Oscillations and Waves of a spring

AI Thread Summary
A 2.00-kg object attached to a spring experiences simple harmonic oscillations after being pulled 0.200 m from its equilibrium position with a force of 20.0 N. The spring constant is calculated to be 1000 N/m, and the angular frequency is determined to be approximately 22.36 s^-1. The maximum speed of the object is found to be 4.472 m/s, occurring at the equilibrium position, while the maximum acceleration is calculated using the formula a = -ω²x. The total energy of the system is given by E = 0.5 k A², and the acceleration can be found using a = -ω²x for a position equal to one third of the maximum displacement. The discussion emphasizes the importance of correctly applying formulas and understanding the relationships between potential and kinetic energy in oscillating systems.
ilovephysicssomuch
Messages
23
Reaction score
0
Can someone please help me with this question?:confused:

A 2.00-kg object is attached to a spring and placed on a horizontal, smooth surface. A horizontal force of 20.0 N is required to hold the object at rest when it is pulled 0.200 m from its equilibrium position (the origin of the x axis) The object is now released from rest with an initial position of x= 0.200m, and it subsequenly undergoes simple harmonic oscillations. Find
(a) the force constant of the spring,
(b) the frequency of the oscillations, and
(c) the maximum speed of the object. Where does this maximum speed occur?
(d) Find the maximum acceleration of the object. Where does it occur?
(e) Find the total energy of the oscillation system.
(f) Find the speed
(g) Find the acceleration of the object when its position is equal to one third of the maximum value.
 
Physics news on Phys.org
Can you show some of your working/thoughts?
 
Tina is that you? Please show us your work lol.
 
my work

Here is my work... I'm not 100% sure.. This questions is hard...
Mass = 2.00 kg
F= 20.0 N
x = 0.200m

(a) finding K
F= 0.5kx^2 if that is the right formula
20.0 N = 0.5k(0.2)^2
K= 1000 N/m

(b) Since w is also frequency but is in s^-1
w= (k/m)^1/2
w= (1000/2.00)^1/2
w= 22.36 s^-1

(c) Vmax = wA... What is A? I am treating A as being the same as x.. I don't know how to do this question.
Vmax = (22.36)(0.2)
Vmax = 4.472 m/s
Where does it occur?? no idea what formula to use.

(d) Amax = w^2A.. again?? is this the right formula?

(e) Total energy?
E = 0.5 kA^2 or is it kinetic energy + potential energy??

(f) Find the speed.. formula for speed is
v = w/k..
so if this is right.. then
22.36/1000.. so v is 0.02236

(g) No idea


Please Help me!:confused:
 
(a) The spring constant, k is given by Hooke's law for springs: F = -kx. I think you answer is wrong by a factor of ten.

(b)It looks like you've worked out \omega correctly but remember f = \frac{\omega}{2\pi}. Your error in (a) follows through here.

(c)Your formula is correct but there are follow through errors from the previous questions, A is amplitude or maximum displacement. As the spring is stretch it gains elastic potential energy. Once the spring is released and begins to recoil the elastic potential energy is converted to kinetic energy. When the spring is in neither compression or tension there is no elastic potential energy in the spring, the energy of the system must remain constant therefore all of the elastic potential energy must be in the form of kinetic energy. So where is the velocity the greatest?

(d)Correct formula except a = -\omega^2 x because the acceleration is always in the opposite direction to the displacement (towards the equilibrium position)

(e)Your forumla E = \frac{1}{2} k Ais correct.

(f)I don't understand the question. Find the speed when? The speed is variable in any mass/spring system.

(g)a = -\omega^2 x where x is displacement. You know the amplitude so x = \frac{1}{3}A
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top