How Do You Calculate the Angular Momentum of a Rotating Bat?

AI Thread Summary
To calculate the angular momentum of a rotating bat, the moment of inertia must be correctly determined. The bat should be approximated as a long thin cylinder rather than a point mass at the end. The correct formula for moment of inertia is I = (1/3)mr^2 for a rod rotating about one end. Using this, the angular momentum can be calculated with L = Iω, where ω is the angular velocity. Properly applying these formulas leads to the correct solution for the problem.
Exustior
Messages
2
Reaction score
0

Homework Statement


A batter swings a 0.9 m long bat. Calculate the angular momentum of the bat relative to its axis of rotation. Assume the bat has a mass of 0.6 kg and rotates at 3 rad / s
(Hint: Approximate the bat by a rod, or a long thin cylinder, and find the moment of inertia.)
Answer in (N m)

Homework Equations


I=mr^2
ω=v/r
v=ωr
L=Iω

The Attempt at a Solution


L=Iω
I=mr^2
so L=(0.6)(.9^2)(ω)
ω=angular velocity is 3 rad/s
so L=(.6)(.9^2)(3rad/s)= Wrong answer
 
Last edited:
Physics news on Phys.org
Hey, welcome to physicsforums!
uh, the moment of inertia formula you have used is not correct for this problem. The inertia I=(0.6)(0.9)^2 would suggest the mass of the bat is concentrated at the end of the bat. But it looks like they want you to assume the bat is a long thin cylinder, of uniform density. So either you can look up the moment of inertia for this kind of object, or derive it yourself, if you have time.
 
BruceW said:
Hey, welcome to physicsforums!
uh, the moment of inertia formula you have used is not correct for this problem. The inertia I=(0.6)(0.9)^2 would suggest the mass of the bat is concentrated at the end of the bat. But it looks like they want you to assume the bat is a long thin cylinder, of uniform density. So either you can look up the moment of inertia for this kind of object, or derive it yourself, if you have time.
Thanks!
I got it I was using the wrong formula.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top