How Long Does Is take for a car to go from 0-60 MPH

  • Thread starter Thread starter lorenamtimas
  • Start date Start date
  • Tags Tags
    Car
AI Thread Summary
A car accelerating at 9.8 m/s² takes approximately 2.74 to 2.77 seconds to go from 0 to 60 MPH. The calculation involves converting 60 MPH to meters per second, resulting in about 26.82 m/s. Using the formula for acceleration, the time is derived by dividing the final velocity by the acceleration. While the initial approach used mixed units, the correct method emphasizes converting all units to a single system for clarity. Understanding these conversions and calculations is essential for solving similar physics problems effectively.
lorenamtimas
Messages
4
Reaction score
0

Homework Statement



A car accelerates at 9.8m/s^2 How long does it take to go from 0-60 MPH?

Homework Equations



I don't know which ones may be relevant, this is where I'm stumped.

The Attempt at a Solution



I somehow got 2.77 seconds as an answer but I'm not sure how I got it. I am new to physics; Conceptual Physics is my very first Physics class and I'm having an awfully difficult time understanding. Thank You.
 
Physics news on Phys.org
Your answer is pretty close to the correct one.

Perhaps you could recall how you got and explain to us why you did this or that. And we will help if you get confused along the way.
 
voko said:
Your answer is pretty close to the correct one.

Perhaps you could recall how you got and explain to us why you did this or that. And we will help if you get confused along the way.

Well this is what I did:

I converted 9.8m to miles and got this 0.00609mi
I then divided this # by 10,000 to get as close to 60 miles as I could get, which resulted in 60.9mi
I then divided 10,000 by 3600 (the amount of seconds in as hour) which gave me 2.77seconds.
I'm still not clear as to why I made these choices but they seemed to make sense to me for some reason.
 
Here is what you did.

You converted ## 9.8 \frac {m} {s^2} ## to ## 0.00609 \frac {mile} {s^2} ##, which is a little unusual but technically correct.

Then you found that ## \displaystyle \frac { 60 \frac {mile} {hour} } {0.00609 \frac {mile} {s^2}} \cong 10000 \frac {s} {hour} s ##.

Finally, because ## \frac {s} {hour} = \frac 1 {3600} ##, you got ## 10000 \frac {s} {hour} s = \frac {1000} {3600} s ## = 2.78 s.

All of this is correct, but, as I said, is unusual. The unusuality is that you did not convert all units to one system, but kept mixed units throughout. Typically one converts all the different units to one system, then computes, and then, if required, converts to other units.

Here is how I would do it.

Convert 60 MPH to m/s. Because one mile is 1609.34 m, and 1 hour is 3600 seconds, 60 MPH = 60 * 1609.4/3600 m/s = 26.82 m/s. Now we have the velocity and the acceleration in one system of units, SI (meters and seconds), and 26.82 m/s / 9.8 m/s^2 = 2.74 s.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top