A-Level Sensor Coursework: Measuring Sensitivity with Basic Equipment

  • Thread starter Thread starter SirAethelred
  • Start date Start date
  • Tags Tags
    Coursework Sensor
AI Thread Summary
The discussion focuses on A-Level coursework related to measuring the sensitivity of sensors using basic equipment like resistors, wires, bulbs, and capacitors. The primary suggestion is to use the Wheatstone Bridge for measuring resistance, which is considered a suitable and straightforward method. Participants agree that the Wheatstone Bridge is a viable option and encourage proceeding with it. The conversation emphasizes the need for simplicity in theory, avoiding complex calculus. Overall, the Wheatstone Bridge is endorsed as an effective choice for the coursework.
SirAethelred
Messages
8
Reaction score
0
I am currently doing my A levels at school and my next peace of coursework is on sensors and mesuring their sensitivity. it has to be something that can be done with fairly basic equipment (so just resistors, wires, bulbs, capacitors) normal high school stuff and with a fairly easy theory to learn. I am not at Uni by the way so hold back on the calculus if you can.
any ideas would really help. the best one i have have come up with is the Wheatstone Bridge mesuring resistance.
any suggestions?

cheers for you help
 
Physics news on Phys.org
Why not go with the Wheatstone bridge then?
 
I am intending to but i just thought a website full of brilliant physicists might have a diffrent pespective on things but if you think it is a good idea I am happy to go ahead with it.
 
I think it's A-OK.
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Correct statement about a reservoir with an outlet pipe'

Thread 'Correct statement about a reservoir with an outlet pipe'

The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
View full post »

Similar threads

I Recreating Spectral Response from 6-Channel Color Sensor
Replies
6
Views
3K
Advanced Project - Wheatstone Bridge for TCR measurements
Replies
2
Views
2K
How Can Wind Tunnel Data Collection Enhance Your A2 Physics Coursework?
Replies
1
Views
2K
What Should Be Included in AS-Level Physics Sensor Coursework?
Replies
1
Views
3K
Resistance of a brick - Old coursework question
Replies
4
Views
4K
How to determine the range of sensitivity for a camera sensor?
Replies
1
Views
2K
Physics Coursework: Sensors, Photodiodes and Graphs
Replies
32
Views
8K
Wheatstone bridge with capacitances
Replies
8
Views
4K
B Scale of Measurement vs Equipment Sensitivity: Does Symmetry Always Hold?
Replies
4
Views
1K
EEE Student Seeks Help for Strain Sensing Project
Replies
6
Views
3K

Hot Threads

Recent Insights

Back
Top