Digital electronics is a field of electronics involving the study of digital signals and the engineering of devices that use or produce them. This is in contrast to analog electronics and analog signals.
Digital electronic circuits are usually made from large assemblies of logic gates, often packaged in integrated circuits. Complex devices may have simple electronic representations of Boolean logic functions.
[SOLVED] analogue and digital question (really urgent!)
Homework Statement
Hi all; I've got a question:
Two mobile phone signals were sent a bit at a time along the same wire but the bits didn't get separated. They produced the text message below. What message was being carried by each...
Homework Statement
What physics principles are applied to the design and use of digital cameras?
2. The attempt at a solution
• Charging the battery requires electrical and magnet field use from the source it is obtaining the energy from. The battery creates electric potential...
The process known as sampling in reference to music is as follows:
A device called a sampler is used to convert an analog signal representing sound waves into digital information. This digital information is called a sample, artists often use samples in their music. however, this not the only...
Can someone define the process of digital sampling for me, perhaps a website with some info on it. I'm writing a term paper and I keep running into sampler adds, but no concrete facts. What is the function of sampler?
I'm referring to a device that turns an analog recording into a digital...
I have a digital camera but the software does not support windows vista, i have been to the cameras website but there is not a solution listed, am i sunk or is there a way around it?
Thanks.
What do they mean by saying that " If the clock frequency is 45MHz and we use 50MHz then the circuit will not work".
I am confused :rolleyes: I don't understand the timing analysis in digital logic.
Please help me out
-Thanks
I'm trying to design a digital circuit which will accept input from a touchscreen. Does anyone know if a touchscreen is manufactured which has input/output cables which are meant to be read by a digital logic circuit? (yes, it'll be a very complicated digital logic circuit).
Even if I can...
[SOLVED] digital logic design
i want to simplify this function using four-variable map: F(w,x,y,z) = \sum(0,1,2,4,5,7,11,15) , the map contains one "1" at the upper right corner. my question is how can i take this 1 in a group? or what can i do with it?
Greetings all,
I thought I'd post my idea and plan for my digital electronics project here to see if I can get any tips or meet people who may have some expertise on this subject...
The basic idea is a 'lock' that is opened by the correct series of input notes.
Using a PIC, what I'm...
Homework Statement
Draw the schematic circuit diagram that implements the following expression using as few basic gates as possible (AND, OR, NOT, XOR, NAND, NOR).
The prime denotes the complement:
f = w^\prime z^\prime + w^\prime xy + wx^\prime z + wxyz
The Attempt at a Solution
From the...
Is computer data ( stored or transmitted) immune to the effects of QU ? If not then with a program handling billions of bytes of electronic data is corruption due to QU ever an issue
Homework Statement
1. Derive the truth table for the circuit.
2. Derive the Boolean function directly from the circuit.
I can't the function to agree with the truth table. I don't know what I'm doing wrong. I somewhat positive my truth table is right, but I think my function statement is...
Hello All,
I'm wondering if there is a very simple (and cheap) method to transmit data from the board with my microcontroller on it to another board? I was looking around ant patallax has a nice transmitter/receiver pair for about $30 that you can buy here...
Hi everyone, software engineer here that needs help with a basic EE project for an automotive application.
I have a digital hall sensor that goes high (+2v) once per engine revolution. This high signal is used to time the ignition spark, and its frequency is used to determine the engine RPM...
Determine if the CT systems are 1) casual or uncasual 2) memory or memoryless.
Definitions:
Casual: If for any time t1, the output response y(t1) at time t1 resulting from input x(t) does not depend on the values of the input x(t) for t > t1.
Memory: If the output at time t1 depends in...
Hello All,
I am working on a microcontroller-based control circuit that can generate different frequencies for experiments I am working on, but I also want to add a feature that allows the microcontroller to take voltage measurements from my test setups.
The 68HC12 controller board I am using...
Hello All,
I'm still working on my experimental control board and up to this point have been determining the best way to do the phase shifting of the input signal onto three output channels.
After doing some experiments, I realized that a simple 120 degree phase shift between the three...
I have a digital signal from EEG recording. I need to filter 50 Hz frequencies and 0.5 to 120 Hz, so I've tried this:
1. I designed a notch filter with Matlab.
2. I used fft to transform the signal to frecuency domain.
3. I applied the notch filter.
4. I used ifft to get back to time domain...
Hi,I am a graduate student, want to transfer from physics to electrical engineering to study communication and digital signal processing , till now I don't know so much about that.
Next semester, I will be a Teaching Assistant in Electrical engineering for the first year.each semester I must...
I had electronics last semester, and we went over some digital briefly at the end. I think we learned a bit about digital circuits using diodes and something about transitor-transitor logic?
Anyway, at the time I was wondering if there was a way to use Op Amps to create digital circuits.
Hi Guys,
I was hoping someone could explain why commercial satellite uplinks (like those used in TV broadcast) are able to achieve such high bandwidth rates vs. radio uplinks like HAM OSCAR uplinks.
I don’t completely understand how digital modulation is done onto radio wave, but at 1st...
I've got a sequence of pictures from my camera of some very distant buildings (~20mi) that I'd like to digitally enhance. I took about 20 shots in rapid succession in the hopes that I can combine them to produce a better image.
