Finding Probabilities of Spin 1/2 System Measurement

In summary, the conversation discusses a problem involving a system composed of two spin 1/2 particles and its Hamiltonian. The initial state of the system is given and the goal is to find the time evolution of the state and the possible outcomes and probabilities when measuring the operator S^2. The conversation includes steps and hints to find the energy eigenvalues and the final state, and concludes with a discussion about the eigenvalues of the operator S^2.
  • #1
Erythro73
44
0
[SOLVED] Addition of Spin 1/2

Homework Statement


A system is composed of two spin 1/2. The system's hamiltonian is [itex]H=w_1 S_1z + w_2 S_2z[/itex]. The initial state of the system is, at t=0,
[itex] | \psi (0) > = \frac{1}{\sqrt(2)}[|+ -> + |-+>] [/itex].

a) At time t, we measure [itex] S^2 = (S1+S2)^2 [/itex] What results can we find and with what probabilities?

Homework Equations


[itex] H\psi = E\psi [/itex]


The Attempt at a Solution


So, I think the first step is to find the Hamiltonian of my system to know how the system will evolve, as we need the eigenvalues of the energy in the exponential.

So I thought of doing

[itex] (w_1 S_1z + w_2 S_2z)|\psi (0) > = E|\psi(0)> [/itex]. But, here, I'm not so sure of what to do. I mean, [itex] S_1z [/itex] is a two-D operator while psi(0) is a 4x1 matrice (0 1 1 0) (placed vertically). This matrix product doesn't seem correct to my senses.
 
Physics news on Phys.org
  • #2
hum... instead, using [itex] S_1z|+ - > = \frac{\hbar}{2} |+-> [/itex] and so on, I have the eigenvalue [itex] E=\frac{\hbar}{2}(w_1 - w_2). [/itex]. The problem is... am I not supposed to have more than one eigenvalue of energies? Because the eigenvalue equation [itex] H\psi = E\psi [/itex] then gives me

[itex]\frac{\hbar}{2\sqrt 2}(w1-w2)[|+-> + |-+>]=E\psi [/itex].

I seem to have advanced to the solution. But I don't know where to go from there :S?
 
Last edited:
  • #3
What is the time evolution of the state

[itex] | \psi (0) > = \frac{1}{\sqrt(2)}[|+ -> + |-+>] [/itex]


If the hamiltonian is given by :
[itex]H=w_1 S_{1z} + w_2 S_{2z}[/itex] ?

(I assume you meant this, so i fixed your latex code)

So first find [tex] \psi (t) [/tex], by applying the time evolution operator to [tex] \psi (0) [/tex].

then you apply the operator [itex] S^2 = (S1+S2)^2 [/itex] and find the possible outcomes and probs.

----

So you have [tex] \psi (0) [/tex], decompose it, a hint;)
 
Last edited:
  • #4
Erythro73 said:
I seem to have advanced to the solution. But I don't know where to go from there :S?

also

[itex] S^2 = (S_1+S_2)^2 [/itex] You manipulate a bit.
 
  • #5
malawi_glenn said:
What is the time evolution of the state

[itex] | \psi (0) > = \frac{1}{\sqrt(2)}[|+ -> + |-+>] [/itex]


If the hamiltonian is given by :
[itex]H=w_1 S_{1z} + w_2 S_{2z}[/itex] ?

(I assume you meant this, so i fixed your latex code)

So first find [tex] \psi (t) [/tex], by applying the time evolution operator to [tex] \psi (0) [/tex].

then you apply the operator [itex] S^2 = (S1+S2)^2 [/itex] and find the possible outcomes and probs.

----

So you have [tex] \psi (0) [/tex], decompose it, a hint;)
Hi malawi, thanks for your help,
Yes, that is what I was trying to do (I need energy eigenvalues in order to apply the time evolution operator). The problem is actually finding energy eigenvalues...

Using your idea of decomposing [itex] \psi(0) [/itex], maybe it would be a nice idea to express [itex] \Psi(0)[/itex] in the hamiltonian basis and then actually find the eigenvalues of [itex] [\psi(0)]_E [/itex].

Then, I would have energy eigenvalues... right...?
 
  • #6
Erythro73 said:
Hi malawi, thanks for your help,
Yes, that is what I was trying to do (I need energy eigenvalues in order to apply the time evolution operator). The problem is actually finding energy eigenvalues...

Using your idea of decomposing [itex] \psi(0) [/itex], maybe it would be a nice idea to express [itex] \Psi(0)[/itex] in the hamiltonian basis and then actually find the eigenvalues of [itex] [\psi(0)]_E [/itex].

Then, I would have energy eigenvalues... right...?

