Heat Engine Carnot Efficiency question

AI Thread Summary
A heat engine with a Carnot efficiency of 0.11 is tasked with performing 5.1 x 10^4 joules of work. The relationship between work (W), heat (Q), and internal energy (U) is crucial for solving the problem, as expressed in the equation ΔU = Q - W. The user initially struggles to understand how to calculate the internal energy and exhaust heat but later estimates internal energy at 412,636 joules, suggesting that exhaust heat is equivalent. Understanding thermal efficiency is key to relating Q and W to the engine's efficiency.
DrDonaldDuck
Messages
13
Reaction score
0

Homework Statement


A heat engine has a carnot efficiency of 0.11. How much internal energy does this engine use in order to do 5.1 x 10^4 joules of work? How much heat does this engine give off/exhaust?

Homework Equations


(change in)U=Q-W
W=(change in)E
 
Physics news on Phys.org
You need to post your attempt.

How does W and Q relate to the efficiency?
 
rock.freak667 said:
You need to post your attempt.

How does W and Q relate to the efficiency?

W is the work done and Q is the heat generated. U is the total internal energy. No idea how to do this, hence my non-existent attempt.
 
Still stumped and don't know how to attack problem!
 
Someone PLEASE help?!? Growing very desperate here.
EDIT:
I think I got it.
Internal energy=412636J, exhaust heat is the same. So sleepy, please confirm.
 
Last edited:
Look up 'thermal efficiency', that will tell you how Q and W are related to the efficiency n.

When you know that you can get the value of Q and subsquently U.
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »

Similar threads

Efficiency of Stirling Cycle - Is it the same as the Carnot Engine?
Replies
14
Views
1K
Engine working between multiple temperature baths worse than Carnot
Replies
1
Views
1K
Carnot engine efficiency problem
Replies
3
Views
4K
How Much Water Can a 1KW Carnot Engine Freeze in 5 Minutes?
Replies
3
Views
1K
Efficiency and Temperature in Heat Engine Cycles: Approaching Parts B, C, and D
Replies
1
Views
1K
Thermodynamics problem involving engine efficiency
Replies
20
Views
3K
Calculating work done by a Carnot engine
Replies
14
Views
9K
How to show that Carnot engine is more efficient?
Replies
1
Views
2K
Temperature in a Carnot heat engine
Replies
2
Views
3K
I calculating the heat exhausted from an engine.
Replies
1
Views
4K

Hot Threads

Recent Insights

Back
Top