Understanding Pendulum Motion and Its Relationship to Gravity and Temperature

  • Thread starter nation_unknown
  • Start date
  • Tags
    Pendulum
In summary: It has been so long since I have done any physics. In summary, the person is grateful for the help they have received on their questions, which have taken them 3 to 4 hours to work on. The first question involves finding the acceleration of gravity at a spot based on the periodic oscillations of a pendulum, and the second question involves understanding the effects of temperature on the period of a pendulum. The person has received help in understanding the formulas and concepts involved in solving these questions.
  • #1
nation_unknown
7
0
Hey. I would like to thank everyone in advance for reading my questions and for helping me. I am really greatful for it. I have probably put 3 or 4 hours into these questions but just can not seem to be able to break them down and figure out how to come up with a solution.

Question 1: A pendulum which is 2.00m long makes 84.5 compleate oscillations in 4.00 min. What is the acceleration of gravity at this spot? Show all work and formulas.

Question 2: A grandfather clock uses a large mass suspended at the end of a metal rod as a timing mechanism. The back and forth movement of the mass provides the ticks and tocks for this clock.
An interesting characteristic of this type of clock is that it is sensitive to temperature. Imagine that three identical grandfather clocks are set to the same time and then allowed to run for one week. The clock on the left ran in a room that was hot. The clock on the right wan in a room that was cold. The clock in the center ran in a room that was room temprature.
Sketch the approximate times that the clocks in the hot and cold rooms would show. Explain your answer.

(clock at room temprature points to exactly 9 o'clock).

Thank-you so much for your time and help. any help givin would give me a great boost here :).
 
Physics news on Phys.org
  • #2
You've put in 3 or 4 hours into these questions? Don't you have some work that you can show us? What did you do all those hours?

1) The clock has done "84.5 compleate oscillations in 4.00 minutes" so its period is 4/84.5= 0.047 minutes per oscillation= 2.84 oscillations per second. Do you know a formula for the period of a pendulum?

2) You know, I presume that the formula for the period of a pendulum involves the length of the pendulum (that's why, in problem 1, they have to tell you that the length is 2.00 meters). What normally happens to the length of something (metal,say) when you heat it? When you cool it?
 
  • #3
Sorry for not getting back to you sooner about this, it has been a very busy weekend. For number one i figured that the answer to the problem would have something to do with the formula g=GM/R^2 (i couldn't get the latex thing to work right)where g=gravity, G=6.67x10^-11, M=mass of the pendulum, and r=the radius of the pendulum. From there i tried to figure out what the mass and the radius of the pendulum was based on the information givin however i couldnot come up with any ways to find these. I then tried to work with centripetal acceleration through the equation:
ac=4(pi)^2r/T^2 however even with this i could only get far enough to find everything except the radius (r).

As for your question about me knowing the formula for the period of a pendulum, from what I understand it is T=2(pi)squareroot(l/g)however i can not seem to find g in this question [b(]

The second question (2) i understand a little better now due to your explanation. I was totally stumped before and tried things such as g=GM/R^2 however there was no way to solve it like that. I understand that heat speeds up (expands) the molecules in metal therefore making the length of the pendulum longer and that cold tempratures makes metal contract therefore making the pendulum shorter. Based on T=2(pi)squareroot(l/g) then the clock in a hot room would be a little behind the time of the clock in room temperature because of the extended period and the clock in the cold room would be a little ahead of the clock at room tempertaure because the pendulum would be shorter making for a shorter time period, making isolations shorter. Thank-you for your help on this question but i still am having quite a bit of trouble understanding the first one.
 
  • #4
if you have this equation

[tex]T=2\pi\sqrt{\frac{L}{g}}[/tex]

then you can rearrange for g, and substitute in L and T

also you will want to convert your period into seconds/oscillation, since acceleration (g) is expressed in m/s rather than m/min. Therefore the period is (0.047*60) seconds/oscillation = 2.82 seconds/oscillation

[tex]g=\frac{L}{(\frac{T^2}{4\pi^2})}[/tex]
 
Last edited:
  • #5
Thank you very much for your time. I thought it might be something simple like that. I can't believe I forgot what g was.
 

FAQ: Understanding Pendulum Motion and Its Relationship to Gravity and Temperature

1. What is a quick pendulum?

A quick pendulum is a type of pendulum that is designed to have a short period of oscillation, meaning it takes a short amount of time to swing back and forth.

2. How is the period of a quick pendulum calculated?

The period of a quick pendulum can be calculated using the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.

3. What factors affect the period of a quick pendulum?

The period of a quick pendulum is affected by the length of the pendulum, the acceleration due to gravity, and the amplitude of the swing. The material and weight of the pendulum bob can also have an impact on the period.

4. How is a quick pendulum used in science?

Quick pendulums are commonly used in physics experiments to study the relationship between the length and period of a pendulum. They can also be used to measure the acceleration due to gravity and to demonstrate the principles of simple harmonic motion.

5. What are some real-life applications of quick pendulums?

Quick pendulums are used in timekeeping devices, such as grandfather clocks and metronomes. They are also used in seismometers to detect and measure earthquakes. In addition, quick pendulums are used in some amusement park rides to create a swinging motion.

Back
Top