Dispersion by diffraction grating

AI Thread Summary
The discussion revolves around calculating the width of the first-order spectrum produced by a diffraction grating when white light passes through it. The relevant equation used is y = m * L * wavelength / d, where d is the grating spacing derived from the number of lines per cm. The user initially calculated the spectrum width as 56.486 cm, but faced inconsistencies in their results. After some back-and-forth, they confirmed that using the equation correctly yields a similar answer of 56.502 cm. The conversation emphasizes the importance of unit consistency and verifying the application of the diffraction equation.
Liketothink
Messages
68
Reaction score
0

Homework Statement



White light containing wavelengths from 396 nm to 756 nm falls on a grating with 7300 lines/cm. How wide is the first-order spectrum on a screen 2.15 m away?

Homework Equations


y=m*L*wavelenth/(d)


The Attempt at a Solution


using the equation I have found y1 to be 62.149 and y2 118.635. I took the difference of the two which gave me 56.486 cm, but that is wrong for some reason. Please help.
 
Physics news on Phys.org
Are you sure of that that's the equation for diffraction? Checking the units, it's quite inconsistent... Check the equation again...
 
That's the equation I'm used to. If we assume that the angle is small then sintheta=y/L
dsintheta=m*wavelength
d(y/L)=m*wavelength
m*wavelength*L/(d)=y ? I don't know what's wrong with the equation. For the units I converted everything to cm because 1/7300=d in cm.
 
Please help, I only have a couple of hours left.
 
I got 56.502 cm, using the equation. we seem to get the same answer.
 
Last edited:
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »

Similar threads

Number of bright fringes given by diffraction grating on a screen
Replies
6
Views
3K
Maxima in a diffraction grating
Replies
2
Views
3K
Diffraction Grating Question, Dispersion and Resolving
Replies
2
Views
4K
How Does a Diffraction Grating Resolve Different Wavelengths of Sodium Light?
Replies
10
Views
2K
Calculating the Number of Lines for a Diffraction Grating
Replies
3
Views
2K
Diffraction Grating wavelength
Replies
3
Views
2K
Calculating the Number of Lines on a Diffraction Grating
Replies
8
Views
27K
Diffraction Grating: Possible variables for Experiment
Replies
5
Views
2K
Light problem -- diffraction grating distance between adjacent bright fringes
Replies
5
Views
6K
Diffraction grating, distances between maxima
Replies
3
Views
5K

Hot Threads

Recent Insights

Back
Top