanding plasma can be used to simulate extreme conditions in the universe, such as in supernovas and black holes.

Similar threads

Replies
2
Views
1K
Replies
1
Views
976
Replies
1
Views
980
Replies
2
Views
1K
Replies
0
Views
382
Replies
13
Views
3K
Replies
22
Views
12K
Back
Top