AC generator calculation question

AI Thread Summary
To calculate the emf induced in a coil with dimensions 0.4m by 0.3m, 50 turns, and a flux density of 96.8 mT, the relevant equation is EMF = v l B N sinθ. The velocity v is calculated as 47.13 m/s, leading to an emf of 45.62 V when substituting into the equation. The calculation assumes the coil is rotated 30 degrees from the vertical, with the long sides facing the magnets. The method appears correct based on the provided parameters. The final emf value is confirmed unless there is an error in the initial setup.
Th3_PhYsIcS
Messages
4
Reaction score
0
1. Calculate the emf induced in ONE side of a coil of length 0.4m and width 0.3m, when there are 50 turns in the coil and the flux density is 96.8 mT, and the coil is rotated 30 degrees from the vertical. Frequency is 50 Hz and the long sides are the ones facing the magnets.
 
Physics news on Phys.org
Relevant equations? Your attempt? Please follow the template.
 
2. Relevant equation(s): EMF = v l B N sinθ

3. My attempt: v = 2 ∏ (0.3/2) * 50 = 47.13 ms-1 ∴ emf = 47.13(0.4)(96.8 * 10^-3)(50)(sin30) = 45.62 V
 
is ^ my method correct. Sorry i am new to these forums
 
Can't find anything wrong, so unless the picture we have of the situation is wrong, that's the emf !
 
Thread 'Help with Time-Independent Perturbation Theory "Good" States Proof'
(Disclaimer: this is not a HW question. I am self-studying, and this felt like the type of question I've seen in this forum. If there is somewhere better for me to share this doubt, please let me know and I'll transfer it right away.) I am currently reviewing Chapter 7 of Introduction to QM by Griffiths. I have been stuck for an hour or so trying to understand the last paragraph of this proof (pls check the attached file). It claims that we can express Ψ_{γ}(0) as a linear combination of...
Back
Top