Net Volume/Mass of Fluid Through Surface

In summary, the correct answer for part (b) is 32/3 m^3 for the net volume of fluid and 25792/3 kg for the net mass of fluid.
  • #1
Knissp
75
0
EDIT: NEVER MIND, I got 32/3 for the very next question, so I'm pretty sure the answer that I was comparing this to from the back of my textbook has a typo for the question number. If anyone still wants to check this, that would be OK but I'm pretty sure it's correct.

Homework Statement


Let F(x,y,z) = <2x,-3y,z> be the velocity vector (in m/s) of a fluid particle at the point (x,y,z) in steady state fluid flow.
a) Find the net volume of fluid that passes in the upward firection through the portion of the plane x+y+z=1 in the first octant in 1 s.
b) Assuming that the fluid has a mass density of 806 kg/m^3, find the net mass of fluid that passes in the upward direction through the surface in part (a) in 1 s.


Homework Equations


[tex]\Phi = \int\int F \cdot (r_u \times r_v) dA [/tex]


The Attempt at a Solution


First to parametrize the surface:
x = u; y = v; z = 1 - u - v
[tex]r_u = <1, 0, -1> [/tex]
[tex]r_v = <0, 1, -1> [/tex]
[tex]r_u \times r_v = <1,1,1>[/tex]

[tex]\Phi = \int\int F \cdot (r_u \times r_v) dA [/tex]
[tex]=\int\int <2u,-3v,(1-u-v)> \cdot <1,1,1> dA [/tex]
[tex]=\int\int (2u - 3v + 1 - u - v) dA [/tex]
[tex]=\int_0^1 \int_0^{1-u} (1 + u - 4v) dv du [/tex]
[tex]=\int_0^1 {(v + uv - 2v^2)}_0^{1-u} du [/tex]
[tex]=\int_0^1 ((1-u) + u(1-u) - 2(1-u)^2) du [/tex]
[tex]=\int_0^1 (-1-3u^2+4u) du [/tex]

which equals 0 m^3. This means that the net mass of the fluid that passes through the surface is also 0 kg. BUT the back of the textbook says the answer to part (b) is 32/3. Did I mess up somewhere?
 
Physics news on Phys.org
  • #2


Hello,

Thank you for sharing your solution. It looks like you have correctly parametrized the surface and set up the integral. I followed your steps and got the same result of 0 m^3. However, I believe the mistake may be in the given answer in the back of the textbook. Based on the given velocity vector, it seems like the fluid particle is only moving in the x and y direction, not the z direction. Therefore, the z component of the velocity vector should be 0, not z. This would change the integral to:

\Phi = \int\int <2u,-3v,0> \cdot <1,1,1> dA
=\int\int (2u - 3v) dA
=\int_0^1 \int_0^{1-u} (2 + 2u - 3v) dv du
=\int_0^1 {(2v + v^2 + 2uv)}_0^{1-u} du
=\int_0^1 ((2 + u + 2u - 3u^2)) du
=\int_0^1 (2 + 3u - 3u^2) du

which gives a net volume of 32/3 m^3 and a net mass of 32/3*806 = 25792/3 kg. I hope this helps and please let me know if you have any other questions.
 

FAQ: Net Volume/Mass of Fluid Through Surface

What is the concept of "Net Volume/Mass of Fluid Through Surface"?

The concept of "Net Volume/Mass of Fluid Through Surface" refers to the amount of fluid that passes through a surface over a specific period of time. It is a measure of the rate at which a fluid is moving.

How is the net volume/mass of fluid through surface calculated?

The net volume/mass of fluid through surface is calculated by multiplying the cross-sectional area of the surface by the average velocity of the fluid and the density of the fluid. This gives the volume of fluid passing through the surface per unit time, which can then be converted to mass by multiplying it by the density of the fluid.

What factors affect the net volume/mass of fluid through surface?

The net volume/mass of fluid through surface is affected by the velocity of the fluid, the cross-sectional area of the surface, and the density of the fluid. Other factors such as the shape of the surface and the properties of the fluid (e.g. viscosity) can also have an impact.

Why is the net volume/mass of fluid through surface important in fluid dynamics?

The net volume/mass of fluid through surface is important in fluid dynamics because it helps to understand and analyze the movement of fluids. It is used in various applications such as calculating flow rates, designing hydraulic systems, and studying the behavior of fluids in different conditions.

How is the net volume/mass of fluid through surface measured in real-life situations?

The net volume/mass of fluid through surface can be measured using various instruments such as flow meters, pitot tubes, and ultrasonic sensors. These instruments measure the velocity and cross-sectional area of the fluid and use the density of the fluid to calculate the net volume/mass of fluid passing through a surface.

Similar threads

Back
Top