My first attempt will simply be to overlay them in PhotoShop and...
Which has a higher demand in computer engineering today?
And why?
i am stuck in choosing what it would be... i just can't get what these two mean... so it would be better if u please provide explanation for these two courses?
And sorry if this is already been posted before... please give a link
When taking photos with a digital camera there is usually a burst of light before the photon is taken. Why is this? Is it because there is usually not enough light reflecting off the object being photographed. It is this reflected light that is what is being recorded on the film inside.
Im not sure if this is the right place to post this but here's my question. I have to create a counter that outputs a 1 every 4th clock cycle. I can't make a truth table because it doesn't really make sense. I am a newb to digital logic and suck at it. Any one have any help.
Thanks
Jason
hello everyone,
what stuff can i tackle on my own to learn dsp? complex variables and Fourier transforms to begin with - but what else? how do other aspects of EE play into dsp? how do i get functionality fastest!?
first off I'm not looking for ANYONE to do the work for me, I have already spent 3-4 hours a day for the last 6 days on this and I'm stuck. It should be easy but something screwy is going on...
Here are the project specifications: Using a SN74LS193 TTL IC, (an up/down counter with a dual...
Hi,
I am trying to filter noise out of data gathered from an analog to digital converter. I've looked at averaging techniques but I fear that they cause too much data loss. Can anybody recommend other smoothing/filtering techniques that might result in less data loss and can be done...
Hi, I have a electronics problem (surprise surprise)
This is my problem
Current system consists of a sensor which outputs a variable frequency (square wave say between 0Hz and 5000Hz, 0-5V signal)
This frequency is read by a computer, which does stuff based on what the current frequency is...
I need some help designing a Digital elevator simulation using multi media logics. I need some help and guidelines as to how I should get the thruth diagrams, kmaps and the circuit going.
I am required to design a digital circuit which has applications in elevator style controls. My circuit...
Hi!
I have to use a Honeywell-Mellen controller UDC 3200.
To heat up to 1000°C with 5°/C min.
I was programming as follwing:
SRAMP
Time:250
EU/HR: 8500
GAIN: 60.0
but is is still fast heating ?
Have you any idea how to do it?
Thank you in advance!
Okie doke,
I need someone here (or a collection of people working in some sort of synchronized fashion) to write for me a 1500 word assignment on the difference physics wise between analogue and digital tv broadcasting.
Have fun doing it. :D
Hello,
I am not an student, engineer or businessman, just a digital video hobbyist/wannabe filmmaker with an idea for a digital video product, that in my uneducated opinion, would be easy to engineer. I am looking for a person (student or otherwise) with decent knowledge of the U.S. version...
Hey guys, I'm taking a Digital Communications class and we are using the book "Digital Communications" by Bernard Sklar. I have heard from a few people that this book is not as mathematically rigorous as some of the other books in the field and therefore does not provide a deep understanding of...
I will be taking Modern Digital System Design during the Fall 2006 semester at Texas Tech University. As I am an incoming freshman, I have nobody to consult about this class. If someone could please tell me what this class is about, what I should be expecting, and/or what I can do to prepare for...
http://www.gatech.edu/news-room/release.php?id=1017
Also, regarding the recent conversations about text messaging and cheating on tests, there are cell phone neutralizers as well. They are or will soon be in theaters, restaurants, etc.
How to draw signal waveform for this digital word {11001011} ,using these codes:
-OOK(ON-OFF Keying)
-PSK(phase shift keying)
-ASK (amplitude shift keying)
-FSK(frequency shift keying)
I need the guide to go through this problem or at least a useful link.
after applying Fourier transform on the interference picture i get from the object ray and the reference ray (which i captured with a high definition CCD), i can see the object again... but it doesn't look like a hologram to me... its pretty 2d dimensional looking... my guess is that my...
This is a homework question. However, here is what I have thought about.
Here is my formula for the output filtered signal:
Yk = a*Uk + (1-a)Yk-1
Where "a" is coeffiecient that "weights" the current value of the unfiltered signal. And Yk-1 is the previous output signal. For some reason...
Good morning to all.
By laboral reasons I am reading about digital signatures and "public key" cryptography. The most popular of the cryptographic methods related to digital signatures (RSA) is only an application of the "little Fermat theorem". This theorem belongs to "baby" number theory...
I wasn't sure where to drop this topic, so I figured General would be the best place. Anyway, here goes. I'm majoring in Physics/Mathematics and I need to begin work on my thesis soon. Only problem is I don’t have a topic. Whilst trying to find some problems and areas that link automata and...
This project brings up an interesting legal dilemma with basic public key encryption and sharing digital copyrighted material:
http://monolith.sourceforge.net/
----------
Here is the basic gist:
Let's say I have a copyrighted file that is represented by the following bit sequence...
I am building an autoranging digital voltmeter as the subject line suggests and am having a problem with the ICL7107 chip that I am using. Looking at figure 15 on: http://www.intersil.com/data/fn/fn3082.pdf
specifically RefHI and RefLO, with a 2V max input difference between the pos and neg...
This semester, I have a course which is a basic introduction to digital technology. I want to start a general discussion/tutorial on this subject. More specifically, some topics which I would like to cover in this discussion are,
Uniform Quantisation
Sampling
Signal-to-noise ratio (SNR)
Analog...