Open CT Dialog Box in Simulink | Mathworks

In summary, the "Open CT Dialog Box" in Simulink is a tool used for creating and managing continuous-time systems. It can be opened by double-clicking on the "Continuous-Time" block in a Simulink model and allows for adjustment of settings and parameters such as solver type, sample time, initial conditions, and input/output signals. It is available in all versions of Simulink and can be used for both linear and nonlinear systems.
Physics news on Phys.org
  • #2
In the page that you linked, there is an option, Try in Matlab. Upon clicking, it gives the following command: power_ctsat Try this out in matlab, and let us know what you are getting.
 
  • Like
Likes minhduc515

FAQ: Open CT Dialog Box in Simulink | Mathworks

1. What is the purpose of the "Open CT Dialog Box" in Simulink?

The "Open CT Dialog Box" in Simulink is used to specify the continuous-time (CT) settings for a Simulink model. This includes the sample time, solver type, and other options that affect the simulation of the model.

2. How do I access the "Open CT Dialog Box" in Simulink?

To access the "Open CT Dialog Box" in Simulink, go to the "Simulation" tab in the toolbar and click on "Configuration Parameters". Then, select the "Solver" tab and click on the "Open CT Dialog Box" button.

3. Can I change the CT settings for different blocks in my Simulink model?

Yes, you can change the CT settings for individual blocks in your Simulink model. Simply right-click on the block and select "Block Parameters". Then, go to the "Solver" tab and click on the "Open CT Dialog Box" button to specify the CT settings for that specific block.

4. What is the difference between "Fixed-step" and "Variable-step" solver in the "Open CT Dialog Box"?

The "Fixed-step" solver uses a constant time step for the entire simulation, while the "Variable-step" solver adjusts the time step based on the dynamics of the system. The "Fixed-step" solver is often used for simple systems, while the "Variable-step" solver is more suitable for complex systems with varying dynamics.

5. Can I use the "Open CT Dialog Box" to change the sample time of my Simulink model?

Yes, you can use the "Open CT Dialog Box" to change the sample time of your Simulink model. In the "Solver" tab, you can specify the sample time as a fixed value or as a multiple of the sample time of a referenced block. This can be useful for synchronizing the sample time of multiple blocks in a model.

Similar threads

Simulink: Saturation characteristic of saturable transformer
Replies
1
Views
1K
Simulate distance protection in simulink
Replies
1
Views
1K
Voltage measurement on a Current Transformer (CT)
Replies
17
Views
4K
Impedance graph of a transmission line powersystem in MATLAB/simulink
Replies
1
Views
2K
Matlab: Open file with typed filename and/or uigetfile?
Replies
1
Views
2K
B Opening boxes consecutively to find 1 prize
Replies
16
Views
2K
Shouldn't computer math black boxes be shunned?
Replies
17
Views
2K
Math possibly in need of all-open-source software for testin
Replies
12
Views
2K
MATLAB MATLAB API For Wave Flume Data Analysis
Replies
3
Views
2K
B Solving PDEs via FEM: A Gut Check of the Procedure
Replies
0
Views
1K

Hot Threads

Recent Insights

Back
Top