Mastering DSP: Fourier Series & Transforms

AI Thread Summary
To master Digital Signal Processing (DSP) and Fourier series and transforms quickly, it's recommended to start with Laplace transforms before progressing to Fourier and Z transforms. A highly regarded resource is "Introduction to Digital Signal Processing" by Johnny R. Johnson, which is beneficial for newcomers. Another essential text is the Oppenheim-Schafer book, considered a foundational reference in the field. However, achieving mastery in this complex subject is challenging and typically requires substantial study time, especially for those without a strong math background. Quick mastery may not be realistic unless one has advanced mathematical skills.
madchiller
Messages
8
Reaction score
0
hi i wanted to know if anybody that knew about dsp and all the Fourier series and transforms had any advice on how to master it ... very swiftly..
 
Engineering news on Phys.org
madchiller said:
hi i wanted to know if anybody that knew about dsp and all the Fourier series and transforms had any advice on how to master it ... very swiftly..

Hmmm...Looking for a short-cut, eh?
Is it for here, or to-go? Do you need ketchup with that? Just kidding :).

When I was a TA, I recommended this book that cuts to the chase: Introduction to Digital Signal Processing, by Johnny R Johnson. It was pretty helpful to the new comers to DSP.

You need some background on integral transforms.
Start from Laplace transforms and then quickly move into Fourier and z and what have you...

The best book is by Oppenheim-Schafer. Its a bible...
 
thanks a lot so if I understood you right i start with LAPPLACE and I go on with the rest, thanks a lot of replying and for the book tip.
 
sai_2008 said:
The best book is by Oppenheim-Schafer. Its a bible...

lol, i have this. it ain't no shortcut.

i don't think master and quickly really go together here unless you're already a math savant, which is why you get few replies. i just had the one college course (roughly, 10 weeks), and didn't come away feeling like i had "mastered" the subject.
 
i have an applied & pure math degree just getting adjusted to the " engineering " math notation ...
 
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
Thread 'How Does Jaguar's 1980s V12 Dual Coil Ignition System Enhance Spark Strength?'
I have come across a dual coil ignition system as used by Jaguar on their V12 in the 1980's. It uses two ignition coils with their primary windings wired in parallel. The primary coil has its secondary winding wired to the distributor and then to the spark plugs as is standard practice. However, the auxiliary coil has it secondary winding output sealed off. The purpose of the system was to provide a stronger spark to the plugs, always a difficult task with the very short dwell time of a...
Back
Top