Finding height using Conservation of Energy

AI Thread Summary
The discussion focuses on calculating the height (H) from which a skier takes off horizontally after sliding down a ski jump. The skier's mass is 61 kg, and the height from which they start is 6.70 m, with a horizontal distance of 9.80 m. Initially, a velocity of 29.2 m/s was calculated, but this was later corrected to 8.38 m/s using the formula V = d * sqrt(g/2h). The conservation of energy principles were applied, with kinetic energy equating to gravitational potential energy to find the correct height. The final calculations confirmed that the correct height is significantly lower than initially thought.
Kajayacht
Messages
27
Reaction score
0

Homework Statement


A skier (m=61.00 kg) starts sliding down from the top of a ski jump with negligible friction and takes off horizontally. If h = 6.70 m and D = 9.80 m, find H.

I already found the velocity as he leaves the cliff to be 29.2 m/s

Here's a picture of it: http://img264.imageshack.us/my.php?image=prob21agz5.gif

Homework Equations


E[1] + W[non conservative] = E[2]
K= .5mv^2
U= mgh


The Attempt at a Solution



w[nc]= 0 (no friction)
K[1]= 0, U[2] = 0 so K[2] = U[1]

K[2]= .5*61*29.2^2
K[2]= 26005.52

26005.52 = mgH
26005.52/ (61*9.8) = H
H=43.5
 
Physics news on Phys.org
I already found the velocity as he leaves the cliff to be 29.2 m/s

Can you show how you got this? That's a pretty high speed.
 
You're right, and after reworking I found the speed to be 8.38 m/s which gave me the right answer
 
which I found using V= d* (square root of( g/2h))
 
That looks much better!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top