Truck Definition and 305 Threads

Homework Statement A 1000 kg car pushes a 2000 kg truck that has a dead battery. When the driver steps on the accelerator, the drive wheels of the car push against the ground with a force of 4500 N. Rolling friction can be neglected.Homework Equations F=ma acceleration of car = acceleration...

Distance traveled by an accelerating truck with a steel load. With a twist! Homework Statement Consider a large truck carrying a heavy load such as steel beams. A significant hazard for the driver is that the load may slide forward crushing the cab, if the truck stops suddenly in an...

Homework Statement A loaded truck (truck 1) has a maximum engine power P and is able to attain a maximum speed v. Another truck (truck 2) has a maximum engine power 2P and can attain a maximum speed of 1.5v . The two trucks are then connected by a long cable, as shown. To solve this...

I have two questions guys. When a large, heavy truck collides with a passenger car, the occupants of the car are more likely to be hurt than the truck driver. Why? There is a picture of a moving ping-pong ball striking a stationary bowling ball which shows the ping-pong ball hitting the...

Homework Statement A student is riding in the back of a truck traveling along a straight level road at Vt = 20 m/s. He faces toward the rear of the truck and throws a ball with a velocity of 15 m/s at an angle of 37 degrees above the horizontal relative to the truck. He releases the ball 2.0...

Homework Statement A 5000 kg truck is parked on a 14 degree slope. How big is the friction force on the truck? Homework Equations friction = coefficient of friction X normal force The Attempt at a Solution I tried breaking the weight into components. I used 1.00 as the...

Homework Statement A truck is traveling around a 3 degree banked turn at a given constant speed with a given radius of curvature. The weight and center of gravity of the truck are also given. The question asks to determine at which speed the truck will tip over. Homework Equations...

Homework Statement A 1100 kg car pushes a 1700 kg truck that has a dead battery. When the driver steps on the accelerator, the drive wheels of the car push against the ground with a force of 4500N. a.) What is the magnitude of the force of the car on the truck? b.) What is the magnitude of...

1. Homework Statement a truck covers 40m in 8.50s while slowing down to a final speed of 2.80m/s 2. Homework Equations find original speed find it's acceleration 3. The Attempt at a Solution for original speed i think it is 40m/8.50s= 4.7m/s now for acceleration i am not sure...

Homework Statement A 20.0 kg packing case is initially at rest on the floor of a 1400-kg pickup truck. The coefficient of static friction between the case and the truck floor is 0.30, and the coefficient of kinetic friction is 0.20. Before each acceleration given below, the truck is traveling...

If I have a truck with a sloped bed in the back, the truck is accelerating horizontally and there's a block sitting on the slope tied to a rope while all this is happening. I was wondering if the trucks acceleration would cause the normal force being applied to the block by the sloped bed to...

A truck traveling east has a velocity of 26 m/s. (a) Calculate its velocity after accelerating at 1 m/s2. (b) The truck then decelerates at -2 m/s2 for 3 s. Now what is its velocity? (c) The truck then takes 8s to change its velocity to 21 m/s. What was its final acceleration? I tried using...

Homework Statement Thr driver of a car wishes to pass a truck that is traveling at a constant speed of 19.3 m/s. Initially, the car is also traveling at a speed 19.3 m/s and its front bumper is a distance 23.9 m behind the truck's rear bumper. The car begins accelerating at a constant...

http://woodtv.triton.net/news/phoner/Wheelchair%20911multiple.mp3- 911 calls http://www.woodtv.com/Global/story.asp?S=6623359&nav=0Rce

A truck driver, it is said, once explained that when he was crossing a bridge and was overweight with birds; he just rapped on the truck and got the birds flying, so the truck was lighter! Of course, it was explained on MythBusters that Newton's Third Law does not work that way; and by...

Homework Statement The coefficient of limiting static friction of a rubber tire in wet concrete is 0.70. What mass of tractor, with its brakes locked, can be dragged by a tow truck that can exert a horizontal force of 1.0 * 10^4 N? Homework Equations Fnetx = ma Ff = us*Fn Fn = m*g...

