Homework Statement
Two masses m and M (where M = 2m) are attached with strings. One mass m is suspended from a single verticle string held by two strings each at 45 degrees to the horizontal. The suspending string to the left at 45 degrees is attached to a fixed point. The string on the right...
Homework Statement
Assume a ping pong of mass 3g is falling, and it has fallen 1m and is now traveling at 5 m/s. If the air resistance force is half its weight, how far will it travel in the next 0.1 seconds. [Hint: you may want to sketch a velocity-time graph)
Homework Equations
Understanding...
Homework Statement
Suppose the moon were held in its orbit not by gravity but by a massless cable attached to the center of the earth. Find the tension in the cable.
Homework Equations
F=ma
a=v^2/r
v=2πr/T
(since the pictures aren't working, I'm just going to post the url to the image)...
Homework Statement
Well i have the force which equals 500N and I don't have a given acceleration so should I be substituting 9.81 as the acceleration? or is their another way to find it given that I also have the friction which equals 125N. So which way is the right way of going?
Homework...
Homework Statement
Homework Equations
I have no idea how to start this question, I looked at my notes from class and the textbook but just can't figure out how to start it!
The Attempt at a Solution
Any help would be greatly appreciated! Even if just to get started!Thanks
Thomas
Could someone credible please check my work on this one?
Homework Statement
This problem is "pulling a sled up a slope"
All relevant data is in the picture. I wanted to find FP (The force one has to pull to start the sled moving up with slope).
mass = 26.0kg
μs = 0.096
slope of hill = 12...
Homework Statement
I have this homework question and was able to set up the free body diagrams for the two blocks but got stuck forming the equations in part a. Please help if you can and give explanations - I want to understand the concept for my test coming up.
A block with mass M is pushed...
To test mass affects acceleration.
is it correct to change the mass of plasticine attached to the trolley and measure the length of the ticker tape strip with the constant variable be the angle of the inclined plane?
Question Info:
A fun way to cross a chasm is to use a so-called Zip Line as shown in the figure. Assume that the width of the chasm you are crossing is, 21m . The rope must sag sufficiently so it won't break. Assume the rope can provide a tension force of up to 26kNbefore breaking, and use a...
I saw a joke crib sheet for a physics class that said "F=ma, derive the rest," but is it actually possible to derive at least electricity and magnetism questions from Newton's second law?
PDF: http://www.aapt.org/physicsteam/2014/upload/exam1-2014-2-2-answers.pdf
Homework Statement
A disk of moment of inertia I, mass M, and radius R has a cord wrapped around it tightly as
shown in the diagram. The disk is free to slide on its side as shown in the top down view. A
constant...
I'm new to physics, so I'm sure the explanation is very simple, but I cannot wrap my head around Newton's 2nd law F=ma. It is very easy to understand until I plug 0 into a. Wouldn't this make the force of the reaction disappear?
For instance if a 100kg rock traveling east at constant velocity...
Unfortunately there's no link to the test. This is from the test administered a month ago.
Homework Statement
A choppah is flying horizontally at constant speed. A perfectly flexible uniform cable is suspended beneath the choppah; air friction on the cable is NOT negligible.
Which of...
http://www.aapt.org/physicsteam/2012/upload/exam1-2011-1-3-answers_1.pdf
Homework Statement
You are given a large collection of identical heavy balls and lightweight rods. When two balls are placed at the ends of one rod and interact through their mutual gravitational attraction (as is...
http://www.aapt.org/physicsteam/2010/upload/2009_F-maSolutions.pdf
Homework Statement
Two discs are mounted on thin, lightweight rods oriented through their centers and normal to the discs.These axles are constrained to be vertical at all times, and the discs can pivot frictionlessly on...
http://www.aapt.org/physicsteam/2010/upload/2009_F-maSolutions.pdf
Homework Statement
Two identical objects of mass m are placed at either end of a spring of spring constant k and the whole system is placed on a horizontal frictionless surface. At what angular frequency ω does the system...
Homework Statement
A turntable is supported on a Teflon ring of inner radius R and outer radius R+δ (δ R), as shown in the diagram.