Oki, if I start, then you can fill in the rest.. (we shall now find the evolved state [tex] \psi (t) [/tex])

Time-ev op: [tex] U(t,0) = \exp (-iHt/\hbar ) [/tex]

initial state: [itex] | \psi (0) > = \frac{1}{\sqrt(2)}|+ -> + \frac{1}{\sqrt(2)}|-+> [/itex]

So the first ket on the RHS: evolves according to:

[tex] U(t,0) |+ -> = \exp (-i(w_1 S_{1z} + w_2 S_{2z})t/\hbar )|+ -> = [/tex]

[tex] \exp (-i(w_1 \hbar / 2 - w_2 \hbar /2)t/\hbar )|+ -> = [/tex] ...

I hope you got the idea, now continue to get the final [tex] \psi (t) [/tex].
 
Last edited:
  • #7
malawi_glenn said:
Oki, if I start, then you can fill in the rest.. (we shall now find the evolved state [tex] \psi (t) [/tex])

Time-ev op: [tex] U(t,0) = \exp (-iH/\hbar ) [/tex]

initial state: [itex] | \psi (0) > = \frac{1}{\sqrt(2)}|+ -> + \frac{1}{\sqrt(2)}|-+> [/itex]

So the first ket on the RHS: evolves according to:

[tex] U(t,0) |+ -> = \exp (-i(w_1 S_{1z} + w_2 S_{2z})/\hbar )|+ -> = [/tex]

[tex] \exp (-i(w_1 \hbar / 2 - w_2 \hbar /2)/\hbar )|+ -> = [/tex] ...

I hope you got the idea, now continue to get the final [tex] \psi (t) [/tex].
Got it! I forgot that subtility of "decomposing" the [itex] \psi [/itex] function. I forgot that the function was a linear combination of the two independant states. I feel somehow ashamed.

So
[itex]
\psi(t)>=\frac{1}{\sqrt 2}|+ -> \exp(-\frac{-i}{2}(w_1 - w_2)t) + \frac{1}{\sqrt 2} |- +>\exp(\frac{-i}{2}(-w_1 +w_2)t))[/itex]

Now, I just have to apply [itex] S^2 [/itex] to my [itex] \psi(t) [/itex] and see what eigenvalues I can have...

[itex] S^2| \psi(t)> \frac{1}{\sqrt 2} ( \exp(\frac{-i}{2}(w_1 - w_2)t) \hbar ^2 [|+-> +[-+> ] + \exp(\frac{-i}{2}(w_2 - w_1)t) \hbar ^2 [|+-> +[-+> ])... [/itex]

Which eventually leads to

[itex] S^2| \psi (t) > = 2\hbar ^2 | \psi (t)> [/itex]

... Which makes me wonder why there's only one eigenvalue...? :S I must be forgetting something somewhere...

THanks for your help.
 
  • #8
It is not THAT straightforward to operate with [tex] S^2 [/tex]

Did you write [tex] S^2 = (S_1 + S_2)^2 = S_1^2+S_2^2 + 2S_{1z}\cdot S_{2z} + ...[/tex] ?
 
  • #9
malawi_glenn said:
It is not THAT straightforward to operate with [tex] S^2 [/tex]

Did you write [tex] S^2 = (S_1 + S_2)^2 = S_1^2+S_2^2 + 2S_{1z}\cdot S_{2z} + ...[/tex] ?

Well, in my course, the teacher developped the expression you wrote and concluded that[itex]
S^2|++>=\frac{3}{4}\hbar^2|++> + \frac{3}{4}\hbar^2|++> + \frac{1}{2}\hbar^2 |++> +0 = 2\hbar^2 |++>
[/itex]
and by similar development :
[itex]S^2|-->=2\hbar^2|-->[/itex]
[itex]S^2|+->=\hbar^2[|+->+|-+>][/itex]
[itex]S^2|-+>=\hbar^2[|+->+|-+>][/itex]

... Did I apply the operator too naively?

I used these identities to calculate the effet of S^2 on my function... Was it wrong :S ?
 
  • #10
if you write [tex] \psi (t) = A(t)|+-> + B(t)|-+> [/tex]

where [tex] A(t) = \exp (-i(w_1 \hbar / 2 - w_2 \hbar /2)t/\hbar )[/tex]

and B(t) is the other exp..

Then see what you get.
 
  • #11
is there a part b) and c) on this question also?

The total spin of a two spin ½ system is either 1 or 0, so S^2 should give you the value 2 or 0, but the problem here is to find out their probabilties as a function of time.

So i think you should take these functions:
[tex] \frac{1}{\sqrt(2)}[|+ -> + |-+>] [/tex] (the spin S = 1, M_s = 0 state)

and [tex] \frac{1}{\sqrt(2)}[|+ -> - |-+>][/tex] (the spin S = 0, M_s = 0 state)

and projectet onto [tex] \psi (t) [/tex]

But I must admit that this was a kinda tricky problem :S
 
  • #12
So, knowing that, we can write that

[itex] S^2|\psi(t)>=A(t) \hbar^2 [|+->+|-+>] + B(t) \hbar^2[|+->+|-+>][/itex].

