Non-Constant Acceleration Problem

AI Thread Summary
The problem involves calculating the distance traveled by a Tesla with a non-constant acceleration defined as a(t) = 1 m/s^4 * t^2 over a 10-second interval. To solve this, the velocity function is derived by integrating the acceleration function, resulting in v(t) = t^3/3. Further integration of the velocity function gives the position function, leading to x(t) = t^4/12. When evaluated at t = 10 seconds, the car travels a distance of 833.3 meters. The calculations and approach are confirmed to be correct.
Jewelz
Messages
8
Reaction score
0

Homework Statement


A new Tesla is designed that can perform a non-constant acceleration for 10 seconds of motion. The magnitude of the acceleration is given as a(t) = 1 m/s4t2

Starting from rest, how far does the car travel over this 10 second interval?

Homework Equations


This is what is making the question difficult for me. I am unsure what equations to use with a non-constant acceleration.

The Attempt at a Solution


I tried solving it manipulating the constant velocity and acceleration equations, but everything I have tried has been wrong. Even if someone could point me in the right directions equations wise, I'm sure that would help me a lot.

Thanks
 
Physics news on Phys.org
Hi, you can find the velocity function respect to ##t## that is ##v(t)=\int_{0}^{t} a(s)ds## and after the space ##x(t)=\int_{0}^{t}v(s)ds##, put ##t=10 s## in ##x(t)## ...
Ssnow
 
Jewelz said:

Homework Statement


A new Tesla is designed that can perform a non-constant acceleration for 10 seconds of motion. The magnitude of the acceleration is given as a(t) = 1 m/s4t2

Starting from rest, how far does the car travel over this 10 second interval?

Homework Equations


This is what is making the question difficult for me. I am unsure what equations to use with a non-constant acceleration.

The Attempt at a Solution


I tried solving it manipulating the constant velocity and acceleration equations, but everything I have tried has been wrong. Even if someone could point me in the right directions equations wise, I'm sure that would help me a lot.

Thanks

Your input is hard to read; I assume you mean ##a = k t^2,## where ##k = 1 m/s^4.##

Anyway, you get velocity ##v## by integrating ##a## with respect to ##t##, and then you get position by integrating ##v##. No amount of manipulation of the constant-acceleration formulas can do what you need.
 
Last edited:
Ray Vickson said:
Your input is hard to read; I assume you mean ##a = k t^2,## where ##k = 1 m/s^4.##

Anyway, you get velocity ##v## by integrating ##a## with respect to ##t##, and then you get position by integrating ##v##. No amount of manipulation of the constant-acceleration formulas can do what you need.
Your assumption is correct.

After integrating the acceleration function with respect to time, with the bounds of the integral from ##0## to ##t##, I obtained the function ##t^3/3## for the velocity. Integrating that, from 0 to t for the integral, I got ##t^4/12##, and plugging in ##t## (10 seconds), I obtained a final answer of 833.3m traveled.

Does this all sound correct?
 
Jewelz said:
Your assumption is correct.

After integrating the acceleration function with respect to time, with the bounds of the integral from ##0## to ##t##, I obtained the function ##t^3/3## for the velocity. Integrating that, from 0 to t for the integral, I got ##t^4/12##, and plugging in ##t## (10 seconds), I obtained a final answer of 833.3m traveled.

Does this all sound correct?

It does.
 
Jewelz said:
Your assumption is correct.

After integrating the acceleration function with respect to time, with the bounds of the integral from ##0## to ##t##, I obtained the function ##t^3/3## for the velocity. Integrating that, from 0 to t for the integral, I got ##t^4/12##, and plugging in ##t## (10 seconds), I obtained a final answer of 833.3m traveled.

Does this all sound correct?
Yes, perfect.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top