How Do You Calculate the Masses in a Two-Block System with a Tension of 18 N?

  • Thread starter Thread starter johnec22
  • Start date Start date
  • Tags Tags
    Law Newton's law
AI Thread Summary
In a two-block system with a tension of 18 N and a vertical force of 30 N, the smaller mass can be calculated using the formula T/(g+a), resulting in 1.4 kg for the lower block. The upper block's mass calculation initially yielded 2.3 kg, which contradicts the known relationship that the upper mass should be smaller than 1.4 kg. A participant suggested using Newton's Second Law directly for clarity, emphasizing the importance of correctly identifying the net forces acting on each block. The net force acting on the upper mass should consider both the applied force and the tension, while also accounting for gravitational effects. Ultimately, the correct approach simplifies the calculations and leads to the accurate determination of both masses.
johnec22
Messages
2
Reaction score
0

Homework Statement



Two masses are joined together by a massless, inextensible string. A vertical force of 30 N applied to the upper mass gives the system a constant upward acceleration of 3.2 m/s^2.

If the tension in the connecting string is 18 N, what is the smaller of two masses?

If the tension in the connecting string is 18 N, what is the bigger of two masses?

F= 30 T=18 m=1.4 a=3.2 g=9.8

Homework Equations



F(net) = m*a

The Attempt at a Solution

The lower block can be solved for by:
T/(g+a) = M which is 1.4kg

but I can't get the value of the upper block(which I know should be smaller then 1.4)

M=(F+T-ma-mg)/(a+g) F=30 T=18 m=1.4 a=3.2 g=9.8
when I do this M= 2.3 but it should be smaller then 1.4 because I know 1.4 is the larger block.
 
Physics news on Phys.org
Call the bottom mass m2. You know its acceleration is 3.2 m/s2. You also know that the tension acting on it is 18 N. Can you set up a Newton's Second Law equation for that mass alone in which m2 is the only unknown?
 
johnec22 said:
M=(F+T-ma-mg)/(a+g) F=30 T=18 m=1.4 a=3.2 g=9.8
when I do this M= 2.3 but it should be smaller then 1.4 because I know 1.4 is the larger block.
You messed up the forces in that equation. (And what's "ma" doing in there?) Just use Newton's 2nd law directly, rather than plug into a derived equation that may or may not apply. It's much simpler and you'll know it's right.

What's the net force on the upper mass?
 
Isn't the net force 48 because both the 30 N and the 18 N of tension are moving in an upward direction.

48 = M(3.2-9.8)?

*edit: never mind I found the solution.. Thanks so Much!"
 
johnec22 said:
Isn't the net force 48 because both the 30 N and the 18 N of tension are moving in an upward direction.
No:
(1) The 30 N and 18 N forces act in different directions.
(2) The weight of the mass contributes to the net force.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top