How Does an External Magnetic Field Impact Solenoid Performance?

AI Thread Summary
The performance of a solenoid is unaffected by a constant external magnetic field if the solenoid is fixed in place. However, if the external field varies or the solenoid is movable, the rate at which the magnetic field is established within the solenoid is altered, as described by Faraday's law. Additionally, when two identical air-core solenoids are connected in parallel with an alternating current, the current through each should remain identical. The inductance of this parallel circuit will differ from that of a single solenoid with double the length, raising questions about mutual inductance calculations. Understanding these concepts is crucial for accurate analysis of solenoid behavior in varying magnetic environments.
NuclearUSA
Messages
3
Reaction score
0
I was wondering, are there significant effects on the performance of a solenoid when the solenoid is inside an external magnetic field? Does it affect the rate at which the magnetic field is established within the solenoid?
 
Physics news on Phys.org
Welcome NuclearUSA.
If the external field is constant & the solenoid is fixed , no effect will be observed.
If the external field varies with time or the solenoid is not fastened, the rate is clearly altered ; which can be calculated by Faraday's law. Read more about inductors.
 
I do have another question on a related note for which I have found no satisfactory answer in the reading I have done on the subject. Say we have two identical air-core solenoids that are placed face-to-face. The coils are then connected in parallel with an alternating current source. Since the coils are identical, the current flowing through them should be identical. How will the inductance of this circuit compare with a circuit composed of a single solenoid of equal dimensions to the previous set combined (2x the length of one of the original's and everything else the same).
 
I have done reading on mutual inductance, but the definitions and equations given are quite cryptic and I am not sure how to use them in calculations.
 
Thread 'Griffith, Electrodynamics, 4th Edition, Example 4.8. (Second part)'
I am reading the Griffith, Electrodynamics book, 4th edition, Example 4.8. I want to understand some issues more correctly. It's a little bit difficult to understand now. > Example 4.8. Suppose the entire region below the plane ##z=0## in Fig. 4.28 is filled with uniform linear dielectric material of susceptibility ##\chi_e##. Calculate the force on a point charge ##q## situated a distance ##d## above the origin. In the page 196, in the first paragraph, the author argues as follows ...
Thread 'Inducing EMF Through a Coil: Understanding Flux'
Thank you for reading my post. I can understand why a change in magnetic flux through a conducting surface would induce an emf, but how does this work when inducing an emf through a coil? How does the flux through the empty space between the wires have an effect on the electrons in the wire itself? In the image below is a coil with a magnetic field going through the space between the wires but not necessarily through the wires themselves. Thank you.
Back
Top