How Do You Calculate Object Distance in Lens Equations?

  • Thread starter Thread starter sp1974
  • Start date Start date
AI Thread Summary
To calculate the object distance in lens equations, the formula used is 1/f = 1/di + 1/do. In the given problem, the focal length (f) is 56.0 mm and the image distance (di) is 68.0 mm behind the lens. The correct approach is to use di as a positive value, leading to the equation 1/56 = 1/68 + 1/do. The initial confusion arose from incorrectly adding the distances instead of properly applying the lens formula. Ultimately, the correct calculation reveals that the object distance (do) is determined by accurately solving the equation without mixing up the values.
sp1974
Messages
26
Reaction score
0
The homework problem is "A sharp image is located 68.0 mm behind a 56.0 mm focal length converging lens. Calculate the object distance in millimeters"



1/f = 1/di + 1/do



I tried solving based on having focal (f) and distance of image (di) so 1/56 mm = 1/(68 mm + 56 mm) + 1/do
I solved for do coming up with 102.04 mm and the computer doesn't accept
 
Last edited:
Physics news on Phys.org
Why is di=68+56?
 
I figured because the focal point was 56 and it says 68 behind it so I thought it would be f distance + the 68
 
It states it is behind a 56mm focal length lens. Not 68mm behind the focal length of a 56mm focal length lens.
 
I also did it as 1/56 = 1/68 + 1/do and the computer didnt accept that on as well
 
ok I figured this one out. I had my numbers flip flopped my numbers when subtracting
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »

Similar threads

Find the location and length of the final image
Replies
2
Views
915
GRIN Lens - Gradient Coefficient Expression
Replies
5
Views
950
Image position in an optical system?
Replies
5
Views
2K
Image with an Plano-Convex lens
Replies
7
Views
3K
Compound Microscope: Calculating Image Location with Two Lenses
Replies
4
Views
2K
Analyzing this 2-lens optical system
Replies
5
Views
1K
Imaging resolution for a microscope and eye
Replies
5
Views
2K
Focal length of the eyepiece lens in a compound microscope
Replies
7
Views
1K
Optics Problem with a Double Lens System
Replies
1
Views
2K
Calculate a radius of a circle on a screen
Replies
3
Views
1K

Hot Threads

Recent Insights

Back
Top