What is the acceleration of the elevator?

In summary, the tension in the cable while an elevator of mass 2442 kg moves upward is 34.2 kN. To find the net force, a free-body diagram can be used to represent the elevator with two forces acting on it: tension pulling up and gravity pulling down. Taking into account the force of gravity, the correct calculation is (10243.98 N / 2442 kg) = 4.2 m/s^2.
  • #1
Abb
4
0

Homework Statement



While an elevator of mass 2442 kg moves upward, the tension in the cable is 34.2 kN

Homework Equations



(a) What is the ?

The Attempt at a Solution


a= f/m
a= 34200N/2442kg =14.0
 
Physics news on Phys.org
  • #2
Your answer is not correct. What is the net force? You've forgotten about gravity.
 
  • #3
Yes, as hage567 already said, you've forgotten about gravity.

Any time you have a question that deals with forces, it's a really good idea to draw a free-body diagram. Draw the object as a dot and then draw arrows representing the forces on the object.

So what would the free-body diagram look like here? You have an elevator with two forces acting on it (if we ignore friction). If we assume the elevator is traveling perpendicular to the surface of the earth, the tension force pulls straight up, and gravity pulls straight down. They have different magnitudes, however.

How do you think you will take the force of gravity into account?

You are right about how to calculate the acceleration once you know the net force acting on the elevator, though.
 
  • #4
hey thanks guys this is first time physics really confused however I think i got the answer but still kind of wrong this is what i did 34200-2442*9.81=1024

F=1024
m=23956

f/m =1024/23956 =0.42m/s^2
the answer should be 4.2m/s^2 i know I m little off calculation what am i doing wrong
 
  • #5
Looks like the first thing you did wrong was that 34200-(2442*9.81)=10243.98 N, not 1024 N.

Also, why is the mass of the elevator now 23956 kg? It should be only 2442 kg.

So, you have (10243.98 N / 2442 kg) = 4.1949 m/s^2 or 4.2 m/s^2.

I hope this helps.
 

FAQ: What is the acceleration of the elevator?

What is acceleration of the elevator?

The acceleration of the elevator refers to the rate at which the velocity of the elevator changes over time. It is measured in units of meters per second squared (m/s²).

Why does the acceleration of the elevator matter?

The acceleration of the elevator is important because it affects the comfort and safety of the passengers inside. A high acceleration can cause discomfort and even injury, while a low acceleration can result in a longer travel time.

How is acceleration of the elevator calculated?

The acceleration of the elevator can be calculated by dividing the change in velocity by the change in time. It can also be calculated by dividing the net force acting on the elevator by its mass, according to Newton's second law of motion.

What factors can affect the acceleration of the elevator?

The acceleration of the elevator can be affected by the weight of the elevator and its passengers, the force of gravity, and the friction between the elevator and the shaft. The design and condition of the elevator and its components can also play a role.

How does the acceleration of the elevator differ between different types of elevators?

The acceleration of the elevator can vary depending on the type of elevator. Hydraulic elevators typically have a slower acceleration compared to traction elevators, which use a counterweight system to provide a smoother and faster acceleration. The acceleration of high-speed elevators can also be significantly higher than standard elevators.

Similar threads

Back
Top