Determining charge from electric potential

AI Thread Summary
The discussion focuses on calculating the charge q on a metal sphere and a hollow spherical shell given a potential difference of 500 V. The equation used is ΔV=q/K [(1/ra)-(1/rb)], but the initial calculation yielded an unreasonably large value for q. A participant pointed out a potential error in the placement of the constant K in the equation. The correct value of K is 1/4∏ε0, which was overlooked in the initial attempt. This correction is crucial for accurately determining the charge.
rmcgovern
Messages
8
Reaction score
0

Homework Statement


A metal sphere with radius ra = 1.20 cm is supported on an insulating stand at the center of a hollow, metal, spherical shell with radius rb = 9.00 cm. Charge +q is put on the inner sphere and charge -q on the outer spherical shell. The magnitude of q is chosen to make the potential difference between the spheres 500 V, with the inner sphere at higher potential. Calculate q.


Homework Equations



ΔV=q/K [(1/ra)-(1/rb)]


The Attempt at a Solution



Solving for q from the eqn above I have reached q= ΔV/[(1/ra)-(1/rb)] * K. By simply plugging in the numbers given I reached a soln of q= 6.23*10^10 C. This answer seemed far too large to be right, and indeed it is not correct. Is this the proper equation to use in this situation? I double checked the math and it appears everything is right, does anyone see where I may have gone wrong? Any help is greatly appreciated.
 
Physics news on Phys.org
rmcgovern said:
ΔV=q/K [(1/ra)-(1/rb)]

Hi rmcgovern. Welcome to PF!

Did you put the constant K in the correct location in your equation for ΔV?
 
ah! I forgot that K=1/4∏ε0. a rather trivial error. thank you for your help.
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top