Calculating Power Use on a Hill with Air Resistance and Friction

  • Thread starter Thread starter Simonpe
  • Start date Start date
  • Tags Tags
    Strange
AI Thread Summary
The discussion revolves around calculating the power required for a person to ascend an 8-degree hill at a speed of 12 km/h, with a total mass of 75 kg and considering air resistance and friction at 5% of mg. The initial calculation yielded an incorrect power output of 120W, while the expected answer is 0.46kW. Participants suggest using the "force" method for the calculation, emphasizing that both energy and force methods should yield the same result. The original poster expresses anxiety about the problem but feels reassured after receiving guidance. The conversation highlights the importance of method selection in physics problems.
Simonpe
Messages
3
Reaction score
0
Hi!

I have a big problem with this simple question. I can manage all the other questions on the paper i got except this one, and it's even one of the easier in there. So please gimme suggestions of what formulas to use:

A person is struggeling his way up a 8 degree hill with the velocity of 12km/h. Calculate the power use. The total mass of him and his bicycle is 75kg. Air resistance and friction is 5,0% of mg.

I tried calculating it with both force laws and energy laws and i end up with the answer 120W (or something i can't remember) but the correct answer should be 0,46kW

Please excuse my bad english, and thanks for the help!

Simon
 
Physics news on Phys.org
Welcome to PF!

Show us how you got your answer and we'll give you a hand.
 
Thanks!

Unfortunately I've erased the first soultion and I've only got a lot of unreadable panic notes left :P but can u at least tell me what path to use, Energy or Force? Then i think i'll be able to solve it.

Thanks in advance!
 
Both methods should agree. Go ahead and use the "force" method. :smile:
 
I think i'll manage it now, after hours of studying. Got a test tomorrow morning and i got a little scared that i couldn't accomplish a simple task like that. Btw i used the energy method but thanks for the advice :D

take care and good night
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »

Similar threads

Sledding Down a Hill: Calculating Friction and Velocity
Replies
31
Views
3K
What is the deceleration of a snowboarder going up a 5.0° slope?
Replies
2
Views
13K
Find mechanical energy lost when a cyclist goes down a hill
Replies
3
Views
2K
How to calculate the wind force acting on a water drop?
Replies
39
Views
3K
For the friction formula when to use Fn(normal force)×mu and when F×mu
Replies
17
Views
2K
Incandescent Bulb - suitable approximation for voltage-current curve
Replies
2
Views
978
Cyclist coasting down a hill cons. of energy
Replies
4
Views
3K
Force, speed of truck on a 10.0 degree hill
Replies
4
Views
1K
How Long Does It Take a Car to Climb a Hill with Limited Power?
Replies
2
Views
5K
Calculating the Power Needed to Bike Up a Hill
Replies
3
Views
2K

Hot Threads

Recent Insights

Back
Top