What happens to a pendulum clock in a lift when the cable breaks?

In summary, the conversation discusses the possible outcomes of a pendulum inside a lift when the cable holding it breaks. It is determined that if the pendulum is at its amplitude, the oscillation will stop and the pendulum will be stationary relative to the lift. If the pendulum is at any other point, it will hit the ceiling or walls of the lift and the oscillation will also stop. The question of whether the pendulum will hit the ceiling or walls is debated, with the conclusion that the answer cannot be determined without knowing the mindset of the question setter.
  • #1
songoku
2,366
348
Homework Statement
A pendulum clock is being operated in a lift. What will happen to the pendulum when the lift cable breaks?
a. oscillation will continue but the period will decrease
b. oscillation will stop
c. oscillation will continue but the period will increase
d. the pendulum will hit the ceiling of lift
Relevant Equations
T = 2π √(L/g)
I think the answer will be either (b) or (d).

If the pendulum is at its amplitude when the cable breaks, then the oscillation will stop since the pendulum is also not moving at that instant.

If the pendulum is at any points except amplitude, then it will hit the ceiling since it still has speed at this instant.

I guess the answer is (d) because the question does not specify that the pendulum is at its amplitude so I assume the pendulum is moving when the cable breaks.

Am I correct? Thanks
 
  • Like
Likes Delta2
Physics news on Phys.org
  • #2
Don't confuse "oscillation will stop" with "pendulum will stop rotating".
 
  • Like
Likes songoku
  • #3
haruspex said:
Don't confuse "oscillation will stop" with "pendulum will stop rotating".
By pendulum rotating you mean it moves in circular?
 
  • #4
songoku said:
By pendulum rotating you mean it moves in circular?
I mean moving relative to the lift. You seem to have interpreted "oscillation will stop" as "will be stationary relative to the lift".
 
  • Like
Likes songoku
  • #5
haruspex said:
I mean moving relative to the lift. You seem to have interpreted "oscillation will stop" as "will be stationary relative to the lift".
Yes that's how I interpreted it :biggrin:

Because I think when the pendulum is at its amplitude, the speed is zero so it is instantaneous at rest so when the cable breaks, the pendulum and lift will move downward with same initial velocity (zero) and same acceleration (gravity) so the pendulum will be stationary relative to lift. Am I wrong?
 
  • #6
songoku said:
Yes that's how I interpreted it
Then why did you rule out b?
 
  • Like
Likes songoku
  • #7
haruspex said:
Then why did you rule out b?
I think I get the hint.

If it is at its amplitude, the oscillation will stop and the pendulum is stationary with respect to the lift.

If it is not at its amplitude, it will move with respect to the lift and will hit the lift (either the left / right side or the ceiling) and the oscillation will also stop

So the answer should be (b) because in either case the oscillation will stop and we can not know for sure whether it will hit the ceiling.

Am I correct? Thanks
 
  • Like
Likes Delta2
  • #8
songoku said:
If it is at its amplitude, the oscillation will stop and the pendulum is stationary with respect to the lift.

If it is not at its amplitude, it will move with respect to the lift and will hit the lift (either the left / right side or the ceiling) and the oscillation will also stop

So the answer should be (b) because in either case the oscillation will stop and we can not know for sure whether it will hit the ceiling.
You have the physics correct. The remaining difficulty is trying to guess the mind-set of the question setter. Do we trust that the question was carefully phrased so that exact word meanings matter? Or do we expect that the focus was on the physics with little care for "trivial" things like wording?

The fact that a collision with the walls was not mentioned as a possibility leads me to distrust the question setter. So I'd pick d.
 
  • Like
Likes songoku
  • #9
jbriggs444 said:
You have the physics correct. The remaining difficulty is trying to guess the mind-set of the question setter. Do we trust that the question was carefully phrased so that exact word meanings matter? Or do we expect that the focus was on the physics with little care for "trivial" things like wording?

