What is the Relationship Between Probability Amplitudes and the Sum of Terms?

In summary: So it's saying the probability of finding the particle at position ##x## is ##\int_{-\infty}^\infty c_1\psi_1(x) d x##.
  • #1
isochore
12
1
Homework Statement
The probability of an event is ## \vert c_1 \psi_1 + c_2 \psi_2 \vert ^2 ##. If ## \vert c_1 \vert ^2 = \vert c_2 \vert ^2 = \frac{1}{2} ##, what can you say about the total probability?
Relevant Equations
See above
I am not sure what I can do with the equation. I realize that ## \vert c_1 \vert ^2 = \vert c_2 \vert ^2 = \frac{1}{2} ## does not mean that ## c_1 ^2 = c_2 ^2 = \frac{1}{2} ## or that ## c_1 = c_2 ##, so I don't know how to use it. I think ideally I might have something like ##P = \vert c_1 \vert ^2 \vert \psi_1 \vert ^2 + \vert c_2 \vert ^2 \vert \psi_2 \vert ^2 + ## (more terms involving ## \psi_1 \psi_2##), but is there a formula or something?
 
Physics news on Phys.org
  • #2
isochore said:
Homework Statement:: The probability of an event is ## \vert c_1 \psi_1 + c_2 \psi_2 \vert ^2 ##. If ## \vert c_1 \vert ^2 = \vert c_2 \vert ^2 = \frac{1}{2} ##, what can you say about the total probability?
Relevant Equations:: See above

I am not sure what I can do with the equation. I realize that ## \vert c_1 \vert ^2 = \vert c_2 \vert ^2 = \frac{1}{2} ## does not mean that ## c_1 ^2 = c_2 ^2 = \frac{1}{2} ## or that ## c_1 = c_2 ##, so I don't know how to use it. I think ideally I might have something like ##P = \vert c_1 \vert ^2 \vert \psi_1 \vert ^2 + \vert c_2 \vert ^2 \vert \psi_2 \vert ^2 + ## (more terms involving ## \psi_1 \psi_2##), but is there a formula or something?

What are ##\psi_1, \psi_2## and what can you assume about them?
 
  • #3
PeroK said:
What are ψ1,ψ2ψ1,ψ2\psi_1, \psi_2 and what can you assume about them?

I think they're just supposed to be wave functions corresponding to some experiment, and ## c_1 ## and ##c_2 ## are supposed to be scalars.
 
  • #4
isochore said:
I think they're just supposed to be wave functions corresponding to some experiment, and ## c_1 ## and ##c_2 ## are supposed to be scalars.
What can you assume about ##\psi_1, \psi_2## mathematically?
 
  • #5
PeroK said:
What can you assume about ψ1,ψ2ψ1,ψ2\psi_1, \psi_2 mathematically?

I guess I'm not following here?
 
  • #6
isochore said:
I guess I'm not following here?

Have you ever heard the terms "normalised" and "orthogonal"?
 
  • #7
Yeah, I have, and it makes sense that it would matter. This is all the info I got with the problem (my professor just asked us to consider it, rather than it being a formal problem), so I guess they're normalised/orthogonal?
 
  • #8
isochore said:
Yeah, I have, and it makes sense that it would matter. This is all the info I got with the problem (my professor just asked us to consider it, rather than it being a formal problem), so I guess they're normalised/orthogonal?
It's the same if that expression involved ordinary vectors. The magnitude would depend on the magnitude of the vectors and their inner product.

I think it's safe to assume ##\psi_1, \psi_2## are orthogonal and normalised.
 
  • #9
Makes sense. My initial thought for getting something like ##P = \vert c_1 \vert ^2 \vert \psi_1 \vert ^2 + \vert c_2 \vert ^2 \vert \psi_2 \vert ^2 + ## (more terms involving ## \psi_1 \psi_2##) was by using the triangle identity, but I don't see a way to get the mixed terms. Is there a different direction to go in?
 
  • #10
isochore said:
Makes sense. My initial thought for getting something like ##P = \vert c_1 \vert ^2 \vert \psi_1 \vert ^2 + \vert c_2 \vert ^2 \vert \psi_2 \vert ^2 + ## (more terms involving ## \psi_1 \psi_2##) was by using the triangle identity, but I don't see a way to get the mixed terms. Is there a different direction to go in?
You need to find out what normalised (magnitude of ##1##) and orthogonal (inner product of ##0##) mean.

Note that the wavefunctions are functions/vectors not numbers.

You must have course notes on this.
 
  • #11
I guess I can expand it, like
## P = (c_1^* \psi_1^* + c_2^* \psi_2^*) (c_1 \psi_1 + c_2 \psi_2) = c_1^* c_1 \psi_1^* \psi_1 + c_2^* c_2 \psi_2^* \psi_2 + c_1^* c_2 \psi_1^* \psi_2 + c_2^* c_1 \psi_2^* \psi_1 = \vert c_1 \vert^2 \vert \psi_1 \vert^2 + \vert c_2 \vert^2 \vert \psi_2 \vert^2 + c_1^* c_2 \psi_1^* \psi_2 + c_2^* c_1 \psi_2^* \psi_1##
So if they are normalised/orthogonal, ##\vert \psi_1 \vert^2 = \vert \psi_2 \vert^2 = 1## and ##\psi_1^* \psi_2 = \psi_2^* \psi_1 = 0 ##, so I would be left with ##\vert c_1 \vert^2 + \vert c_2 \vert^2 ##?
This seems to imply that ##\vert c_1 \psi_1 + c_2 \psi_2 \vert^2 = \vert c_1 \psi_1 \vert ^2 + \vert c_2 \psi_2 \vert ^2 ##, but my professor talked about the importance of differentiating between these two in experiments, specifically that you had to sum the probability amplitudes and not the probabilities because of interference effects? Is there some distinction I don't understand?
 