To rotate the turntable at a constant rate, power must be supplied to overcome friction. The manufacturer of the
turntable wishes to reduce the power...
http://www.aapt.org/Programs/contest...08_fnet_ma.pdf
Homework Statement
A uniform circular ring of radius R is fixed in place. A particle is placed on the axis of the ring
at a distance much greater than R and allowed to fall towards the ring under the influence of the
ring’s gravity. The...
Homework Statement
Late correction, this is the 2008 F=ma exam: http://www.aapt.org/Programs/contests/upload/olympiad_2008_fnet_ma.pdf
A mass is attached to the wall by a spring of constant k. When the spring is at its natural length,
the mass is given a certain initial velocity, resulting in...
Homework Statement
Four masses m are arranged at the vertices of a tetrahedron of side length a. What is the gravitational potential energy of this arrangement?
Homework Equations
U = -Gm2 / r
The Attempt at a Solution
The potential energy is the negative of the work done by gravity in...
Homework Statement
A simplified model of a bicycle of mass M has two tires that each comes into contact with the ground at a point. The wheelbase of this bicycle (the distance between the points of contact with the ground) is w, and the center of mass of the bicycle is located midway between...
I am the president of the Physics club at my high school. One of our members came up with a very interesting hypothetical. He asked each of us to re-write the famous Newtonian equation for motion, F=MA(force equals mass times acceleration). Here's the question we are all trying to answer, if...
In some papers I've read, I've seen the authors write down all of the units at the end. For example
##F=ma = 2.3*424.3 [kg*m/s^2]##
In high school, I've never seen the teachers or textbooks write like this. How common is this is method? Assuming one keeps track of their units properly, I...
Hello,
How do i prepare for the F=ma exam? I have taken honors physics, but can only score about 5 on it :( i am taking AP Physics C this year however.
Also, does anyone know where to find old practice tests, with FULL SOLUTIONS (not answer key--Solutions!)?
THanks.
3rd time I'm posting in a day.
Homework Statement
A skier (68 kg) starts from rest but then begins to move
downhill with a net force of 92 N for 8.2 s. The hill levels
out for 3.5 s. On this part of the hill, the net force on the
skier is 22 N [backwards]. T/I
(a) Calculate the...
Homework Statement
A locomotive (6.4 × 10^5 kg) is used to pull two railway cars (Figure 11). Railway car 1 (5.0 × 10^5 kg) is attached to railway car 2 (3.6 × 10^ kg) by a locking mechanism.
A railway engineer tests the mechanism and estimates that it can only withstand 2.0 × 10^5 N of...
Homework Statement
Two people, each with a mass of 70 kg, are wearing inline
skates and are holding opposite ends of a 15 m rope. One
person pulls forward on the rope by moving hand over hand
and gradually reeling in more of the rope. In doing so, he
exerts a force of 35 N [backwards] on...
Is "support force" a "true force"? it seems incompatibe with F=ma
For example if a box is sitting on a table, not moving, it is said that the table exerts a support force on the box.
But the box and the table are both inertial right? so if F = ma (force = mass x acceleration) and...
Could this two equations be used together, since they have a common variable "m"?
For example, you could deduce that the speed of light = sqrt(a*m), and since the speed of light is a constant, if acceleration goes up, then mass must go down.
Is this true?
Hi, I'm wondering how to formulate Newton's second law in terms of Dirac delta functions and standard mass density distributions.
We define the Dirac delta function of a point mass with mass m located at point x0 as follows:
\rho(x)=m\delta (x-x_0)
If our point mass is represented by a...
This isn't a HM question, and I'm asking for an explanation.
This is "The effect of a Radio Wave on an Ionospheric Electron"
The integration is weird, I don't follow what is being done.
a=\frac{-eE}{m} - reworking of F=ma
\frac{-eE}{m}sin(\omega t
only interested in the x axis...
Homework Statement
#24
https://aapt.org/physicsteam/2010/upload/2009_F-maSolutions.pdf
Homework Equations
T = rfsinθ
The Attempt at a Solution
FBD:
Axes: (along the incline is x), perpendicular to that is y:
Down: mgcosθ
Up: N
Right: mgsinθ
Left: Ff (friction)
If the box is...
Homework Statement
#23
https://aapt.org/physicsteam/2010/upload/2009_F-maSolutions.pdf
Homework Equations
P = Fv
The Attempt at a Solution
T = 2∏√(k/m)
x = Asin(wt)
v = Awcos(wt)
a = -Aw2sin(wt)
We are trying to maximize power, which is both dW/dt and Fv.
