Find Force, Net Force, Acceleration & Final Speed

AI Thread Summary
The discussion focuses on solving a physics problem involving a box being pushed up a ramp with specific forces and angles. Key calculations include determining the force of friction, net force, acceleration, and final speed after a set time. The participant struggles with the correct value for the normal force (Fn) and frictional force (Ff), leading to incorrect subsequent calculations. Clarifications are made regarding the direction of forces and the correct interpretation of angles in the problem. Ultimately, the participant acknowledges the mistake in understanding the direction of the applied force and its impact on calculations.
shar_p
Messages
14
Reaction score
0

Homework Statement


I have a test on this tomorrow .. please help..
A box, initially at rest, is pushed up a ramp by a constant force acting 20 degrees above the ramp’s surface (pushing into the ramp from behind the box). The magnitude of the force is 50.0 N. The coefficient of friction is 0.30. The box has a mass of 5.0 kg and the ramp has an angle of 25 degrees. (a)Find the force of friction. (b)Find the net force. (c)Find the acceleration. (d)Find the final speed of the box after 6.0 s. Find how far up the ramp the box will travel in 6.0 s.


Homework Equations


2 different angles th1 and th2
Ff = ?, Fnet = ?
Calc Fn first then from Ff = (Mu)Fn, calc Ff, that would be (a)
Sum of Fx would be (b)
Using Sum of Fx = m. a we can get acc
using d = 1/2 a t ^ 2 (because vi = 0) we get d at 6 sec
using vf^2 = vi^2 + 2ad we can get vf
But I am not getting the correct value of Ff

The Attempt at a Solution


Sum of Fx = Fpx - Ff - Fgx = ma
Sum of Fy = Fn - Fpy - Fgy = 0
Fn = 50sin20 + 5 cos20 = 17.10
Ff = (0.3) Fn = 6.54 but the correct ans is 18 N and so everything else is going wrong.. pleaase help.
 
Physics news on Phys.org
Fn = 50sin20 + 5*9.8*cos25.
Now find Ff
 
shar_p said:
Sum of Fy = Fn - Fpy - Fgy = 0
You have the wrong sign for Fpy; it acts in the same direction as the normal force.
Fn = 50sin20 + 5 cos20 = 17.10
In addition, as rl.bhat described, your calculation of Fgy is incorrect.

Thus this value for Fn is wrong.
 
Thanks for the reply. rl.bhat thanks for catching my silly mistake. Glad this problem was not on the test. Though I don't agree with Doc Al that the sign -Fpy is wrong in
Sum of Fy = Fn - Fpy - Fgy = 0
because Fpy is downward because the Fp is pushed up the ramp and because of that Fn = Fpy+Fgy and with 50sin20 + 5*9.8*cos 25 I get the correct answer. Thanks
 
shar_p said:
Though I don't agree with Doc Al that the sign -Fpy is wrong in
Sum of Fy = Fn - Fpy - Fgy = 0
because Fpy is downward because the Fp is pushed up the ramp and because of that Fn = Fpy+Fgy and with 50sin20 + 5*9.8*cos 25 I get the correct answer.
I see what you mean now, but your problem statement said:
shar_p said:
A box, initially at rest, is pushed up a ramp by a constant force acting 20 degrees above the ramp’s surface (pushing into the ramp from behind the box).
I guess you meant that the force was pointing in a direction 20 degrees below the ramp surface. My bad. :redface:
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top