Equations of motion and proper Significant Digits.

AI Thread Summary
The discussion focuses on solving equations of motion while adhering to the rules of significant figures. For the mass of gravel dumped from a truck, the calculated relative uncertainty is 0.275, which should be rounded to one significant figure, resulting in an answer of 0.3. In the second problem, the acceleration calculated as 1533 m/s² raises questions about proper rounding; the consensus suggests that the answer should be expressed as 1.53 X 10^3 m/s² for clarity. The participants emphasize the importance of maintaining significant figures throughout calculations to ensure accuracy. Proper application of significant figures is crucial in physics problem-solving.
JamesJames
Messages
204
Reaction score
0

Homework Statement



Solve the following to the proper number of significant figures:

a) A loaded truck has mass (2.12 X 10^4 +/- 6 X 10^2) kg and when empty, it has a mass of (1.72 X 10^4 +/- 5 X 10^2) kg. What is the relative uncertainty of the mass of the gravel dumped from the truck?

The Attempt at a Solution



Ok, so I go through the math and get

Relative Uncertainty = (5 X 10^2 + 6 X 10^2) kg / 4000 = 0.275

My qwuestion is in regards to significant digits. According to me, the # of sig. figs. Here is 1……there is 1 sig. fig. in 5 X 10^2 or 6 X 10^2, whichever you look at, so the answer should be rounded off to one significant figure.

This means that the FINAL answer should be 0.3.

b) v(initial) = 10.5 m/s
v(final) = -7.3 m/s
t = 0.0115 s

Calculate a.

The Attempt at a Solution



I used v(final ) = v(initial) + at and got a = 1533 m/s^2.

Should the correct answer (rounded off to proper number of significant figures) be a = 1.53 X 10^3 m/s^2?

What about 1533 m/s^2 or 1530 m/s^2….would either of these be acceptable OR is the only answer 1.53 X 10^3 m/s^2?
 
Physics news on Phys.org
Your help would be greatly appreciated. I feel like I am close but just need some help finishing off the problems.
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top