  • #12
You are treating the wavefunctions like complex numbers. They are functions. I'm on my phone so it's difficult to type too much.

##c_1\psi_1 + c_2\psi_2## is a function. It's magnitude is actually an integral. But the integral has the properties of an inner product, so you don't always have to write out an integral. And the functions have properties of vectors.

The magnitude of a function is defined by

##|\psi|^2 = \langle \psi |\psi \rangle = \int \psi^*(x)\psi(x)dx##

However, when you have an orthonormal basis of wavefunctions, then this is the same as you have for ordinary vectors. The magnitude of a function/vector is simply the square root of the sum of the squares (modulus squared for complex coefficients) of the components. Which is just a generalisation of Pythagoras.
 
  • #13
isochore said:
So if they are normalised/orthogonal, ##\vert \psi_1 \vert^2 = \vert \psi_2 \vert^2 = 1## and ##\psi_1^* \psi_2 = \psi_2^* \psi_1 = 0 ##, so I would be left with ##\vert c_1 \vert^2 + \vert c_2 \vert^2 ##?

This is not right. Orthogonal means:

##\langle \psi_1 |\psi_2 \rangle = 0##
 
  • #14
I was using ##\psi^*## to be ##\langle \psi \vert##, but that's probably not good notation.
So ## P = (c_1^* \langle \psi_1 \vert + c_2^* \langle \psi_2 \vert) (c_1 \vert \psi_1\rangle + c_2 \vert \psi_2\rangle) = c_1^* c_1 \langle \psi_1 \vert \psi_1\rangle + c_2^* c_2 \langle \psi_2 \vert \psi_2\rangle + c_1^* c_2 \langle \psi_1 \vert \psi_2\rangle+ c_2^* c_1 \langle \psi_2 \vert \psi_1\rangle = \vert c_1 \vert^2 \vert \psi_1 \vert^2 + \vert c_2 \vert^2 \vert \psi_2 \vert^2 + c_1^* c_2 \langle \psi_1 \vert \psi_2\rangle + c_2^* c_1 \langle \psi_2 \vert \psi_1\rangle ##.
So if they are normalised/orthogonal, ##\vert \psi_1 \vert^2 = \vert \psi_2 \vert^2 = 1## and ## \langle \psi_1 \vert \psi_2 \rangle = \langle \psi_2 \vert \psi_1 \rangle = 0 ##, so I would be left with ##\vert c_1 \vert^2 + \vert c_2 \vert^2 ##?
 
  • Like
Likes PeroK
  • #15
Generally ##*## denotes the complex conjugate.

Note that because we are dealing with probability amplitudes we have ##|c_1|^2 + |c_2|^2 = 1##.

If we were dealing with classical probabilities we would have ##p_1 + p_2 = 1##. And in this case it's not ##c_1 + c_2## we are interested in.

And, although for an orthonormal basis the cross-terms cancel, they do not in general. What we have done here is not valid for all wavefunctions ##\psi_1, \psi_2##.
 
  • #16
Makes sense - thanks!
 

FAQ: What is the Relationship Between Probability Amplitudes and the Sum of Terms?

1. What is the Sum of Probability Amplitudes?

The Sum of Probability Amplitudes, also known as the amplitude sum rule, is a basic principle in quantum mechanics that states that the probability of a particular event occurring is equal to the squared magnitude of the sum of all possible ways the event can happen. It is used to calculate the probability of outcomes in quantum systems.

2. How is the Sum of Probability Amplitudes calculated?

The sum of probability amplitudes is calculated by taking the square root of the sum of all the individual probability amplitudes squared. This can also be represented mathematically as P = |Ψ₁|² + |Ψ₂|² + ... + |Ψn|², where P is the probability and Ψ is the probability amplitude of each individual event.

3. What is the significance of the Sum of Probability Amplitudes in quantum mechanics?

The Sum of Probability Amplitudes is a fundamental principle in quantum mechanics that allows us to predict the probability of outcomes in quantum systems. It is used in various calculations and experiments, and helps us understand the probabilistic nature of quantum systems.

4. Can the Sum of Probability Amplitudes be greater than 1?

No, the Sum of Probability Amplitudes cannot be greater than 1. This is because the total probability of all possible outcomes in a system must equal 1.

5. How does the Sum of Probability Amplitudes relate to the superposition principle?

The Sum of Probability Amplitudes is closely related to the superposition principle, which states that a quantum system can exist in multiple states at the same time. The Sum of Probability Amplitudes helps us calculate the probability of each possible state in a superposition, and the overall probability of the system's final state.

Back
Top