That means that it is equal to (if I regroup the terms)

[itex](A(t)\hbar^2|+->+B(t)\hbar^2|-+>) + (A(t)\hbar^2|-+> + B(t)\hbar^2|+->) [/itex]

[itex]=(\hbar^2 \psi(t) ) + (\hbar^2 \phi(t)) [/itex]

Where [itex] \phi(t) [/itex] represend the last term.
 
  • #13
malawi_glenn said:
is there a part b) and c) on this question also?

The total spin of a two spin ½ system is either 1 or 0, so S^2 should give you the value 2 or 0, but the problem here is to find out their probabilties as a function of time.

So i think you should take these functions:
[tex] \frac{1}{\sqrt(2)}[|+ -> + |-+>] [/tex] (the spin S = 1, M_s = 0 state)

and [tex] \frac{1}{\sqrt(2)}[|+ -> - |-+>][/tex] (the spin S = 0, M_s = 0 state)

and projectet onto [tex] \psi (t) [/tex]

But I must admit that this was a kinda tricky problem :S
Yes, there's a part b) which is to find out the relation between w1 and w2 so that the probabilities are independant of time. Which, I expect, should be fairly easy once part a) is done ;).

So you are saying that I should try, instead of doing what I wrote in my last message, to write psi(t) in function of the two functions you wrote. OK, but I do not have any minus coming from the relations I used... :S.
 
  • #14
Ok, I got it.

So, to do a small résumé, I

1) Had to find the possible energies to use the time evolution operator. For this, I applied H on |+-> and |-+>.
2) Then, I was able to write my function psi(t)
3) As this function evolve in time, it's not a surprise it would be a linear combination of the two possibles values of spin (1 0) (0 0). So I can write my psi(t) function in a linear combination of (1 0) and (0 0).
4) Happily enough, this is quite simple. I wrote |+-> and |-+> in function of |0 0> and |1 0> and put it in psi(t).
5) Then, I can find quite easily the possible values of S^2, especially if I use some trig. identities involving cos and sin in function of complex exponential.
6) The probabilities are then proportional to cos^2 and sin^2 and the values are 2hbar^2 and 0.

Thank you very much, malawi_glenn. Your help was very much appreciated! :)

P.S. I don't know how to put [Solved] beside my thread's title. But it is pretty much solved.
 
Last edited:
  • #15
Erythro73 said:
Ok, I got it.

So, to do a small résumé, I

1) Had to find the possible energies to use the time evolution operator. For this, I applied H on |+-> and |-+>.
2) Then, I was able to write my function psi(t)
3) As this function evolve in time, it's not a surprise it would be a linear combination of the two possibles values of spin (1 0) (0 0). So I can write my psi(t) function in a linear combination of (1 0) and (0 0).
4) Happily enough, this is quite simple. I wrote |+-> and |-+> in function of |0 0> and |1 0> and put it in psi(t).
5) Then, I can find quite easily the possible values of S^2, especially if I use some trig. identities involving cos and sin in function of complex exponential.
6) The probabilities are then proportional to cos^2 and sin^2 and the values are 2hbar^2 and 0.

Thank you very much, malawi_glenn. Your help was very much appreciated! :)

P.S. I don't know how to put [Solved] beside my thread's title. But it is pretty much solved.

That looks ok and reasonable :) Good work!
 

FAQ: Finding Probabilities of Spin 1/2 System Measurement

What does "Spin 1/2" mean in the context of quantum mechanics?

"Spin 1/2" refers to a quantum property of subatomic particles, specifically their intrinsic angular momentum. It is a fundamental aspect of quantum mechanics and can take on values of either +1/2 or -1/2.

How is the addition of spin 1/2 used in quantum mechanics?

The addition of spin 1/2 is used to describe the behavior and interactions of subatomic particles, such as electrons and protons. It allows us to understand how these particles interact with each other and with external forces.

What is the significance of the term "solved" in the phrase "Solved: Addition of Spin 1/2"?

The term "solved" in this context means that a mathematical model or equation has been developed to accurately describe and predict the behavior of particles with spin 1/2. It is a significant achievement in quantum mechanics and has helped us better understand the microscopic world.

How does the addition of spin 1/2 affect the properties of a particle?

The addition of spin 1/2 can affect a particle's magnetic moment and its energy levels. It also plays a crucial role in determining the particle's behavior in magnetic fields and in certain types of interactions with other particles.

Are there any practical applications of the addition of spin 1/2?

Yes, the addition of spin 1/2 has many practical applications in fields such as quantum computing, nuclear magnetic resonance imaging (MRI), and semiconductor technology. It also helps us understand the properties of materials and how they behave at the atomic level.

Back
Top