Can You Solve These Physics Problems on Constant Acceleration?

  • Thread starter Thread starter Meteo
  • Start date Start date
  • Tags Tags
    Couple
AI Thread Summary
The discussion focuses on solving two physics problems involving constant acceleration. In the first problem, a Porsche and a Honda race, with the Porsche winning after calculations show it takes about 15.14 seconds compared to the Honda's 15.33 seconds. The second problem involves a weather rocket launched with constant acceleration for 16 seconds, followed by free fall, with participants discussing how to calculate the rocket's acceleration and velocity at a height of 5100 meters. Key equations for motion are utilized, and participants clarify the importance of variables and how to approach the problem. The conversation emphasizes the application of kinematic equations to solve real-world scenarios effectively.
Meteo
Messages
12
Reaction score
0
Right now I've only learned 3 equations dealing with constant accleration
<br /> v_f=v_i+a_s\Delta t<br />
<br /> s_f=s_i+v_i\Delta t+1/2a_s(\Delta t)^2
<br /> v_f^2=v_i^2+2a_s\Delta s<br />

Ok first problem:

A Porsche challenges a Honda to a 400-m race. Because the Porsche's acceleration of 3.5m/s^2 is larger than the Honda's 3.0m/s^2, the Honda gets a 50-m head start. Both cars start accelerating at the same instant.


Who wins?

I used the 3rd equation to get 2800 and then sqrt 2800 to get Vf=53. Then I used the 1st equation to get delta t. Which I got to be about 15.14 sec. For the Honda I did the same thing and got 15.33 sec. So the Porsche wins. I was wondering. Did I do this right?


The second question...
A 1000kg weather rocket is launched straight up. The rocket motor provides a constant acceleration for 16s, then the motor stops. The rocket altitude 20s after launch is 5100m. You can ignore any effects of air resistance.

This one completely stumped me. Cause no matter which equation I use, I get at least 2 variables... and is the 1000kg even important?
 
Physics news on Phys.org
For the first one, you can use the second equation.
I'll indicate p for the posrche and h for the honda.

s_p=\frac{3.5 \cdot (\Delta t)^2}{2}

s_h= 50 + \frac{3.0 \cdot (\Delta t)^2}{2}

Now you could subsitute their final positions being 400m and see which ones needs the least time.

What is the question for problem 2?
 
For problem2.

The rocket lifts off with a high acceleration (I got about 27 m/s²) for the first 16s reaching a velocity of v1. It then travels under gravity effects only for the next 4s reaching a velocity of v2 (v2 =/= 0).

You have,

v0 = 0 at t = 0 and s = 0
v1 = v1 at t = 16 and s = s1
v2 = v2 at t = 20 and s = s1 + s2

where s2 is the distance traveled under gravity effects only.

You can now use your eqns of motion to eliminate v1 (or v2) and the unknown initial accceleration and using the fact that s1 + s2 = 5100m.

I don't know what the question is supposed to be for this question, but knowing v1 and v2, you should now be able to answer it.

Edit: I don't see where the mass is needed for this Q.
 
Last edited:
s instead of x? him I've never seen that variable change on those motion equations.
 
The questions for problem 2 were find the acceleration of the rocket, then find the velocity as it passes 5100m.

I labeled
v0=t0=y0=0
y2=5100
t1=16 t2=20

Using the equations I got
V1=16a
Y1=128a

I then used the 2nd equation
5100=128a+16a(4)+1/2(-9.8)4^2
I get a=26.9 :smile:

I don't know where to go from here.
Im not sure how to use s1 + s2 = 5100m.
 
Last edited:
Meteo said:
...

I get a=26.9 :smile:

I don't know where to go from here.
Im not sure how to use s1 + s2 = 5100m.
You don't have to go very far from here now.

You've already used s1 and s2, in effect.

s1 = ½a(16)²
s2 = v1(20-16) - g(20 - 16)²
s1 + s2 = ½a(256) + 4v1 - g*4²
5100 =128a + 4(16a) - g*4² since v1 = at1 = 16a

To get the velocity at 5100,

vf = vi - gt

This is the eqn of motion in free fall, under gravity effects only, where vf is the velocity at 5100, vi is the initial velocity (= v1) at the start of its travel under free fall and t is the time taken, during free fall, to reach the height of 5100.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top