Homework Statement Losing Cargo. A box of mass m rests on the flat floor of a truck. The coefficients of friction between the box and floor are "us" and "uk". The truck stops at a stop sign and then starts to move with an acceleration of a. If the box is a distance x from the rear of the...

Homework Statement A 1.2*10power of 4 kg truck is traveling South as 22m/s A)what net force is required to bring the truck to a stop in 330m B)what is the cause of this net force Homework Equations Fnet=ma The Attempt at a Solution m=1.2*10power of 4 kg Fnet=ma = 1.2*10power...

a runaway truck with failed brakes is moving downgrade at 150km/h (41.6 m/s) just before the driver steers the truck travel up a frictionless emergency escape ramp with an inclination of 15°. The truck's mass is 5000 kg. What minimum length L must the ramp have if the truck is to stop...

When the driver applies the brakes of a light truck traveling at 40\,\frac{km}{hr}, it skids 3 m before stopping. How far will the truck skid if it is traveling 80\,\frac{km}{hr} when the brakes are applied? Here is what I have done, we are supposed to use the work energy formula, but I can't...

Ok, I think I might have missed a key point in this class from a few weeks ago but anyways. There is a truck of mass M, who has a constant force F applied to it. The truck is also being filled with coal at a constant rate b kg/s. I'm supposed to find an expression for the velocity of the...

hi to all problem: a truck with a total weight of 5000kN and with 4 wheels will be placed on 4 glass cups each under one wheel. if each tire has a internal air pressure of 2MPa. what will be the load on each cup? and if the truck was standing on the road without the cups under wheels what...

Hi Saw this in a Science Centre - There truck on an inclined slope. At the head of the truck is a magnet. the end of the track is a wire with electric current (DC i think). As the truck is released, the wire moves a little away from the truck. The truck gets near the wire but not touching...

A simple pendulum is 8.00 meters long.(a) What is the period of simple harmonic motion for the pendulum if it is place in a truck that is accelerating horizontally at 2.00 m/s^2There were 2 other questions with accelerating upward and downward in an elevator, and those numbers I either added or...

The NSA is spending $50 billion per year on information gathering and they apparently missed this. The FBI only stopped it recently. A truck driving school in Missouri, a school run by the public school system no less, was giving training and helping to provide commercial drivers licenses...

A truck carrying chickens is too heavy for a bridge that it needs to cross. The empty truck is within the weight limits; with the chickens it is overweight. It is suggested that if one could get the chickens to fly around in the truck by banging on the truck side, it would be safe to cross the...

if a truck covers 41.7 meters in 6.2 seconds awhile slowing down slowly to final speed of 3.5 m/s.whats its oringal speed?

Can I get some help on this problem? A truck with mass m has a brake failure while going down an icy mountain road of constant downward slope angle theta. Initially the truck is moving downhill at speed Vnot. After careening downhill a distance L (hypotenuse) with negligible friction, the...

Losing Cargo. A box of mass rests on the flat floor of a truck. The coefficients of friction between the box and floor are and . The truck stops at a stop sign and then starts to move with an acceleration of a a) if the box is a distance x from the rear of truck starts, how much time...

The other day I was driving down the highway behind a Fertilizer Truck. It had a huge plastic reservoir of liquid fertilizer on the back, essentially a large cylinder lying on its side. The reservoir was not full and it was partially translucent, so I could see the fertilizer sloshing around in...

A crate of oranges weighing 180N rests on a flatbet truck 2.0m from the back of the truck. The coefficients of friction between the crate and the bed are us=0.30 and uk=0.20. The truck drives on a straight, level highway at a constant 8.0 m/s. (a) What is the force of friction acting on the...

"At the instant the traffic light turns green, an automobile starts with a constant acceleration a of 2.2 m/s^2. At the same instant a truck, traveling with a constant speed of 9.5 m/s, overtakes and passes the automobile. (a). How far beyond the traffic signal will the automobile overtake...

I'm having a real problem trying to work out this question: A crate of eggs is located in the middle of the flatbed of a pickup truck. The truck is negotiating a curve in the road that may be considered as an arc of a circle of radius 35 m. if the coefficient of static friction between the...

