Object Distance for Mirrors versus Lenses

  • Thread starter Thread starter C. Long
  • Start date Start date
  • Tags Tags
    Lenses Mirrors
AI Thread Summary
Object distance for mirrors can be negative when the incoming light is on the opposite side of the mirror from the object. This situation raises confusion about image formation, as it seems counterintuitive that an image could be created if the light is blocked by the mirror. The discussion suggests a potential misunderstanding of the sign convention, possibly conflating object distance with image distance. Clarification is sought on whether the quoted definition might be misinterpreted or if it pertains to the image being formed behind the mirror. Ultimately, the consensus is that if the object and light are on opposite sides, no image can be formed.
C. Long
Messages
10
Reaction score
0
We are finishing up light and I'm a little confused on when the object distance would be negative when we are talking about mirrors and not lenses. The definition we were given is that the object distance is negative if the incoming light is on the opposite side of the mirror then the object is. I don't understand how\if that would make any images of the object, wouldn't the mirror be in the way of the incident light?

Thanks for any clarification.
 
Science news on Phys.org
I googled sign convention lens mirror and, amongst a lot of hits, http://www.physics.gla.ac.uk/~johannes/optics_lecture/overheads06_1_3_7-1_4_3.pdf . Any use?
 
Last edited by a moderator:
Thanks. It still looks like there wouldn't be any way the light could create an image if they are on opposite sides of a mirror.
 
I haven't read the actual passage that you are quoting from. Are you sure it isn't talking of the image being behind the mirror? IS it just a translation problem?
 
I can understand how the image distance can be positive or negative, I just don't see any instance when the object distance would be considered negative and you still get any kind of image. If the physical object is on one side of the mirror and the incident rays are coming from the other, then that tells me there would be no image formed real or virtual.
 
Thread 'Simple math model for a Particle Image Velocimetry system'
Hello togehter, I am new to this forum and hope this post followed all the guidelines here (I tried to summarized my issue as clean as possible, two pictures are attached). I would appreciate every help: I am doing research on a Particle Image Velocimetry (PIV) system. For this I want to set a simple math model for the system. I hope you can help me out. Regarding this I have 2 main Questions. 1. I am trying to find a math model which is describing what is happening in a simple Particle...
Thread 'How to model converging illumination through object plane (in ZEMAX)'
Hello community, I'm designing a projection lens system for a 35mm film projector in Zemax OpticStudio and struggling with the correct sequential mode setup for the illumination geometry. The light source is a Xenon short-arc lamp reflected by an ellipsoid mirror, which creates a converging cone with a 40.6 degree full angle that passes through the film gate. The film gate is my object plane, but the light doesn't diverge from it like a typical Lambertian source. Instead, the converging...
Back
Top