Function & Domain - Math Homework

In summary, the function is f(x) = √((A(x))/(B(x))) ≥ 0 and the domain is {x∈ R : √((A(x))/(B(x))) ≥ 0}.
  • #1
MrNeWBiE
75
0
hi ,,,,

Homework Statement



these are the function

1) f(x)=A(x)/B(x)

2) f(x)=√(A(x))

3) f(x)=√(A(x))/(B(x))

4) f(x)=(A(x))/√(B(x))

5) f(x)=√(A(x))/√(B(x))

6) f(x)=√((A(x))/(B(x)))

The Attempt at a Solution



the domain are they right

1) { x∈ R : B(x) ≠ 0 }

2) { x∈ R : A(x) ≥ 0 }

well the other I don't know how to makes them ,,, can you give me some infos ,, i don't want the domains because i want to make them to learn and don't forget them later ,,, :rolleyes:

i don't know how to have the domains because in the lecture the doctor give a example on potato so i got confused :confused::confused:
 
Physics news on Phys.org
  • #2
How can you use 2) to find the domain on 3)?
 
  • #3
The one point about this problem is to realize that in order for x to be an element of the real numbers, the radicand (or the stuff under the square root) cannot be negative, so your objective is to find a domain where there are no imaginary numbers and one would not have to divide by zero, which would make the function undefined...for the first one, x [tex]\in[/tex] [tex]\Re[/tex] means that x is an element of the real number set, and B(x) cannot equal zero because this would make the denominator equal to zero and therefore make the function undefined (that one is easy though). The main problems are going to occur when you have fractions or square roots (this is true for every domain, not just the ones shown).

So as another example...for 4), we have two problems with B(x) and no problems with A(x), so first of all, B(x) cannot be negative because it is within a square root (in order for x to be an element of the real numbers), so we now have B(x) [tex]\geq[/tex] 0, but it is also in the denominator, and the square root of zero equals zero, so B(x) cannot equal zero...so therefore in the "greater than or equal to" sign, we can eliminate the "or equal to" and simply have B(x) > 0...so our final domain is {x [tex]\in[/tex] [tex]\Re[/tex]: B(x) > 0} which in English means that, for x to be an element of the real numbers, B(x) must be greater than 0, or in other words positive.
 
  • #4
3) {x∈ R : A(x) ≥ 0 and B(x) ≠ 0 }
4) {x∈ R : A(x) ≠ 0 and B(x) > 0 }
5) {x∈ R : A(x) ≥ 0 and B(x) > 0 }
6) maybe like the " 5 " but am not sure ,,,

are they right ? or need some changes ?
 
  • #5
number four is incorrect because A(x) can equal zero...I don't know if I mentioned that, but there are never problem spots in the numerator unless there is a radical in the numerator...in this case, f(x) = A(x)/sqrt(B(x)) so there is no problems in the numerator...the only problem is in the denominator because B(x) is both in a radical and on the bottom of the fraction, so it cannot equal zero and must be positive, or B(x) > 0, which you had...you just have to get rid of A(x) ≠ 0... so the correct domain would be {x∈ R : B(x) > 0}
Number six is exactly like five, in fact it is a duplicate...we are simply combining the numerator and denominator into one radical, which has the exact same domain, since the functions are equivalent.
 
  • #6
6) {x∈ R : A(x) ≥ 0 and B(x) > 0 } ?

but our doctor said it's not the same,,,,
 
  • #7
MrNeWBiE said:
6) {x∈ R : A(x) ≥ 0 and B(x) > 0 } ?

but our doctor said it's not the same,,,,

Well, essentially what he wants you to say, is that the ratio of A(x) to B(x) must be greater than zero, rather than each individual subfunction...so basically, you could rewrite the domain as {x∈ R : A(x)/B(x) ≥ 0 and B(x) > 0 }, but technically, the other domain that we already wrote is correct because the only way for the ratio of A(x) to B(x) to be greater than or equal to zero is dependent on the numerator, which is A(x)...so A(x) ≥ 0 is really true...I don't know how else one might write it, unless I misunderstood the function notation, is it the fraction of A(x) over B(x) all within the radical?...if it is, then what I said should be true, unless your professor has some trick he wants you to pick up on...if its not, then let me know what you meant...
 
  • #8
Is it... [tex]\sqrt{\frac{A(x)}{B(x)}}[/tex] ?
 
  • #9
ya it's ,,,,,

both of them in one root ,,,,

tomorrow I have class ,,, I will ask him and will see the answer ,,,,,
 
  • #10
well he told me it's {x∈ R : √((A(x))/(B(x))) ≥ 0 }

i don't know if it's right or no ,,,, can someone check it for me ,,,,
 
  • #11
MrNeWBiE said:
well he told me it's {x∈ R : √((A(x))/(B(x))) ≥ 0 }

i don't know if it's right or no ,,,, can someone check it for me ,,,,
Yes, but that's not where you should quit. For the radical to be nonnegative, B(x) != 0, and A(x)/B(x) > 0. The latter condition means that A(x) and B(x) are the same sign: both positive or both negative.
 