I may be lazy looker but this seemed like the best forum for this question. i just hope there are car people here. i have a 1993 GMC sierra V6 truck (dark blue, in case you were wondering). On the "shifter" i have the option to drive in "drive" or "overdrive." Now i don't really...

Truck brakes can fail if they get too hot. In some mountainous areas, ramps of loose gravel are constructed to stop runaway trucks that have lost their brakes. The combination of a slight upward slope and a large coefficient of friction in the gravel brings the truck safely to a halt. Suppose a...

a car starts from rest at a point 300m from a truch that is moving at a constant rate of 30m/s toward the car. IF the car accelerates at .8m/s2, determine the time it take for the car and the truck to meet. s=300 This is what I did Car: Vi = 0, a = .8 Vf^2=2as = Vf=21.9 Vf=at 21.9/.8...

Does anyone know of or know of the feasability of making like a cheap, gas or electric operated machine that you can bring up to a truck, load a bunch fo stuff on it (just a few boards with maybe locking sides for loose stuff) and drive it up a ramp or something :D It seems like around my house...

I have been bothered with a problem that I know should not be monopolizing as much time as it has. It just annoys me how I keep missing the little thing that would make the problem more understandable. Anyways, here is the problem, with my attempt of a solution: a tow truck pulls on a car...

2. A spring from the truck is found not to conform to Hooke’s law. The force law for this spring is found to be: F = – k1x – k2 x^2 where k1 = 52.8 N.m-1; k2 = 38.4 N.m-2. a) Compute the work required to stretch the spring from x = 0.500 m to x = 1.00 m. b) With one end of the spring fixed...

Absolutely a true story: It happened at a customer's site last night and I was there today. I will post a picture when I get a copy tomorrow. This customer receives bulk materials from tractor-trailers by lifting the entire trailer, dump truck fashion, to an angle of sixty degrees. The...

okay, my truck is in the shop today. I need some food delivered. somebody call and have some food sent over please.

A refrigerator is approximately a uniform parallelepiped h = 7 ft tall, w = 3 ft wide, and d = 2 ft deep. It sits upright on a truck with its 3 ft dimension in the direction of travel. Assume that the refrigerator cannot slide on the truck and that its mass is 100 kg. For the first three parts...

What varibles might be need to find the force necessary to pull a car on to a tow truck at an angle?

Calculate the power of a truch that travels at a constant speed of 100km/h up a hill if the engin exerts a force of 2500N on the truck. Can anyone help me on this question?

I tried many ways to perfomr this problem, but i just can't figure out whether or not I am using the right values. "A 25 ton truck loses it brakes and reaches the bottom of a hill with a speed of 60 mph. Fortunately, there is a runaway truck ramp which is inclined at angle of 15 degrees to...

I tried many ways to perfomr this problem, but i just can't figure out whether or not I am using the right values. "A 25 ton truck loses it brakes and reaches the bottom of a hill with a speed of 60 mph. Fortunately, there is a runaway truck ramp which is inclined at angle of 15 degrees to...

2 thou dollars! HELP HOW TO MOVE a truck i need on help on how to move a truck of 25-30 tons by just human force. its a competition and the scores are based on a balance of time, people used (the less the better) and creativity of the system. there are 3 trucks and we have to move each 10...

Hello, I'm having some difficulty in a physics question. The question is: To save fuel, some truck drivers try to maintain a constant speed when possible. A truck traveling at 81.0 km/h approaches a car stopped at the red light. When the truck is 94.6 meters from the car the light turns...

I'm not really good at physics so relevant any feedback would be helpful. Here's the question; At the instant a traffic light turns green, a car starts with a constant velocity of 6.0 ft/s. At the same instant a truck, traveling with a constant speed of 34 ft/s, overtakes and passes the car...

A trucker needs to weigh a truck that is too long to fit on a platform scale. When the front wheels of the truck are run onto the scale, the scale reads W_1 . When the rear wheels are run onto the scale so that the front wheels are off, it reads W_2 . a) prove that the total wight of the...