The fact that a collision with the walls was not mentioned as a possibility leads me to distrust the question setter. So I'd pick d.
Why do you think (b) is wrong? Or at least not as good as (d)?
 
  • #10
songoku said:
Why do you think (b) is wrong? Or at least not as good as (d)?
If we decide that the question setter is being sloppy then "oscillation stopping" can be read as "relative motion stopping". Since relative motion does not [usually] stop, that would make b wrong in the eyes of the question setter.
 
  • Like
Likes songoku
  • #11
jbriggs444 said:
If we decide that the question setter is being sloppy then "oscillation stopping" can be read as "relative motion stopping". Since relative motion does not [usually] stop, that would make b wrong in the eyes of the question setter.
I'm not sure.
Its relative motion would be to rotate at constant rate, which I would not count as oscillating in an everyday sense. Perhaps one can argue that is still technically an oscillation.
It does not say the pendulum swings from the ceiling of the lift, so no reason to suppose it can hit it; rather, it is described as a clock, which would imply e) it will hit the side of the clock!
 
  • Like
Likes songoku
  • #12
The question (using Einstein's PoE) is the same as the lift hanging in gravity-free space with the pendulum inside it.
(1) If the pendulum is at rest (having exactly reached its amplitude), then it remains at rest.
(2) If the pendulum was moving with a speed ##v##, it undergoes a uniform circular motion with the speed, attached to the string. The centripetal force necessary for such a motion is provided by the tension in the string. Such a tension will pull on the lift at its point of suspension, which the lift has to make up for using its own rigid forces.
 
  • Like
Likes songoku
  • #13
brotherbobby said:
(2) If the pendulum was moving with a speed ##v##, it undergoes a uniform circular motion with the speed, attached to the string. The centripetal force necessary for such a motion is provided by the tension in the string. Such a tension will pull on the lift at its point of suspension, which the lift has to make up for using its own rigid forces.
Won't the string become slack and the tension is zero? I though the motion of the pendulum will be more like projectile motion rather than circular motion
 
  • #14
songoku said:
Won't the string become slack and the tension is zero? I though the motion of the pendulum will be more like projectile motion rather than circular motion
Putting the lift into free fall just removes gravity. What is the motion of a mass attached to a fixed point by a taut string, in the absence of gravity, when given an initial tangential push?
 
  • Like
Likes songoku
  • #15
haruspex said:
Putting the lift into free fall just removes gravity. What is the motion of a mass attached to a fixed point by a taut string, in the absence of gravity, when given an initial tangential push?
I see. It will move in uniform circular motion until it hits something.

Thank you very much for the help haruspex, jbriggs444, brotherbobby
 

FAQ: What happens to a pendulum clock in a lift when the cable breaks?

How does a pendulum clock work in a lift?

The pendulum clock in a lift works by utilizing the force of gravity to keep time. As the lift moves up or down, the pendulum will experience a change in acceleration, causing it to swing faster or slower. This change in acceleration is compensated for by the pendulum's weight and length, allowing it to maintain a consistent rhythm and keep accurate time.

Will a pendulum clock in a lift keep accurate time?

Yes, a pendulum clock in a lift will keep accurate time as long as the lift is moving at a constant speed. Any changes in acceleration or sudden stops and starts may affect the clock's accuracy.

How does the pendulum clock adjust to changes in acceleration?

The pendulum clock is designed to adjust to changes in acceleration by changing the length of the pendulum. This is known as a compensation pendulum and allows the clock to maintain a consistent rhythm despite changes in acceleration.

Does the direction of the lift's movement affect the pendulum clock?

No, the direction of the lift's movement does not affect the pendulum clock as long as the lift is moving at a constant speed. The pendulum will adjust to changes in acceleration regardless of the direction of the lift.

Can a pendulum clock be used in a lift that is constantly changing speeds?

No, a pendulum clock is designed to keep accurate time in a lift that is moving at a constant speed. If the lift is constantly changing speeds, the pendulum will not be able to adjust and the clock will not keep accurate time.

Back
Top