Reverberation Time & Acoustic Power Est. for 100m3 Lecture Theatre

  • Thread starter stephenzztan
  • Start date
  • Tags
    Time
In summary, the Reverberation Time (RT) for a small lecture theatre of volume 100m3 is 0.5 secs, with an average SPL of 64 dB for a certain lecturer. Using the formula RT = nh/c, where ρ = 1.2 kg/m3 and c = 343m/s, we can estimate the mean acoustic power of the lecturer's voice to be approximately 0.5 x 10^(-4) W. However, there is uncertainty as to whether the 64 dB is the power level at the source, so further clarification is needed.
  • #1
stephenzztan
3
0

Homework Statement



The broadband Reverberation Time (RT) for a small lecture theatre of volume 100m3
is measured at 0.5 secs. The average SPL in the theatre for a certain lecturer is 64 dB.
Estimate the mean acoustic power of the lecturer’s voice.
(Take: ρ = 1.2 kg/m3 and c = 343m/s).

Homework Equations



RT = nh/c = [ln10^(-6)]/[ln(1-α)] x 4V/sc


The Attempt at a Solution



I'm not sure about the average SPL given 64dB is for what..?
 
Physics news on Phys.org
  • #2
But if it's the power level at source, then I guess: P = 0.5 x 10^(-4) W Where 0.5 secs is the RT given. I'm not sure if this is the correct approach.. Any help would be greatly appreciated. Thanks.
 

FAQ: Reverberation Time & Acoustic Power Est. for 100m3 Lecture Theatre

What is reverberation time?

Reverberation time is a measure of how long it takes for sound to decay in a room after the source of the sound has stopped. It is typically measured in seconds and is influenced by the size, shape, and materials of the room.

How is reverberation time calculated?

Reverberation time is calculated by measuring the sound decay in a room after a short burst of sound is emitted. The time it takes for the sound level to decrease by 60 decibels is the reverberation time.

Why is reverberation time important in a lecture theatre?

Reverberation time is important in a lecture theatre because it affects the clarity and intelligibility of speech. Too much reverberation can make it difficult for the audience to understand the speaker, while too little can make the sound seem dull and lifeless.

What is acoustic power estimation?

Acoustic power estimation is the process of determining the amount of sound energy that is radiated from a source. This measurement is typically expressed in watts and is important in understanding the overall sound level in a room.

How is acoustic power estimation used in a lecture theatre?

In a lecture theatre, acoustic power estimation is used to determine the appropriate sound system and speaker placement to ensure a balanced and adequate sound level throughout the room. It can also be used to calibrate the sound system and set the proper volume levels for optimal sound quality.

Similar threads

How Do You Calculate Reverberation Time and Sound Levels in an Auditorium?
Replies
1
Views
2K
Acoustics: Sound Level Calculations
Replies
4
Views
12K

Hot Threads

Recent Insights

Back
Top