Designing Rack and Pinion Gears: How Do I Calculate the Required Parameters?

  • Thread starter Thread starter Reddy
  • Start date Start date
  • Tags Tags
    Calculation
AI Thread Summary
The discussion focuses on designing rack and pinion gears, with specific parameters such as a steering ratio of 9.23 and a front load of 1500N. The user calculated the torque on the pinion as 9Nm based on various factors, including tyre pressure and friction. They seek assistance in determining the module, teeth selection for the pinion, and calculations for linear force and speed. The urgency is emphasized due to an approaching deadline for report submission. Overall, the user is looking for guidance on the necessary calculations and design parameters for their project.
Reddy
Messages
7
Reaction score
0
Hii,
Can anyone help me in designing rack and pinion gears and their formulae...steering ratio of my steering=9.23 ,the load that on front =1500N...I.e.,load to move by pinion ,torque on pinion is 9Nm...that torque was caluclated based on tyre pressure ,friction between tyres,front axle max load,i.e., T=(2*co-efficient of friction*Wf^1.5)/(√(π*p))...was that correct??...c factor =2.19 in . (c factor = 2*module*Zp(pinion teeth)) ...pls help in module finding,teeth selection on pinion,pitch,i heard linear force,speed of pinion ,linear speed of rack...((angular velocity of pinion/linear velocity of rack)=1/radius of pinion) are all required for designing ryt...i don't know how to caluclate linear force those and all...please help ...I m almost in deadline...hope someone will lift me... Tq :)
 
Engineering news on Phys.org
I have to submit my reports by end of this month...nd I have started new thread with the values I have..
Help me to step forward
 

Thread 'A practical way to vaporize fuel for high MPG?'

Here's a video by “driving 4 answers” who seems to me to be well versed on the details of Internal Combustion engines. The video does cover something that's a bit shrouded in 'conspiracy theory', and he touches on that, but of course for phys.org, I'm only interested in the actual science involved. He analyzes the claim of achieving 100 mpg with a 427 cubic inch V8 1970 Ford Galaxy in 1977. Only the fuel supply system was modified. I was surprised that he feels the claim could have been...
View full post »

Thread 'Technical Analysis on Titan Sub (Titanic Sub)'

TL;DR Summary: Heard in the news about using sonar to locate the sub Hello : After the sinking of the ship near the Greek shores , carrying of alot of people , there was another accident that include 5 tourists and a submarine visiting the titanic , which went missing Some technical notes captured my attention, that there us few sonar devices are hearing sounds repeated every 30 seconds , but they are not able to locate the source Is it possible that the sound waves are reflecting from...
View full post »
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Similar threads

Rack and Pinion motor selection
Replies
3
Views
2K
Calculate Distance of Rack & Pinion Gears
Replies
2
Views
15K
How can I design a gear train to meet specific torque and RPM requirements?
Replies
2
Views
2K
Designing Double Reduction Gear Drive: Input RPM 730, Output RPM 85.7
Replies
7
Views
6K
Gear Wear Rig Design: Calculating Load for Maximum Durability
Replies
6
Views
2K
How to Calculate Input Power for a Gear Train with Frictional Resistance?
Replies
4
Views
3K
How Do I Calculate the Shaft Diameter Based on Gear Forces and Moments?
Replies
2
Views
5K
How Do Rack and Pinion Gears Translate Motion in Physics?
Replies
4
Views
3K
How Do You Calculate Gear Train Efficiency Based on Load Torque?
Replies
13
Views
7K
How Do You Calculate Spring Properties for Effective Landing Gear Design?
Replies
10
Views
2K

Hot Threads

Recent Insights

Back
Top