DIY Solar Cell Technology - Making it at Home Conditions

AI Thread Summary
DIY solar cell fabrication at home is complex and typically requires specialized equipment like vacuum ovens and dangerous gases, making it unsafe for most individuals. While creating solar cells from crystalline silicon at home is not practical, building a small-scale heliostat solar tower is a more feasible alternative. This method can be done safely with common sense, especially in areas with ample space and no nearby hazards. A well-designed heliostat could produce significant power, potentially around 1-2 kW with a 10m x 10m mirror area. Overall, pursuing heliostat technology is a safer and more accessible option for home solar energy projects.
Raivis
Messages
2
Reaction score
0
Hello!
I'm very interested in solar cell tehnology. I know that the main material used is crystalline silicon. Is it possible to buy all the materials that are necessary and to make the solar cell at home conditions? I hope that this process is not very complicated and laboratory isn't needed? What this process would include and is there some babyseps in doing it?
I'd be very happy for any kind of information!
Electronics is my hobby, maybe it can help me..

Wishing a nice day,
Raivis
 
Engineering news on Phys.org
Hmmm. Offhand, the silicon fabrication and doping processes that I'm familiar with take a fairly complicated oven and vacuum chamber setup, and use some darned dangerous gasses. There might be some other simpler processes by now for solar cell fabrication, though. Here is some basic background, with links to more info:

http://en.wikipedia.org/wiki/Solar_cell

Even if you buy wafers that have already been sawed from ingots, the doping steps still require the vacuum oven and the gasses. Probably not very safe for you or your neighbors. How about making a small-scale heliostat solar tower, and using thermal conversion instead?

http://en.wikipedia.org/wiki/Heliostat
 
Thank you very much!
Do you think I could make heliostat solar tover at home conditions?
 
Raivis said:
Thank you very much!
Do you think I could make heliostat solar tover at home conditions?

I think it's relatively practical, and with some common-sense, it could be reasonably safe. Emphasis on the common-sense part. If you live near an airport, and have a small yard with lots of close neighbors and flammable trees in the yard, then it probably would not be a good thing to experiment with, except maybe on a table-top scale (which will still teach you a lot of things). If planes and helicopters don't fly over your home, and you have a large back yard or property (preferably), then you should be able to make something maybe 10m x 10m, and produce something like a kW or two.

Quiz Question -- if you built a very efficient heliostat-based solar oven, with 10m x 10m of mirror area, what peak power would you be able to produce?
 
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
Thread 'How Does Jaguar's 1980s V12 Dual Coil Ignition System Enhance Spark Strength?'
I have come across a dual coil ignition system as used by Jaguar on their V12 in the 1980's. It uses two ignition coils with their primary windings wired in parallel. The primary coil has its secondary winding wired to the distributor and then to the spark plugs as is standard practice. However, the auxiliary coil has it secondary winding output sealed off. The purpose of the system was to provide a stronger spark to the plugs, always a difficult task with the very short dwell time of a...
Back
Top