How to find the time of two object passing each at opposite direction.

  • Thread starter Thread starter louis676
  • Start date Start date
  • Tags Tags
    Direction Time
AI Thread Summary
A ball dropped from 79 m and another thrown upward at 28 m/s are analyzed to determine the time they meet at the same height. The equations of motion for both objects are set equal to find the time, resulting in Δt = 2.8 seconds. Substituting this time back into both equations confirms that the heights are approximately equal, validating the calculation. The approach taken is correct, and maintaining more decimal places in intermediate calculations is suggested for accuracy. The final conclusion affirms that the answer is accurate.
louis676
Messages
26
Reaction score
0
1. A ball is dropped from a height of 79 m. Simultaneously a ball is thrown upward from the ground at a velocity of 28 m/s. How much time passes until the balls are at the same height.

I need someone to check if my approach is correct.
Position of falling object
x =?
Δt =?
Xo = 79 m
Vo = 0 m/s
A = -9.8 m/s 2

X = Xo + Vo Δt + .5a (Δt) 2
X = 79 m + 0m/s (Δt) + .5(-9.8 m/s 2) (Δt) 2
X = 79 m - 4.9 m/s 2(Δt) 2Position of elevating object
x =?
Δt =?
Xo = 0 m
Vo = 28 m/s
A = -9.8 m/s 2

X = Xo + Vo Δt + .5a (Δt) 2
X (Δt) = 0m + 28m/s Δt + .5a (Δt) 2
X (Δt) = 28 m/s (Δt) + .5(-9.8 m/s 2) (Δt) 2
X (Δt) = 28 m/s (Δt) – 4.9 m/s 2 (Δt) 2

To find the time, we need to set both the equation equal to each other.
79 m – 4.9 m/s 2 (Δt) 2 = 28 m/s (Δt) - 4.9 m/s 2(Δt) 2
79m = 28 m/s (Δt)
2.8 s = Δt

Then I replace 2.8 for t in both of the equation and check if my time is correct

X = 79 m – 4.9 m/s 2 (Δt)2
X = 79 m – 4.9 m/s 2 (2.8 s)2
X = 79 m - 4.9 m/s 2 (7.84s 2)
X = 79 m - 38.416 m
X = 40.6 m

X = 28 m/s (Δt) – 4.9 m/s 2 (Δt) 2
X = 28 m/s (2.8s) - 4.9 m/s 2 (2.8 s)2
X = 78.4 m - 38.416 m
X = 40 m
The answer is approximately the same.
 
Physics news on Phys.org
Your approach is fine, and the result of 2.8s is good (at least to one decimal).

Keeping a few more decimal places in intermediate results would make your check of the answer more convincing :wink:
 
So my answer is correct, right?
 
louis676 said:
So my answer is correct, right?

I believe that is what I stated...
 
Alrite thank you so much.
 
louis676 said:
Alrite thank you so much.

No problem. Cheers :smile:
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top