Calculating Final Speed & Angle of a Rocket Motion

AI Thread Summary
The discussion focuses on calculating the final speed and angle of a rocket that turns on its engine to eject gas perpendicularly while traveling at 20 km/s in a non-gravity environment. The rocket's mass decreases by 25% during the engine's operation, affecting its momentum and resulting in a change in velocity. The final velocity components are determined using momentum conservation equations, leading to a final speed in the x-direction of approximately 19.2 km/s and a y-direction speed of about 0.86 km/s. The angle of the rocket's change in direction is calculated to be between 0 and 2.6 degrees, with the gas ejection assumed to be perpendicular to the initial motion. This analysis highlights the importance of considering both velocity components and their relationship to the rocket's orientation.
tamref
Messages
5
Reaction score
0

Homework Statement



A rocket is traveling with a speed 20 km/s in a non-gravity space. To fix the direction of motion, it turns on an engine, which pushes the gasses with constant speed 3 km/s w.r.t. the rocket perpendicularly to the direction of its motion. The engine is on till the mass of the rocket declines for 1/4 of the initial.

For what angle has the rocket changed the direction of motion and what is its final speed?


Homework Equations



x-axis: d( p(rocket) ) = - d( m(gasses) ) v(gasses) cos( alpha+d(alpha) )

dm/dt * v(rocket_final) + dv/dt m( rocket_new )= - dm/dt * v(gasses) (cos(alpha)cos(d(alpha)) - sin(alpha)sin(d(alpha)) )

dm/dt * v(rocket_final) + dv/dt ( m- dm/dt *t) = - dm/dt * v(gasses) *cos(alpha)cos(d(alpha))



The Attempt at a Solution



I tried to express the change in momentum of the rocket w.r.t. the angle of motion like above for both x- and y- axis, but I get unknown velocity and angle.
 
Physics news on Phys.org
Taking the direction of motion of the rocket to be the x-axis, write the momentum conservation equation in the y direction. This will give you the final velocity of the rocket in the y direction.

Now, you know both the x and y components of the final velocity, and you can calculate the angle that the velocity makes with the x-axis using trigonometry. (Hint: Draw a picture. What is tan(θ) in terms of Vx and Vy?)
 
Thank you, dx.

But the problem I see is, that the direction of gasses also changes with moving rocket. Therefore also Vx changes. The whole momentum does not go into Vy.
 
The direction of motion changes, but the orientation of the rocket stays the same. So the direction in which the gas is ejected is the same.
 
What refers orientation of the rocket to, dx?

I thought of this problem again and maybe this is a solution.

Let us say, that the rocket would push the gasses with a given Vr=3 km/s in front of itself. Then its final Vx would be 19,2 km/s.

On the other hand, if the rocket would push the gasses with a given Vr perpendicularly to the initial direction of motion, its final Vy would be 0,86 km/s.

Therefore in any case 0<Vy<0,86 and 19,2<Vx<20. Therefore the angle for which it turns is
0< theta < 2,6 degrees.


Using the fact about the angle, we can see, that the change in Vx in x-axis can be neglected, since sin(2,6)~0,045. Also since cos(2,6)~0,998, we can take V=Vr for the relative velocity of gasses in y-axis during turning.

Therefore we can really assume that the gasses are ejected perpendicularly to the initial direction of rocket's motion.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top