Physics Homework problem: Dielectrics

AI Thread Summary
The discussion revolves around a physics homework problem involving a 3500 air-gap capacitor connected to a 32V battery and the effect of inserting mica as a dielectric. Participants clarify the initial charge calculation for the air-gap capacitor, with the charge determined to be 1.12E-4 C. The dielectric constant for mica (K=7) is discussed, highlighting its impact on capacitance. There is some confusion regarding the capacitor's specifications, specifically whether it is measured in microfarads or nanofarads. Ultimately, the original poster resolves the problem independently and expresses gratitude for the assistance.
Jscrub
Messages
15
Reaction score
0
I cannot figure out this problem...can someone help me?

A 3500 air-gap capacitor is connected to a 32 battery.

If a piece of mica fills the space between the plates, how much charge will flow from the battery?


Express your answer using two significant figures.
 
Physics news on Phys.org
Welcome to PF!

Hi Jscrub! Welcome to PF! :wink:

First, how much charge will flow from the battery when the gap is just air?

Second, what equations do you know about how a dielectric affects a field or a capacitor? :smile:
 
c= KCo

c=Q/V

Q Air = 1.12E-4
 
v= 32 V

K(mica) = 7

K (air) = 1.0006

so, Co= 1.12E-4
 
Jscrub said:
A 3500 air-gap capacitor is connected to a 32 battery.

What is a 3500 air-gap capacitor?

Is that a 3500μf capacitor or 3500nf?

What is the effect of the dielectric on the capacitance?

I don't follow your conclusion
so, Co= 1.12E-4

Haven't you added a dielectric to your capacitor?
 
The above was not a conclusion..it was just a reply to the previous person...

Co = 3500E-9...

But it is fine..I don't need anymore help...I figured it out...

Thanks
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »

Similar threads

Why can we model spherical capacitor with two dielectrics as two capacitors in series?
Replies
4
Views
2K
Calculations involving different Dielectrics and Capacitors
Replies
7
Views
2K
Electric field between capacitor plates when a dielectric slab is inserted
Replies
14
Views
2K
Which of the two dielectrics breaks down first?
Replies
2
Views
1K
Changes in capacitor after dielectric inserted
Replies
17
Views
3K
Question about charged capacitors and inserting a dielectric into one
Replies
3
Views
2K
A 3500-pF air-gap capacitor question
Replies
2
Views
4K
Find Dielectric Constant from Parallel Plate Capacitor Problem
Replies
1
Views
2K
Finding Minimum Plate Separation for Mica-Filled Capacitor
Replies
6
Views
4K
How Does Inserting Different Dielectric Materials Affect Capacitor Performance?
Replies
9
Views
3K

Hot Threads

Recent Insights

Back
Top