Need help finding an oscilloscope

  • Thread starter Thread starter jack112286
  • Start date Start date
  • Tags Tags
    Oscilloscope
AI Thread Summary
An individual is seeking an oscilloscope with at least two channels, a recording capability, a minimum bandwidth of 50 MHz, and the ability to output stored readings, all for under $1000. The primary use is for diagnosing automotive electrical components, specifically low voltage applications (0-15 V). Recommendations include checking out brands like Rigol for affordable options. There is also mention of USB oscilloscopes as a modern alternative to older PC slot boards. The discussion highlights the importance of finding a tool that meets specific technical requirements for effective learning and diagnostics.
jack112286
Messages
2
Reaction score
0
Hi guys, I am in the market looking for an oscilloscope, but I am having trouble looking for one.

Here`s what I require:

At least 2 channel (4 would be better but not required)
Able to record the reading
at least 50 MHz
Be able to output stored readings(this is the part I am having a hard time doing).
Hopefully under $1000 all said and done

I want to be able to use this tool for diagnosing electrical components and learn (play) more about electrical components, mainly automotive related.

Say for example, I have a magnetic pickup sensor, I want to be able to test it. Store the data, output the store data to the computer.

Thank you very much. I have found this forum with many learning information.
 
Engineering news on Phys.org
Oh I forgot. It is mainly low voltage application. 0 - 15 V
 
Used to be boards that plug into a PC slot to give it o'scope capacity.
oh my goodness now they've got it for USB !

http://www.usbee.com/

i'm a model T in a Prius world.
 
jack112286 said:
Hi guys, I am in the market looking for an oscilloscope, but I am having trouble looking for one.

Here`s what I require:

At least 2 channel (4 would be better but not required)
Able to record the reading
at least 50 MHz
Be able to output stored readings(this is the part I am having a hard time doing).
Hopefully under $1000 all said and done

I want to be able to use this tool for diagnosing electrical components and learn (play) more about electrical components, mainly automotive related.

Say for example, I have a magnetic pickup sensor, I want to be able to test it. Store the data, output the store data to the computer.

Thank you very much. I have found this forum with many learning information.

Welcome to the PF.

You'll also find some helpful info in the "Related Threads" links at the bottom of the page here in your thread.
 
I could check out http://www.bncscientific.com and see what they have. I think they carry Rigol, but their stuff isn't overly expensive. You can usually get something of pretty good quality for cheap.
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
Back
Top