Finding the magnitude of impulse

  • Thread starter Thread starter oalanojr
  • Start date Start date
  • Tags Tags
    Impulse Magnitude
AI Thread Summary
To find the impulse required to increase a proton's speed from 0.991c to 0.994c, the impulse formula Impulse = m(V_f - V_i) is applied. The calculated values for the final and initial momentum yield an impulse of 1.53e-21. However, the discussion highlights the need to consider relativistic effects using the Lorentz transformation due to the velocities being close to the speed of light. The gamma factor, γ, is essential for accurate calculations in this context. The user acknowledges the oversight of not including the gamma factor in their initial calculations.
oalanojr
Messages
4
Reaction score
0

Homework Statement


A proton has mass 1.7×10−27 kg. What is the magnitude of the impulse required to increase its speed from 0.991c to 0.994c?


Homework Equations


Impulse = mV_f{}-mV_i{}


The Attempt at a Solution


Impulse = mV_f{}-mV_i{}
= 1.7e-27*(.994*3e8)-(1.7e-27*(.991*3e8))
= 5.0694e-19 -5.0541e-19
Impulse = 1.53e-21

I've triple checked my work and I still come up with the same wrong answer. Am I missing something here??
 
Physics news on Phys.org
You may need to use the Lorentz transformation since the velocities are near c.

\gamma = \frac{1}{\sqrt{1-\frac{v^2}{c^2}}}

You may need to check over that formula for me since I may have typed it in incorrectly.
 
oh i totally forgot about gamma portion of the equation! Thanks for the help!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top