Calculating Amplitude of a Harmonic Motion System with Added Mass

AI Thread Summary
The problem involves a 4.00 kg mass attached to a spring with a force constant of 100 N/m, oscillating with an initial amplitude of 2.00 m. When a 6.00 kg object is dropped onto it at the equilibrium point, the system's total mass increases to 10.00 kg. The angular frequency changes from 5 s^-1 to 3.16 s^-1 after the collision. The new amplitude is calculated to be 2.00 m, which seems incorrect as it does not account for the added mass. The correct approach involves applying conservation of momentum during the collision to determine the new amplitude.
Zynoakib
Messages
70
Reaction score
0

Homework Statement


A particle of mass 4.00 kg is attached to a
spring with a force constant of 100 N/m. It is oscillating
on a frictionless, horizontal surface with an amplitude
of 2.00 m. A 6.00-kg object is dropped vertically on top
of the 4.00-kg object as it passes through its equilibrium
point. The two objects stick together. What
is the new amplitude of the vibrating system after the
collision?

Homework Equations

The Attempt at a Solution


Angular frequency before impact adding the block = (100/ 4)^1/2 = 5 s^-1

Angular frequency after impact adding the block = (100/ 10)^1/2 = 3.16 s^-1

Max acceleration before adding the block = Angular frequency^2 x amplitude = 25 x 2 = 50 ms^-2

Force of max acceleration = 50 x 4 = 200N

After addition of the block, the max acceleration will be 200N/ (6 + 4) = 20 ms^-2

Max acceleration after adding the block = Angular frequency^2 x amplitude
20 = 3.16^2 x amplitude
amplitude = 2

I know it is wrong but what is wrong, other than the fact my answer is exactly the same as the old amplitude.
 
Physics news on Phys.org
Did you do anything with the 'collision' when adding the 6 kg object ?
 
  • Like
Likes Zynoakib
thanks. I have got the answer!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top