  • #12
{x∈ R : A(x)/B(x) ≥ 0 }

no need for the root ,,, now right ..? that's what he say ,,,
sorry about the first one i wrote it fast so, i wasn't see what i was typing
 
  • #13
Mark44 said:
Yes, but that's not where you should quit. For the radical to be nonnegative, B(x) != 0, and A(x)/B(x) > 0. The latter condition means that A(x) and B(x) are the same sign: both positive or both negative.

B(x) cannot equal zero, it is in the denominator, so that is definitely not right...and I already told you that A(x)/B(x) ≥ 0...it can equal zero as well...but if you multiply both sides of the inequality by B(x) (which you can do), you find that A(x) ≥ 0 which is the correct domain because A(x) is the only thing that makes the function zero, but B(x) must also be positive (NOT EQUAL TO ZERO) in order to make the ratio positive, so B(x) > 0.
 
  • #14
The main point is that there are actually multiple ways to write the domain, as long as they are consistent with the fact that everything under the root must be nonnegative and the denominator of the fraction cannot ever be zero...in order to ensure that, your professor has given you an accurate domain of A(x)/B(x) ≥ 0 ...that is definitely correct because what he is saying is that the ratio CAN EQUAL ZERO, which is true, and the ratio MUST BE NONNEGATIVE in order for x to be in the set of real numbers...
 
  • #15
Mark44 said:
Yes, but that's not where you should quit. For the radical to be nonnegative, B(x) != 0, and A(x)/B(x) > 0. The latter condition means that A(x) and B(x) are the same sign: both positive or both negative.

fedderenator said:
B(x) cannot equal zero, it is in the denominator, so that is definitely not right...and I already told you that A(x)/B(x) ≥ 0...it can equal zero as well...but if you multiply both sides of the inequality by B(x) (which you can do), you find that A(x) ≥ 0 which is the correct domain because A(x) is the only thing that makes the function zero, but B(x) must also be positive (NOT EQUAL TO ZERO) in order to make the ratio positive, so B(x) > 0.
Your logic is faulty. If A(x) < 0 and B(x) < 0, then A(x)/B(x) > 0.

If A(x)/B(x) >= 0, then multiplying by B(x) does not necessarily imply that A(x) >= 0. Remember that multiplying an inequality by a negative number reverses the direction of the inequality.
 
  • #16
aha ,,, but yet I didn't understood you mark ,,,

you want me to find new domain ?
 
  • #17
No, what I'm saying is that there are a couple of ways of describing the domain of f(x) = sqrt(A(x)/B(x)). Your teacher gave you a starting point -- {x | sqrt(A(x)/B(x)) >= 0}. That describes the domain, but doesn't give you any explicit conditions on the functions inside the radical. Your teacher probably wanted you to start with this inequality, and give those conditions on A(x) and B(x).

The conditions I gave earlier are:
  1. B(x) != 0
  2. A(x) and B(x) both positive or A(x) and B(x) both negative.

This is the principal difference between the function of this problem and f(x) = sqrt(A(x))/sqrt(B(x)). For that function, you must have B(x) > 0 and A(x) >= 0.
 
  • #18
aha ,,, now I see what u are meaning
 

FAQ: Function & Domain - Math Homework

What is a function in math?

A function in math is a relationship between two sets of numbers, where each input (or domain) has only one corresponding output (or range). It can be represented by an equation, table, or graph.

How do you determine the domain of a function?

The domain of a function is the set of all possible input values. To determine the domain, you must look at the restrictions on the values of the independent variable (x) in the given function. These restrictions can be in the form of inequalities, excluded values, or a specified range.

What is the range of a function?

The range of a function is the set of all possible output values. It can be determined by looking at the values of the dependent variable (y) in the given function. The range can also be represented by a set of ordered pairs, a table, or a graph.

How do you find the inverse of a function?

The inverse of a function is a new function that results from switching the input and output values of the original function. To find the inverse, you can use the horizontal line test to determine if the original function is one-to-one (each input has a unique output). If it is, then you can swap the x and y variables and solve for y to get the inverse function.

What is the difference between a one-to-one function and a many-to-one function?

A one-to-one function is a function where each input has a unique output. This means that no two different inputs can have the same output. A many-to-one function is a function where multiple inputs can have the same output. This can be represented by a vertical line test, where a one-to-one function will only intersect the graph once, while a many-to-one function can intersect the graph multiple times.

Similar threads

Replies
15
Views
1K
Replies
7
Views
1K
Replies
22
Views
1K
Replies
14
Views
1K
Replies
10
Views
1K
Replies
23
Views
1K
Replies
3
Views
1K
Back
Top