Centripedal acceleration question

AI Thread Summary
A BMX rider's maximum speed over a bump of radius R is determined by centripetal acceleration, which is equal to gravitational acceleration (g) at the top of the bump. The correct formula for maximum speed is v = √(gR), as derived from equating centripetal force to gravitational force. At the peak of the bump, the normal force is at its maximum, allowing gravity to provide the necessary centripetal force. If the rider exceeds this speed, the normal force becomes zero, and the bike will leave the ground. Understanding the relationship between centripetal force and gravitational force is crucial for determining safe speeds on such obstacles.
dragon513
Messages
26
Reaction score
0
Q. A BMX rider is about to ride over a large bump of radius R. What is the maximum speed the rider can travel without leaving the ground?

Choice
A. g/R
B. gR
C. (gR)^0.5
D. It depends on the mass of the rider

The answer provided is C, but howcome g, gravity, is the centripedal acceleration?

I was able to obtain the answer C by using this (V^2)/R = g = centripedal accel (C.A.).

However, shouldn't the direction of the C.A. be perpendicular to the direction the rider is moving to?

g is in fact the C.A. at the top of the large bump, but when the rider is going up or coming down, I don't think g is the C.A.

Am I not correct?

Thank you and Happy New Year!
 
Physics news on Phys.org
Well, the centripital FORCE must equal the normal force of the rider, or he'll go flying off the bump, right? We care about the MAXIMUM velocity, which means we have to look at the case of highest normal force. Well that force is at a maximum when the biker is on the very top of the bump (when all of the force of the rider is normal to the bump). So, at that point, F_{normal}=m_{rider}g, and that must equal centripital force.
m_{rider}g=m_{rider}\frac{v^2}{r}

The masses cancel as they always do in cases similar to this, and simple algebra yields v=\sqrt{gr}

Make sense?
 
scholzie said:
Well, the centripital FORCE must equal the normal force of the rider, or he'll go flying off the bump, right? We care about the MAXIMUM velocity, which means we have to look at the case of highest normal force. Well that force is at a maximum when the biker is on the very top of the bump (when all of the force of the rider is normal to the bump). So, at that point, F_{normal}=m_{rider}g, and that must equal centripital force.
m_{rider}g=m_{rider}\frac{v^2}{r}

The masses cancel as they always do in cases similar to this, and simple algebra yields v=\sqrt{gr}

Make sense?

I got it now! Thank you!
 
Right answer, wrong reason.

Centripetal force is not a type of force itself, but a description of the direction of a force. Some "real" force must supply the required centripetal force in order to change direction at the proper rate.

When undergoing perfect circular motion, the centripetal force is the only unbalanced force on the object going in a circle. Therefore the centripetal force is also the net force.

In the case of the motercylce going over a bump, the maximum speed that he can attain is that which causes the normal force at the top of the bump to just become zero. When the normal force is zero at the top of the bump, the total force on the guy is due to gravity alone. This is why the centripetal force is set equal to the guy's weight. Any faster, and gravity could not supply a force great enough to maintain the circular path of the bump, and the bike will leave the ground.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...

Similar threads

Back
Top