Induced Current in a Coil with Changing Magnetic Field

AI Thread Summary
The discussion focuses on calculating the induced current in a coil with a changing magnetic field. The coil has a diameter of 5.0 cm, 20 turns, and a resistance of 0.50Ω. The magnetic field is defined as B=0.020t+0.010t^2, leading to the expression for magnetic flux. The correct induced current expression is derived as I = (20πr^2(0.020 + 0.020t))/R, incorporating the number of turns in the coil. The final answer reflects the relationship between magnetic flux and induced current accurately.
BrainMan
Messages
279
Reaction score
2

Homework Statement


A 5.0-cm-diameter coil has 20 turns and a resistance of 0.50Ω. A magnetic field perpendicular to the coil is B=0.020t+0.010t^2, where B is in tesla and t is in seconds.

Find an expression for the induced current I(t) as a function of time.

Homework Equations

The Attempt at a Solution

\varepsilon = \frac{d\phi}{dt}
\varepsilon dt = d\phi
\int\varepsilon dt = \int d\phi
\phi = (0.020t + .010t^2) * \pi r^2
\varepsilon \int dt = \int d\phi
\varepsilon t = \pi r^2 [ (1/2) (0.020t^2) + (1/3)(.010t^3)]
\varepsilon = \frac {I}{R}
I = \frac{\pi r^2 [ (1/2) (0.020t^2) + (1/3)(.010t^3)]}{tR}
 
Physics news on Phys.org
BrainMan said:
\varepsilon = \frac{d\phi}{dt}
OK, except you haven't taken into account that you have 20 turns in the coil.

\varepsilon dt = d\phi
\int\varepsilon dt = \int d\phi
Don't do this.

Use your expression ## \phi = (0.020t + .010t^2) * \pi r^2 ## in ## \varepsilon = \frac{d\phi}{dt} ## along with the correction for the 20 turns.
 
  • Like
Likes BrainMan
TSny said:
OK, except you haven't taken into account that you have 20 turns in the coil.Don't do this.

Use your expression ## \phi = (0.020t + .010t^2) * \pi r^2 ## in ## \varepsilon = \frac{d\phi}{dt} ## along with the correction for the 20 turns.

So I = \frac{20\pi r^2 [ (1/2) (0.020t^2) + (1/3)(.010t^3)]}{R}

So like this?
 
BrainMan said:
So I = \frac{20\pi r^2 [ (1/2) (0.020t^2) + (1/3)(.010t^3)]}{R}

So like this?
No. The numerator in your expression for ##I## does not equal ##\varepsilon##.

If ## \phi = (0.020t + .010t^2) * \pi r^2 ##, then what is ##\frac{d\phi}{dt} ##?
 
  • Like
Likes BrainMan
TSny said:
No. The numerator in your expression for ##I## does not equal ##\varepsilon##.

If ## \phi = (0.020t + .010t^2) * \pi r^2 ##, then what is ##\frac{d\phi}{dt} ##?

Oh ok I get it now. The answer should be \frac {20\pi r^2(0.020+.020t)}{R}
 
BrainMan said:
The answer should be \frac {20\pi r^2(0.020+.020t)}{R}
Looks good.
 
  • Like
Likes BrainMan
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top