How Do You Solve a Combination Lens Problem in Optics?

  • Thread starter Thread starter Darth Frodo
  • Start date Start date
  • Tags Tags
    Combination Lens
AI Thread Summary
An object is placed 400 mm in front of a convex lens with a focal length of 80 mm, resulting in an image formed 100 mm to the right of the first lens. A second concave lens, positioned 80 mm behind the convex lens, requires the image from the first lens to act as the object for the second. The object distance for the concave lens is calculated as -20 mm, leading to the final image position being determined. The final image is found to be 100 mm from the concave lens, indicating it is virtual and located on the same side as the object.
Darth Frodo
Messages
211
Reaction score
1

Homework Statement



An object is placed 400 mm in front of a convex lens of focal length 80 mm. Find the position of the image formed. State the nature of this image.

A second concave lens of focal length 25 mm is placed 80 mm behind the first convex lens. Find the position of the final image formed and state its nature.

The Attempt at a Solution



\frac{1}{U} + \frac{1}{V} = \frac{1}{F}

\frac{1}{V} = \frac{1}{80} - \frac{1}{400}

V = 100 mm



So the Image from lens one forms 100 mm to the right of lens one. BUT, lens 2 is only 80 mm to the right of lens 1. I don't know what to do here since no image has been formed to create a new object for lens 2.

Any help?
 
Physics news on Phys.org
Which means the Object´s image will appear to the right (or behind) of the concave lense.
80-100= -20
U=-20 solve for V
 
\frac{1}{-20} + \frac{1}{V_{2}} = \frac{1}{F}

\frac{1}{V_{2}} = \frac{1}{20} - \frac{1}{25} = \frac{1}{100}

V = 100
 
Is this correct?
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top