Force is ma, given...
Homework Statement
https://aapt.org/physicsteam/2010/upload/2009_F-maSolutions.pdf
# 18
Homework Equations
T = 2∏√(L/g)
The Attempt at a Solution
Honestly, I'm not sure how at all to do this question. All I know that the distance from the small peg to mass m is L/3 - so that should...
Homework Statement
An object is thrown with a fixed initial speed v0 at various angles α relative to the horizon. At some constant
height h above the launch point the speed v of the object is measured as a function of the initial angle α.
Which of the following best describes the dependence of v...
The position of a mass m = 28.0 kg is given in by x(t) = 3.0sin ((15.0)t). Calculate the magnitude of the maximum force acting on the mass.
F=ma. I tried deriving x(t) twice to get the acceleration equation so i could plug it into F=ma and then pick a random number for t. I chose t=1 but i...
Homework Statement
A point object of mass M hangs from the ceiling of a car from a massless string of length L. It is observed to make an angle θ from the vertical as the car accelerates uniformly from rest. Find the acceleration of the car in terms of θ, M, L, and g.
Diagram...
Homework Statement
19. A 1,500 Watt motor is used to pump water a vertical height of 2.0 meters out of a flooded basement through a
cylindrical pipe. The water is ejected though the end of the pipe at a speed of 2.5 m/s. Ignoring friction and
assuming that all of the energy of the motor goes...
Hi,
I'm just training for the 2013 F=ma exam, and I took some old exams. I tried to do the 2012 exam, and could not figure out problem 21. Can anyone help me, please?
Homework Statement
A spring system is set up as follows: a platform with weight 10 N is on top of two springs, each with a...
Homework Statement
A block of mass m1 is on top of a block of mass m2. The lower block is on a horizontal surface, and a rope can pull horizontally on the lower block. The coefficient of kinetic friction for all surfaces is μ. What is the resulting acceleration of the lower block if a force F...
Hi,
I'm reading a book and one of the questions asks: how much force is required to give an object weighing 3000lb an acceleration of 12ft/sec2?
I calculated this as F=3000x12=36,000pdl. The answer given is "1125 force" (36,000/32). Why is this? Why isn't it just 36,000pdl?
I thought to myself yesterday: Is there really any way of measuring a force independent of F=ma? I don't see there is so you can more or less take F=ma as the definition of force and then use that to derive the expressions for the fundamental forces of nature. But then it occurred to me: Why did...
Urgent help needed with F=ma concept! Where did I go wrong?? Help please
Use the exact values you enter to make later calculations.
A group of students performed the same "Newton's Second Law" experiment that you did in class. For this lab, assume g = 9.81 m/s2. They obtained the following...
2. A group of students performing Newton's Second Law experiment generated the graph shown below from their data. Which of the following statements is true regarding the trustworthiness of the data? (Select all that apply.)
a) The graph should have a positive y-intercept because a certain...
Homework Statement
An astronaut who is weighing himself inside of a rocket blasting off from the moon with an upward acceleration of 1.26m/s^2 records a scale reading of 188N . The acceleration due to gravity on the moon is 1.67m/s^2 .
Find the mass of the astronaut
Homework Equations...
While two forces act on it a particle is to move at the constant velocity v= (3m/s)I - (4m/s)j. One of the forces is F1=(2n)I +(-6n)j what is the other force?
I want to say (1n)I + (2n)j but then I couldn't decided why that would be true. I guess I liked those numbers because if the mass...
Hello,
The concept of torque has always been confusing to me for a few reasons, but i guess it boils down to two things that really seem to bother me:
1.) We all posses an intuitive sense of the fact that pushing on a lever further away from the fulcrum makes the pushing easier. Most of the...
I know this is probably a complete n00b question, but I have tried all over the www and couldn't find it explained.
Correct any of these premises if they are wrong, maybe that's my problem, but...
velocity is current speed and acceleration is change in speed.
So, if something is moving...
Homework Statement
Use the concepts of momentum and Newton’s second law to explain why a motorcycle can accelerate at a greater rate than a large truck.
Homework Equations
The Attempt at a Solution
The motorcycle will accelerate at a greater rate because the truck has a...